Eiki Projector Lc Wb100 User Manual

							
1

How to Operate the On-Screen Menu
The	projector	can	be	adjusted	or	set	via	the	On-Screen	
Menu.	The	menus	have	a	hierarchical	structure,	with	
a	main	menu	that	is	divided	into	submenus,	which	are	
further	divided	into	other	submenus.	For	each	adjustment	
and	setting	procedure,	refer	to	respective	sections	in	this	
manual.
Use	the	Point	
▲▼	buttons	to	highlight	or	select	a	main	
menu	item.	Press	the	Point	
►	or	the  SELECT 	button	
to	access	the	submenu	items.	(The	selected	item	is	
highlighted	in	orange.)
Use	the	Point	
▲▼	buttons	to	select	the	desired	
submenu	item	and	press	the	SELECT 	button	to	set	or	
access	the	selected	item. Press	the	MENU	button	on	the	top	control	or	the	
remote	control	to	display	the	On-Screen	Menu.
1


On-Screen Menu
Top Control
MENU button
POINT buttons
(arrowhead)
Remote Control
SELECT button
MENU button
SELECT button
POINT buttons
(arrowhead)
Point
► or SELECT button
Use	the	Point	▲▼◄►	buttons	to	adjust	the	setting	or	
switch	between	each	option	and	press	the	SELECT 	
button	to	activate	it	and	return	to	the	submenu.4
Press	the	Point	◄	button	to	return	to	the	main	menu.	
Press	the	MENU	button	to	exit	the	On-Screen	Menu.5
The	currently	set	item	is	
check	marked.
The	selected	item	is
highlighted	in	orange.
Basic Operation 
						

							


Menu Bar
For	detailed	functions	of	each	menu,	see	“Menu	Tree”	on	pages	70-71.
Main	MenuSub-Menu
	Image select
	For	computer	source,	used	to	select	an	image	mode	from	among	Dynamic,	Standard ,	Real,	Blackboard(Green) ,	
Colorboard	and	image	1 - 4	(p.33).	
						For	Video	source,	used	to	select	an	image	mode	among	
Dynamic ,	Standard ,	Cinema,	Blackboard(Green) ,	Colorboard	
and	
Image 1- 4 	(p.40).
	Image adjust
	 For	computer	source,	used	to	adjust	computer	image	[
Contrast ,	Brightness ,	Color temp . ,	White balance (R/G/B) ,	
Sharpness	and	Gamma]	(pp.34-35).
						For	Video	source,	used	to	adjust	picture	image	[
Contrast ,	Brightness ,	Color,	Tint,	Color temp . ,	White balance (R/G/
B),	Sharpness ,	Gamma,	Noise reduction  and	Progressive]	(pp.41-42).
	PC adjust
	Select	Fine sync . ,	Total dots,	Horizontal ,	Vertical,	Clamp,	Display area H ,	Display area V	and	Auto PC adj . 	to	adjust	
the	parameters	to	match	with	the	PC	input	signal	format	(pp.30-32).
	Screen
	For	computer	source,	used	to	adjust	size	of	the	image	[Normal ,	True,	Full,	Custom 	and	Digital zoom +/– 	]	(pp.35-36).	For	
Video	source,	used	to	set	size	of	image	[
Normal ,	Full,	Zoom ,	Wide,	Natural wide 	and	Custom]	(p.43).
	Input
	 Used	to	select	an	input	source	from	
Computer 1 ,	Computer  ,	HDMI,	Video 	or	S-video 	(pp.27-28,37-38).
	Sound
	Used	to	adjust	the	volume	or	mute	the	sound	(p.24).
	Information
	Display	the	input	source	information:	Input,	H-sync freq . ,	V-sync freq . ,	Screen,	Language ,	Lamp status ,	Lamp 
counter,	Power management ,	Keylock,	PIN code lock 	and	Remote control 	(p.60).
	Guide
	The	key	operation	is	displayed.
	Setting
						Used	to	set	the	projector’s	operating	configurations	(pp.44-59).
	Network
	See	owner’s	manual	of	“Network	Set-up	and	Operation”.
Basic Operation









