Eiki Projector Lc Wb100 User Manual

1

PC adjust Menu
Manual PC adjustment
Some	computers	employ	special	signal	formats	which	may	not	be	tuned	by	Multi-scan	system	of	this	projector.		
Manual	PC	adjustment	enables	you	to	precisely	adjust	several	parameters	to	match	those	signal	formats.	The	
projector	has	five	independent	memory	areas	to	store	those	parameters	manually	adjusted.	It	allows	you	to	
recall	the	setting	for	a	specific	computer.	
1

Use	the	Point	◄►	buttons	to	adjust	the	value,	eliminating	a	
flicker	from	the	image...



Store
To	store	the	adjusted	data,	select Store and	then	 press	the	
Point	
►	or	the	SELECT 	button.	Move	the	highlight	to	one	of	
the	Modes	1	to	5	in	which	you	want	to	store,	and	then	press	
the	SELECT 	button.
Mode free
To	clear	the	stored	data,	select	Mode free	and	then	press	
the	Point	
►	or	the	SELECT 	button.	Move	the	highlight	to	the	
Mode	that	you	want	to	clear	and	then	press	the	SELECT 	
button.
Note:
	 •	Display area (H/V) cannot	be	selected	when	480i,	575i,	
480p ,	575p,	70p...



Image select Menu
IMAGE button
Dynamic
Real
Image 1
Image 
Image 
Image Mode Selection 
Image 4
Blackboard(Green)
Standard
Remote Control
IMAGE button
Select	the	desired	image	mode	 among	Dynamic,	Standard ,	
Real,	Blackboard (Green) ,	Colorboard,	Image 1,	Image  ,	
Image  ,	and	
Image 4	by	pressing	the	IMAGE	button	on	the	
remote	control.
Standard
Picture	mode	with	improved	halftone	for	graphics.
Real
Blackboard (Green)
Image 1–4
For	the	image	projected	on	a	blackboard....

4

Image adjust Menu
Image Adjustment
Reset
Press	the	MENU	button	to	display	the	On-Screen	
Menu.	Use	the	Point	
▲▼	buttons	to	select	Image 
adjust	and	then	press	the	Point	►	or	the	SELECT 		
button.
1
Use	the	Point	▲▼	buttons	select	the	desired	item	
and	then	press	the	SELECT 	button	to	display	the	
adjustment	dialog	box.	Use	the	Point	
◄►	buttons	to	
adjust	the	setting	value.
Note:
•	When	White	balance
 Red ,	Green 	or	Blue	is		
		adjusted,	 Color temp . 	will	change	to	
User.
•	When...

5

Store
Screen Menu
To	store	the	adjusted	data,	select	Store	and	press	the	Point	
►	or	the	SELECT 	button.	Use	the	Point	▲▼	buttons	to	
select	one	from	
Image 1 	to	4	and	press	the	SELECT 	button.	
A 	confirmation	box	appears	and	then	select	 yes .	Stored	
data	can	be	called	up	by	selecting	an	
Image (1–4) 	in	the	
Image	Mode	Selection	on	page	33.
A 	confirmation	box	appears	and	
then	select	 yes .
Computer Input
This	projector	has	the	picture	screen	resize	function,	which	
enables	you	to...

6

Remote Control 
D .ZOOM + button
POINT buttons
SELECT button
D .ZOOM - button
 0 0Off 0 0
Computer Input
Select	Digital zoom +.	The	On-Screen	Menu	disappears	
and	 D . zoom + 	appears.	Press	the	SELECT 	button	to	
expand	the	 image	size.	Use	the	Point	
▲▼◄►	buttons	 to	pan	
the	image.	 The	Panning	function	can	work	only	when	the	
image	is	larger	than	the	screen	size.
A 	projected	image	can	be	also	expanded	by	pressing	the	
D.ZOOM	
+	button	on	the	remote	control.	
To	exit	the	Digital	zoom	+/–...

7

Choose	Video	or	S-video 	by	pressing	the	INPUT 	button	on	
the	top	control	or	the	VIDEO	button	or	the	S-video	button	on	
the	remote	control.
Before	 using	INPUT 	button,	 correct	input	source	 should	be	
selected	through	menu	operation	as	described	below.
1

Input Menu
Input Source Selection (Video, S-video)
Video Input
Direct Operation
Menu Operation
When 	video 	input 	signal 	is 	connected 	to 	the	
VIDEO	jack,	select	Video.Video
When	 video	input	signal	 is	connected	 to	the	 S-
VIDEO...

8

1
Input Menu

When	the	input	source	is	coming	from	video	
equipment	connected	to	the	COMPUTER	
IN	1/COMPONENT	IN	terminal	with	a	
Component-VGA 	Cable,	select	
Component.	
Component
When	the	input	source	is	coming	from	video	
equipment	connected	to	the	COMPUTER	
IN	1/COMPONENT 	IN	terminal	with	a	Scart-
VGA 	Cable,	select	
RGB (Scart) .	
RGB (Scart)
Direct Operation
Menu Operation
Note:	
	 	 When	the	Input	Search	function	is	set	to	
On1 	or	On ,	
the	input	signal	will	be	searched...



Video System Selection
1AV System Menu (Video or S-video)
AV System Menu (Component)

If	the	projector	cannot	reproduce	proper	video	image,	
select	a	specific	broadcast	signal	format	from	among	
PAL,	
SECAM ,	NTSC,	NTSC 4 .4 ,	PAL-M	and	PAL-N.
PAL/SECAM/NTSC/NTSC4 .4/PAL-M/PAL-N
The	projector	automatically	detects	an	incoming	video	
signal,	and	adjusts	itself	to	optimize	its	performance.
If	the	projector	cannot	reproduce	proper	video	image,	select	
a	specific	component	video...

40

Image select Menu
Select	the	desired	image	mode	from	among	Dynamic,	
Standard ,	Cinema,	Blackboard (Green) ,	Colorboard,	
Image 1,	Image  ,	Image  	and	Image 4	by	pressing	the	
IMAGE	button	on	the	remote	control.
Standard
Picture	mode	adjusted	with	fine	tone.
Cinema
Blackboard (Green)
Image 1–4
IMAGE button
Dynamic
Cinema
Image Mode Selection 
For	the	image	projected	on	a	blackboard.
This	mode	help	enhance	the	image	projected	on	a	
blackboard.	 This	is	mainly	effective	on	a	green	colored...