Eiki Projector Lc Wb100 User Manual

Multimedia  Projector
MODEL LC-WB100
 Network Supported 
□		 		Wired	LAN
	 	 	 	100-Base-TX/10-Base-T
Refer	to	the	Owner's	Manuals	below	for	
details	about	network	function.
□			 Network	Set-up	and	Operation
□			PJ	Network	Manager
Owner’s Manual 



Features and Design
This	Multimedia	Projector	is	designed	with	the	most	advanced	technology	for	portability,	durability,	and	ease	of	use.	
This	projector	utilizes	built-in	multimedia	features,	a	palette	of	16.77	million	colors,	and	matrix	liquid	crystal	display	
(LCD)	technology.
♦	Compact Design
	 This	projector	is	designed	compact	in	size	and	weight.	It	is	easy	to	carry	and	installed	anywhere	you	wish	to	
use.
♦ Simple Computer System Setting
	 The	projector	has	the	Multi-scan	system	to	conform...



Table of Contents
Trademarks
Each	name 	of 	corporations 	or 	products 	in 	this 	book 	is 	either 	a 	registered 	trademark 	or 	a 	trademark 	of 	its 	respective	
corporation.
Features and Design   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .
Table of Contents .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .
To the Owner .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .4
Safety Instructions .  .  .  .  .  .  .  .  .  .  .  .  .  ....

4

To the Owner
CAUTION: TO  REDUCE  THE  RISK  OF  ELECTRIC 
SHOCK,  DO  NOT  REMOVE  COVER  (OR 
BACK) .  NO  USER-SERVICEABLE  PARTS 
INSIDE  EXCEPT  LAMP  REPLACEMENT  . 
R E F E R   S E R V I C I N G   T O   Q U A L I F I E D 
SERVICE PERSONNEL .
THIS	SYMBOL 	INDICATES 	THAT 	DANGEROUS	
VOLTAGE	 CONSTITUTING	 A	RISK	 OF	ELECTRIC	
SHOCK	IS	PRESENT 	WITHIN	THIS	UNIT.
THIS	SYMBOL 	INDICATES 	THAT 	THERE 	ARE	
IMPORTANT 	OPERATING 	AND 	MAINTENANCE	
I N S T R U C T I O N S 	I N 	T H E 	O W N E R '...

5

Safety Instructions
All	the	safety	and	operating	instructions	should	be	read	
before	the	product	is	operated.
Read	all	of	the	instructions	given	here	and	retain	them	
for	later	use.	Unplug	this	projector	from	AC	power	supply	
before	cleaning.	Do	not	use	liquid	or	aerosol	cleaners.	
Use	a	damp	cloth	for	cleaning.
F o l l o w 	a l l 	w a r n i n g s 	a n d 	i n s t r u c t i o n s 	m a r k e d 	o n 	t h e	
projector.
For	added	protection	to	the	projector	during	a	lightning	
storm,	or	when	it	is	left...

6

Safety Instructions
Openings	in	the	cabinet	are	provided	for	ventilation.	To	
ensure	reliable	operation	of	the	product	and	to	protect	it	
from	overheating,	these	openings	must	not	be	blocked	
or	covered.	
	CAUTION
Hot	 air	is	exhausted	 from	the	exhaust	 vent.	When	 using	
or 	installing 	the 	projector, 	the 	following 	precautions	
should	be	taken.	
–	Do	 not	put	any	 flammable	 object	or	spray	 can	near	 the	
projector,	hot	air	is	exhausted	from	the	air	vents.
–	Keep	the	exhaust	vent	at	least	3’...

7

Safety InstructionsCompliance
Federal Communications Commission Notice
Note:	This	equipment	has	been	tested	and	found	to	comply	with	the	limits	for	a	Class	B	digital	device,	pursuant	
to	Part	15	of	the	FCC	Rules.	 These	limits	are	designed	to	provide	reasonable	protection	against	harmful	
interference	in	a	residential	installation.	 This	equipment	generates,	uses,	and	can	radiate	radio	frequency	
energy,	and	if	not	installed	and	used	in	accordance	with	the	instructions,	may	cause	harmful	interference...

8

Part Names and Functions
①⑤⑨③②
Front
Back
④
①	Infrared Remote Receiver
②	Zoom Ring
③	Focus Ring
④	Projection Lens
⑤ Lens Cap
	 (See	page	63	for	attaching.)
		
⑥	Speaker
⑦	Exhaust Vents
  CAUTION
Hot	air	is	exhausted	from	the	exhaust	vent.	Do	not	put	
heat-sensitive	objects	near	this	side.
⑧	Lamp Cover
⑨	Air Intake Vent
⑩	Terminals and Connectors
⑪	Top Controls and Indicators
⑫ LAN Connection Terminal
⑬ Power Cord Connector
⑭	Filters
⑮	Adjustable Feet
Note:
⑫ 	LAN	Connection	
Terminal	is	for	the...



Part Names and Functions
Rear Terminal 
⑥	S-VIDEO IN
	 Connect	the	S-VIDEO	output	signal	from	video	 equipment	to	this	jack	(p.15).
⑨	AUDIO IN
	 Connect	the	audio	output	signal	from	video	 equipment	connected	to	
⑥	or	⑩	to	this	jack.	
For	a	mono	audio	signal	(a	single	audio	jack),	
connect	it	to	the	L 	(MONO)	jack	(p.15).
⑧	COMPUTER 1 / COMPUTER  AUDIO IN
	 Connect	the	audio	output	(stereo)	from	a	 computer	or	video	equipment	connected	to	
②	
or	
③ 	to	this	jack.	(pp14,	16)
⑩	VIDEO IN...

10

Part Names and Functions
Top Control
⑨	LAMP REPLACE indicator
	 Lights	yellow	when	the	projection	lamp	reaches	its	 end	of	life	(pp.64,	72).
⑧	WARNING indicator
	 –	Lights	red	when	the	projector	detects	an	abnormal	 condition.	
	 –	Blinks	red	when	the	internal	temperature	of	the	 projector	exceeds	the	operating	range	(pp.61,	72).
④	ON/STAND-By  button
Turn	the	projector	on	or	off	(pp.18-20).
⑤	POWER indicator
	 –	Lights	red	when	the	projector	is	in	stand-by	mode.
	 –	Lights	green	during	operations....