 
						

							


Rotate	the	Zoom	Ring	to	zoom	in	and	out.		
Rotate	the	Focus	Ring	to	adjust	the	focus	of	the	image.		
Zoom and Focus Adjustment
If	a	projected	picture	still	has	keystone	distortion	after	
pressing	the	AUTO	SETUP 	button	on	the	top	control	or	the	
AUTO	SET 	button	on	the	remote	control,	correct	the	image	
manually	as	follows:
Press	the	KEYSTONE	button	on	the	remote	control.	 The	
Keystone	dialog	box	appears.	Use	the	Point	
▲▼	buttons	to	
correct	keystone	distortion.	 The	keystone	adjustment	can	be	
stored	(see	page	46).
Reduce	the	upper	width	
with	the	Point	
▲	button.	 Reduce	the	lower	width	
with	the	Point	▼	button.		
•	The	white	arrows	indicate	that	there	is	no	
correction.
•	A 	red	arrow	indicates	the	direction	of	correction.
•	An	arrow	disappears	at	the	maximum	correction.
•	If	you	press	the	KEYSTONE	button	on	the	 remote	control	once	more	while	the	keystone	
dialog	box	is	being	displayed,	the	keystone	
adjustment	will	be	canceled.
•	The	adjustable	range	is	limited	depending	on	 the	input	signal.	
Keystone Correction
Remote Control
Auto	setup	function	is	provided	to	automatically	execute	the	
setting	of	 Auto	setup	(includes	Input	search,	 Auto	PC	adj.	
and	 Auto	Keystone	functions)	in	the	setting	menu	by	just	
pressing	the	 AUTO	SETUP 	button	on	the	top	control	or	the	
AUTO	SET 	button	on	the	remote	control.	Refer	to	page	45	
for	the	setting	of	the	 Auto	setup	function.
Notes:
	 •	Auto	Keystone	corrects	vertical	distortion	only;	it	does	 not	correct	horizontal	distortion.
	 •	Auto	Keystone	cannot	work	when	Ceiling	feature	is	set	 to	
On 	in	the	Setting	menu	(p.50).
	 •	Perfect	correction	of	the	image	distortion	cannot	be	 ensured	with	the	 Auto	setup	function.	If	the	distortion	
cannot	be	corrected	properly	by	pressing	the	 AUTO	
SETUP 	or	AUTO	SET 	button,	adjust	manually	by	
pressing	the	KEYSTONE	button	on	the	remote	control	
or	selecting	Keystone	in	the	Setting	menu	(p.46).
	 •	Fine sync . ,	Total dots ,	Horizontal 	and	Vertical	
position	of	some	computers	cannot	be	fully	adjusted	
with	the	 Auto	PC	adjustment	function.	When	the	image	
is	not	provided	properly	with	this	operation,	manual	
adjustments	are	required	(pp.31-32).
AUTO SET button
Auto Setup Function
POINT ▲▼	buttons
KEySTONE button
Zoom	Ring
Focus	Ring	
Top Control
AUTO SETUP button
POINT ▲▼buttons
Basic Operation 
						

