Eiki Projector Lc Wb100 User Manual

71

AutoPALSECAMNTSCNTSC	4.43PAL-MPAL-N
Video Input
Auto1080i1035i720p575p480p575i480i
Dynamic
CinemaBlackboard	(Green)
Image	1Image	2Image	3
0–630–63
Off
Setting
Image select
System (2)
System (3)
Image adjustContrastBrightnessColorTint
RedGreenBlueSharpness
ResetStore
Gamma
Progressive
0–630–630–630–15	0–15
Image	1Yes/No
Image	4
Standard
OffNoise	reductionL1L2
0–630–63
Image	2Image	3Image	4
L2L1
Film
Color	temp.
ColorboardRed/Blue/Yellow/Green
AppendixAppendix
MidLowXLow
User
High
NormalScreen
Wide...

7

Check	the	indicators	for	projector	condition.																																			
•	•	•	green.•	•	•	red•	•	•	off
•	•	•	blinks	green.
When	the	projection	lamp	reaches	its	end	of	life,	the	LAMP	REPLACE	indicator	lights	yellow.	When	this	indicator	
lights	yellow,	replace	the	projection	lamp	with	a	new	one	promptly.
The	projector	is	off.	(The	 AC	power	cord	is	unplugged.)
The	projector	is	in	stand-by	mode.	Press	the	ON/STAND-BY 	button	
to	turn	on	the	projector.
Projector ConditionPOWERred/green...

7

Compatible Computer Specifications
Basically	this	projector	can	accept	the	signal	from	all	computers	with	the	V-,	H-Frequency	mentioned	below	
and	less	than	140	MHz	of	Dot	Clock.		When	selecting	these	modes,	PC	adjustment	can	be	limited.
Note:
				 The	specifications	are	subject	to	change	without	notice.
Appendix
ON-SCREEN 
DISPLA yRESOLUTIONH-Freq .(KHz)V-Freq .(Hz)
VGA	1640	x	48031.4759.88
VGA	2720	x	40031.4770.09
VGA	3640	x	40031.4770.09
VGA	4640	x	48037.8674.38
VGA	5640	x	48037.8672.81
VGA...

74

Appendix
ON-SCREEN DISPLA yRESOLUTIONH-Freq .(KHz)V-Freq .(Hz)
D-VGA640	x	48031.4759.94
D-480p720	x	480----59.94
D-575p720	x	575----50.00
D-SVGA800	x	60037.87960.32
D-WXGA 	11366	x	76848.3660.00
ON-SCREEN 
DISPLA yRESOLUTIONH-Freq .(KHz)V-Freq .(Hz)
D-1035i1920	x	1035
D-1080i1920	x	1080
D-1080i1920	x	1080
33.7560.00(Interlace)
33.7560.00(Interlace)
28.12550.00(Interlace)D-XGA1024	x	76843.36360.00
D-WXGA 	21360	x	76847.760.00
D-WXGA	31376	x	76848.3660.00
Note:
	 •	When	the	input	signal	is	D-SXGA 	1,...

75

List of Picture in Picture
	o	:	Picture	in	Picture	combinations	are	enabled
	-	:	Picture	in	Picture	combinations	are	disabled
Note:	 •		When	the	input	signal(s)	is/are	incompatible,	X	mark	will	be	displayed	on	the	Main/Sub	picture.
	 •		 Depending	 on	the	 frequency	 or	signal	 type	of	PC/AV	 input,	the	display	 resolution	 may	be	lowered	 or
	images	 may	not	be	displayed 	on	
the	Main/Sub	picture.
　　 
	 	 •		Inputting	 PC	analog	signals:	Between	100-140	MHz
　　
	 	•		Inputting	 PC	analog	signals:...

76

Technical Specifications
Mechanical Information 	
	 Projector	Type	 Multi-media	Projector	
	 Dimensions	(W	x	H	x	D)	 12.80"	x		3.27"	x		9.12"	(326mm	x	83.1mm	x	231.6mm)		 (Not	including	protrusions)
	
	 Net	Weight	 6.18	lbs	(2.8	kg)
	
	 Feet	 Adjustment	 0˚	to	12˚	 	 	 	 	 	
	 		 	 	 	 	 	
Panel Resolution 	
	 LCD	Panel	System	0.59"	TFT	Active	Matrix	type,	3	panels		
	 Panel	Resolution	 1,280	x	800	dots
	
	 Number	of	Pixels	 3,072,000	(1,280	x	800	x	3	panels)...

77

     Model	No.
COMPONENT-VGA Cable                 : AH-8771
SCART-VGA Cable                            : AH-8881
The	parts	listed	below	are	optionally	available.	When	ordering	those	parts,	specify	the	item	name	and	Model	No.	
to	the	sales	dealer.
Optional Parts
Accessories
	 Owner’s	Manual	(CD-ROM)
			Quick	Reference	Guide	&	Safety	Manual
	
	 Soft	Carrying	Case
	 AC	Power	Cord
	
	 Remote	Control	and	Batteries	 	 	 	 	 	 	 	 	 	 	
	 VGA 	Cable
	Lens	Cap	with	String		
	 PIN	Code	Label...

78

This	projector	is	compliant	with	PJLink	Standard	Class	1	of	JBMIA	(Japan	Business	Machine	and	Information	
System	Industries	 Association).	This	projector	supports	all	commands	defined	by	PJLink	Class	1	and	is	verified	
conformance	with	PJLink	Standard	Class	1.
For	PJ	Link	password,	see	the	owner’s	manual	of	“Network	Set-up	and	Operation.”
PJLink	is	a	registered	trademark	of	JBMIA 	and	pending	trademark	in	some	countries.
Pj Link Notice
Appendix
Projector	Input
RGB
Computer	2	(Analog)
Component
RGB...

7

COMPUTER IN 1 /COMPONENT IN /COMPUTER IN /MONITOR OUT (ANALOG)
Terminal: Analog RGB (Mini D-sub 15 pin)
512341096781514131112
Configurations of Terminals
Red	(R/Cr)	Input/Output	 	
Ground	(Horiz.sync.)
Green	(G/Y)	Input/Output
-----
Blue	(B/Cb)	Input/Output
Ground	(Red)
Ground	(Green)
Ground	(Blue)
1
5

4

6
7
8
+5V	Power/-----
Horiz.	sync.	Input/Output	(Composite	H/V	sync.)
Ground	(Vert.sync.)
DDC	Data/-----
Ground/-----
Vert.	sync.
DDC	Clock/-----

1
10
1
11
14...

80

Write	down	the	PIN	code	number	in	the	column	below	and	keep	it	with	this	manual	securely.	If	you	forgot	or	lost	
the	number	and	unable	to	operate	the	projector,	contact	the	service	station.	
PIN Code Number Memo
Factory	default	set	No:		1	2	3	4*
Factory	default	set	No:		4	3	2	1*
Put	the	label	below	(supplied)	on	in	a	prominent	place	of	the	
projector's	body	while	it	is	locked	with	a	PIN	code.
While	the	projector	is	locked	with	the	PIN	code.
PIN Code Lock No .
Logo PIN Code Lock No .
*Should	 the...