Eiki Projector Lc Wb100 User Manual

1

How to Operate the On-Screen Menu
The	projector	can	be	adjusted	or	set	via	the	On-Screen	
Menu.	The	menus	have	a	hierarchical	structure,	with	
a	main	menu	that	is	divided	into	submenus,	which	are	
further	divided	into	other	submenus.	For	each	adjustment	
and	setting	procedure,	refer	to	respective	sections	in	this	
manual.
Use	the	Point	
▲▼	buttons	to	highlight	or	select	a	main	
menu	item.	Press	the	Point	
►	or	the  SELECT 	button	
to	access	the	submenu	items.	(The	selected	item	is	
highlighted...



Menu Bar
For	detailed	functions	of	each	menu,	see	“Menu	Tree”	on	pages	70-71.
Main	MenuSub-Menu
	Image select
	For	computer	source,	used	to	select	an	image	mode	from	among	Dynamic,	Standard ,	Real,	Blackboard(Green) ,	
Colorboard	and	image	1 - 4	(p.33).	
						For	Video	source,	used	to	select	an	image	mode	among	
Dynamic ,	Standard ,	Cinema,	Blackboard(Green) ,	Colorboard	
and	
Image 1- 4 	(p.40).
	Image adjust
	 For	computer	source,	used	to	adjust	computer	image	[
Contrast ,	Brightness ,...



Rotate	the	Zoom	Ring	to	zoom	in	and	out.		
Rotate	the	Focus	Ring	to	adjust	the	focus	of	the	image.		
Zoom and Focus Adjustment
If	a	projected	picture	still	has	keystone	distortion	after	
pressing	the	AUTO	SETUP 	button	on	the	top	control	or	the	
AUTO	SET 	button	on	the	remote	control,	correct	the	image	
manually	as	follows:
Press	the	KEYSTONE	button	on	the	remote	control.	 The	
Keystone	dialog	box	appears.	Use	the	Point	
▲▼	buttons	to	
correct	keystone	distortion.	 The	keystone	adjustment...

4

Sound Adjustment
1

Press	the	MENU	 button	to	display	 the	On-Screen	 Menu.	
Use 	the 	Point 	
▲▼	buttons 	to 	select 	Sound .	 Press 	the	
Point	
►	 or	 the	 SELECT 	button	 to	access	 the	submenu	
items.	
Press	the	VOLUME+/–	buttons	on	the	top	control	or	on	the	
remote	control	to	adjust	the	volume.	 The	volume	dialog	box	
appears	on	the	screen	for	a	few	seconds.
Press	the	MUTE	button	on	the	remote	control	to	select	On	
to	temporarily	turn	off	the	sound.	 To	turn	the	sound	back	
on,	press...

5

Remote Control Operation
Using	the	remote	control	for	some	frequently	used	operations	is	advisable.	Just	pressing	one	of	the	buttons	
enables	you	to	make	the	desired	operation	quickly	without	calling	up	the	On-Screen	Menu.
Press	the	COMPUTER	1/2,	HDMI,	VIDEO,	S-VIDEO	and	
COMPONENT	buttons	on	the	remote	control	to	select	the	
input	source.	See	pages	27-28,37-38	for	details.
COMPUTER 1/, HDMI, VIDEO, S-VIDEO and 
COMPONENT  buttons
Press	the	FREEZE	button	on	the	remote	control	to	freeze	
the...

6

black	out	→		normal	→	black	out	→		normal	→•	•	•	•	•
Press	the	NO	SHOW	button	on	the	remote	control	to	black	out	
the	image.	 To	restore	to	normal,	press	the	NO	SHOW	button	
again	or	press	any	other	button.	 The	screen	changes	each	time	
you	press	the	NO	SHOW	button	as	follows.
NO SHOW button
Press	the	P-TIMER	button	on	the	remote	control.	 The	P-Timer	
display	
00:00 	appears	on	the	screen	and	the	countdown	starts	
(00:00–59:59).
To	stop	the	countdown,	press	the	P-TIMER	button.	 To	cancel	
the...

7

Choose	Computer 1(RGB)	by	pressing	the	INPUT 	button	on	the	top	control	or	press	the	COMPUTER	1	button	
on	the	remote	control.	
Before	using	INPUT 	button,	correct	input	source	should	be	selected	through	Menu	operation	as	described	
below.
1
Input Menu


Input Source Selection (Computer 1: RGB )
Computer Input 
Note:
	 	 When	the	Input	Search	function	is	set	to	On1	or	On 	in	
the	 Auto	setup	function,	the	input	signal	will	be	searched	
automatically	(p.45).
Computer 1
Top...

8

Choose	Computer  (RGB)	by	 pressing	 the	INPUT 	button	 on	the	 top	control	 or	press	 the	COMPUTER	 2	button	
on	the	remote	control.
Input Source Selection (Computer : RGB)
Direct Operation
Menu Operation
Note:
	 	 When	 the	Input	 Search	 function	 is	set	 to	On1 	or	 On ,	
the	input	signal	will	be	searched	automatically	(p.45).
COMPUTER  button
Top ControlRemote Control
1

Press	the	MENU	button	to	display	the	On-Screen	
Menu.	Use	the	Point	
▲▼	buttons	to	select	Input...



PC System Menu
PC System Menu
Computer System Selection
This	projector	automatically	tunes	to	various	types	of	computers	based	on	VGA,	SVGA,	XGA,	SXGA,	WXGA,
UXGA	or	WUXGA 	with	its	Multi-scan	system	and	 Auto	PC	adjustment.	If	a	computer	is	selected	as	a	signal	
source,	this	projector	automatically	detects	the	signal	format	and	tunes	to	project	a	proper	image	without	any	
additional	settings.	(Signal	formats	provided	in	this	projector	are	shown	on	pages	73-74.)
One	of	the	following	messages...

0

Auto	PC	adjustment	function	is	provided	to	automatically	adjust	Fine sync,	Total dots ,	Horizontal 	and	Vertical	
positions	to	conform	to	your	computer.
PC adjust Menu
Auto PC adjustment
To store adjustment parameters
The	 adjusted	 parameters	 from	the	Auto	 PC	adjustment	 can	
be	 stored	 in	the	 projector.	 Once	the	parameters	 are	stored,	
the	 setting	 can	be	done	 just	by	selecting 	a	
Mode  (1–5) 	in	
the 	PC 	System 	Menu 	(see 	page 	29). 	See 	also 	“Store” 	on	
page	32.
Note:
	 •...