							
4

Sound Adjustment
1

Press	the	MENU	 button	to	display	 the	On-Screen	 Menu.	
Use 	the 	Point 	
▲▼	buttons 	to 	select 	Sound .	 Press 	the	
Point	
►	 or	 the	 SELECT 	button	 to	access	 the	submenu	
items.	
Press	the	VOLUME+/–	buttons	on	the	top	control	or	on	the	
remote	control	to	adjust	the	volume.	 The	volume	dialog	box	
appears	on	the	screen	for	a	few	seconds.
Press	the	MUTE	button	on	the	remote	control	to	select	On	
to	temporarily	turn	off	the	sound.	 To	turn	the	sound	back	
on,	press	the	MUTE	button	again	to	select	
Off 	or	press	the	
VOLUME	+/–	buttons.	 The	Mute	function	is	also	effective	for	
the	 AUDIO	OUT 	jack.
Press	the	SELECT 	button	to	switch	the	mute	function	On/
Off.	When	the	sound	is	turned	off,	On	is	displayed.	Press	
the	VOLUME	+/–	buttons	again	to	turn	the	sound	back	on.
Use	the	Point	▲▼	buttons	to	select	the	desired	submenu	
item	and	press	the	SELECT 	button	to	access	the	
selected	item.
Volume
Volume
Mute
Press	the	Point	▲ button 	to	turn	up	the	volume;	press	the	
Point	
▼ button 	to	turn	down	the	volume.
Mute 
Direct Operation
Menu Operation
Sound Menu
Volume Dialog Box
Remote Control
Top Control
V O L U M E + / - 
buttons
Approximate	level	
of	the	volume.
Press	the	MUTE	button	to	set	the	
Mute	function	
On 	or	Off .	The	dialog	
box	disappears	after	4	seconds.
Basic Operation
VOLUME+ button
VOLUME- button
MUTE button 
						

							
5

Remote Control Operation
Using	the	remote	control	for	some	frequently	used	operations	is	advisable.	Just	pressing	one	of	the	buttons	
enables	you	to	make	the	desired	operation	quickly	without	calling	up	the	On-Screen	Menu.
Press	the	COMPUTER	1/2,	HDMI,	VIDEO,	S-VIDEO	and	
COMPONENT	buttons	on	the	remote	control	to	select	the	
input	source.	See	pages	27-28,37-38	for	details.
COMPUTER 1/, HDMI, VIDEO, S-VIDEO and 
COMPONENT  buttons
Press	the	FREEZE	button	on	the	remote	control	to	freeze	
the	picture	on	the	screen.	 To	cancel	the	Freeze	function,	
press	the	FREEZE	button	again	or	press	any	other	button.
FREEZE button
Display	the	input	source	information:	Input 	,	H-sync freq . ,	
V-sync freq . ,	
Screen,	Language ,	Lamp status ,	Lamp 
counter,	Power management ,	Keylock,	PIN code lock 
and	
Remote control 	(p.60).
INFO . button
Press	the	D.ZOOM	buttons	on	the	remote	control	to	enter	to	
the	Digital	zoom	+/–	mode.	See	page	36	for	details.
D .ZOOM buttons
Remote Control
FREEZE 
button  
D .ZOOM buttons
LAMP  button
Note:
			 See	the	next	page	for	the	description	of	other	
buttons.LAMP button
COMPUTER 1/buttons
VIDEO 
button
Normal	....... 	Normal	brightness	
Eco	............ 	Lower	brightness	reduces	the	lamp	power	
consumption	and	extends	the	lamp	life.
Press	the	LAMP 	button	on	the	remote	control	to	select	the	
lamp	mode	for	changing	the	brightness	on	the	screen.
INFO . button
POINT▲▼	
buttons
S-VIDEO  button
COMPONENTbutton
Basic Operation
HDMI button
PIP button
Press	the	PIP 	button	on	the	remote	control	to	enter	P in P 
or	
P by P.
Mode 	of	Picture	in	Picture	and	input	source	will	be	
displayed	on	the	main	picture	and	input	soucre	will	be	
displayed	on	the	sub	picture	for	10	seconds.
See	page	51	for	details.
PIP button 
						

							
6

black	out	→		normal	→	black	out	→		normal	→•	•	•	•	•
Press	the	NO	SHOW	button	on	the	remote	control	to	black	out	
the	image.	 To	restore	to	normal,	press	the	NO	SHOW	button	
again	or	press	any	other	button.	 The	screen	changes	each	time	
you	press	the	NO	SHOW	button	as	follows.
NO SHOW button
Press	the	P-TIMER	button	on	the	remote	control.	 The	P-Timer	
display	
00:00 	appears	on	the	screen	and	the	countdown	starts	
(00:00–59:59).
To	stop	the	countdown,	press	the	P-TIMER	button.	 To	cancel	
the	P-Timer	function,	press	the	P-TIMER	button	again.
P-TIMER button
Press	the	IMAGE	button	on	the	remote	control	to	select	a	
desired	image	mode	of	the	screen.	See	pages	33,	40	for	
details.
IMAGE button
No show 	disappears	after	4	seconds.
P-Timer	display
Note:
			See	the	previous	page	for	the	description	of	
other	buttons.
IMAGE button
NO SHOW button 
P-TIMER button
SCREEN button
Select	the	screen	size	(See	pages	35-36,	43	for	details).
SCREEN button
Basic Operation 
						

							
7

Choose	Computer 1(RGB)	by	pressing	the	INPUT 	button	on	the	top	control	or	press	the	COMPUTER	1	button	
on	the	remote	control.	
Before	using	INPUT 	button,	correct	input	source	should	be	selected	through	Menu	operation	as	described	
below.
1
Input Menu


Input Source Selection (Computer 1: RGB )
Computer Input 
Note:
	 	 When	the	Input	Search	function	is	set	to	On1	or	On 	in	
the	 Auto	setup	function,	the	input	signal	will	be	searched	
automatically	(p.45).
Computer 1
Top Control
Direct Operation
Menu Operation
Press	the	MENU	button	to	display	the	On-Screen	
Menu.	Use	the	Point	
▲▼	buttons	to	select	Input 	and	
then	press	the	Point	
►	or	the	SELECT 	button.	
Use	the	Point	
▲▼	buttons	to	select	Computer 1 .	
When	Computer 1	is	selected,	 press	the	Point	►	
button	to	access	the	submenu	items .	Use	the	Point	▲
▼	buttons	to	select	the	RGB	input	source	and	then	
press	the	SELECT 	button.
COMPUTER 1 button
Remote Control
Computer 1(RGB)
Computer 1(Scart)
INPUT button
Computer 1
HDMI
Computer  
S-video
Video
COMPUTER 	can	not	be	selected	when	using	the	COMPUTER	IN	2/
		MONITOR	OUT 	terminal	as	MONITOR	OUT 	output. 
						

							
8

Choose	Computer  (RGB)	by	 pressing	 the	INPUT 	button	 on	the	 top	control	 or	press	 the	COMPUTER	 2	button	
on	the	remote	control.
Input Source Selection (Computer : RGB)
Direct Operation
Menu Operation
Note:
	 	 When	 the	Input	 Search	 function	 is	set	 to	On1 	or	 On ,	
the	input	signal	will	be	searched	automatically	(p.45).
COMPUTER  button
Top ControlRemote Control
1

Press	the	MENU	button	to	display	the	On-Screen	
Menu.	Use	the	Point	
▲▼	buttons	to	select	Input 	and	
then	press	the	Point	
►	or	the	SELECT 	button.	
Use	the	Point	
▲▼	buttons	to	select	 Computer 	and	
then	press	the	SELECT 	button.
Input Menu
Computer (RGB)
When	Computer   is	selected,	analog	RGB	input	
source	will	be	selected	directly.
INPUT button
Computer Input
COMPUTER  	can	not	be	selected	when	using	the	COMPUTER	IN	2/
MONITOR	OUT 	terminal	as	MONITOR	OUT 	output.
Computer 1
HDMI
Computer  
S-video
Video 
						

							


PC System Menu
PC System Menu
Computer System Selection
This	projector	automatically	tunes	to	various	types	of	computers	based	on	VGA,	SVGA,	XGA,	SXGA,	WXGA,
UXGA	or	WUXGA 	with	its	Multi-scan	system	and	 Auto	PC	adjustment.	If	a	computer	is	selected	as	a	signal	
source,	this	projector	automatically	detects	the	signal	format	and	tunes	to	project	a	proper	image	without	any	
additional	settings.	(Signal	formats	provided	in	this	projector	are	shown	on	pages	73-74.)
One	of	the	following	messages	may	appear	when:
The	projector	cannot	recognize	the	connected	
signal	conforming	to	the	provided	PC	Systems.	
Auto 	is	displayed	on	the	System	Menu	box	
and	the	 Auto	PC	adjustment	function	works	
to	display	proper	images.	If	the	image	is	not	
projected	properly,	a	manual	adjustment	is	
required	(pp.31-32).
There	is	no	signal	input	from	the	computer.	
Check	the	connection	between	your	computer	
and	the	projector.	(See	“Troubleshooting”	on	
page	67.)
Auto
-----
The	preset	system	is	manually	adjusted	in	the	
PC	adjust	Menu.	 The	adjusted	data	can	be	
stored	in	
Mode 1–5 	(pp.31-32).
Mode 1
PC	Systems	provided	in	this	projector	is	chosen.		
The	projector	chooses	a	proper	system	provided	
in	the	projector	and	displays	it.		SVGA 1
*Mode	1	and	SVGA 	1	are	examples.		
1

PC	system	can	also	be	selected	manually.
Selecting Computer System Manually
Press	the	MENU	button	to	display	the	On-Screen	
Menu.	Use	the	Point	
▲▼	buttons	to	select	Input	and	
then	press	the	Point	
►	or	the	SELECT 	button.
Use	the	Point	
▲▼	buttons	to	select	System 	and	then	
press	the	Point	
►	or	the	SELECT 	button.
Use	the	Point	▲▼	buttons	to	select	the	desired	system	
and	then	press	the	SELECT 	button.
The	PC	System	Menu	
Selected	system	is	
displayed.
Systems	in	this	
dialog	box	
can	be	selected.Customized	
Mode 
(1–5)
	set	in	the	
PC	adjust	Menu	
(pp.31-32).
Computer Input 
						

							
0

Auto	PC	adjustment	function	is	provided	to	automatically	adjust	Fine sync,	Total dots ,	Horizontal 	and	Vertical	
positions	to	conform	to	your	computer.
PC adjust Menu
Auto PC adjustment
To store adjustment parameters
The	 adjusted	 parameters	 from	the	Auto	 PC	adjustment	 can	
be	 stored	 in	the	 projector.	 Once	the	parameters	 are	stored,	
the	 setting	 can	be	done	 just	by	selecting 	a	
Mode  (1–5) 	in	
the 	PC 	System 	Menu 	(see 	page 	29). 	See 	also 	“Store” 	on	
page	32.
Note:
	 •	 Fine sync . ,	Total dots,	Horizontal 	and	Vertical	
position	of	some	computers	cannot	be	fully	adjusted	
with	the	 Auto	PC	adjustment	function.	When	the	image	
is	not	provided	properly	with	this	operation,	manual	
adjustments	are	required	(pp.31-32).
	 •	The	 Auto	PC	adjustment	cannot	be	operated	when	
480i,	
575i,	480p ,	575p,	70p,105i ,	or	1080i	is	selected	in	
the	PC	System	Menu	(p.29).	
Press	the	MENU	button	to	display	the	On-Screen	
Menu.	Use	the	Point	
	▲▼	buttons	to	select	PC adjust	
and	then	press	the	Point	
► 	button.
1
Use	the	Point	▲▼	buttons	to	select	 Auto PC adj .	and	
then	press	the	SELECT 	button.
Auto PC adj .
Menu Operation
Use	Point	▲▼	buttons	to	select	 Auto PC 
adj .  and	press	the	SELECT 	button.
Please wait . . . 	appears	while	the	 Auto	PC	
adjustment	is	in	process.
Computer Input