Eiki Projector Lc Hdt700 User Manual

41
ENGLISH
 
Setting up the projector
Item  Description
Screen aspect  .... 
Sets the aspect. {Default(16:9), 16:10, 4:3}  
Keystone ................ 
Corrects the keystone distortion of the 
projected image on the screen by press-
ing the Up/Down/Left/Right buttons.  
Click Reset to reset the keystone correc-
tion.
Digital zoom  .......  Adjusts the image zoom in and out at 
computer input mode. 
Click OFF to return the image to its nor -
mal size.
Reset .........................   Resets the settings...

42
Chapter 4 Controlling the Projector
Item  Description
Filter control  ....... 
Scroll the filter. Click "Roll-up", a confir -
mation display appears, and then click 
"OK", the filter will be scrolled. 
Fan speed control  ...   Sets the running speed for the cooling 
fans. (Normal, Max) 
Remote control....   Selects the remote control code. 
(Code1 - Code8) 
Power management ...   Sets into the selected power manage -
ment mode (OFF, Ready 1, Ready 2, 
Shut down) if the input signal is...

43
ENGLISH
 
Setting up the projector
Item  Description
Closed caption . .  
Sets the closed caption function. 
 
Closed caption  ...  
Sets the closed caption mode. (OFF, 
CC1, CC2, CC3, CC4)
  Color  .....................   Sets the color of the contents. (Color, 
White) 
Lamp Corres. Value(h) ...   Displays the lamp use time 
(Corresponding value). Reset the time 
after lamp replacement. Click "Reset", 
a confirmation display appears, and 
then click "OK", the time will be reset....

44
Chapter 4 Controlling the Projector
Information
This  page  is  to  display  the  basic  information  of  the  projector  status.  Click 
Information on the main menu.
Click this button to 
update the information.
Items  Description
Input  ............................................  
Displays selected input and source.
System  ....................................... Displays selected signal system.
Signal  .......................................... Input signal status (Yes, No)
Screen...

45
ENGLISH
 
Information
Indication of the lamp status
Icon display/backgroundStatus
 White/BlueLamp on (Normal)
White/RedLamp on (Lamp is being used over a specified use time, replace lamp 
immediately)
Gray/BlueLamp off (Normal)
Gray/RedLamp off (Lamp is being used over a specified use time, replace lamp 
immediately)
Red/Blue with XLamp failure (Lamp failure, check lamp condition)
Red/Red with XLamp failure (Lamp failure and lamp is being used over a specified use 
time, replace lamp immediately)
Icon...

46
Chapter 4 Controlling the Projector 

ENGLISH
47
ENGLISH
Chapter 5 
 Appendix 5
Connection examples
Use of telnet
Web browser setting Q & A 

48
Chapter 5 Appendix
Examples of connection
Peer-To-Peer connection
Connecting the projector (PJ01) to the control computer (PC05) directly.
Projec tor Name: P J01
IP Addr ess  : 192.168.0.2
Subnet Mask  : 255.255.255.0
Default Gateway  : 0.0.0.0
DNS  : 0.0.0.0
Computer Name: PC10
IP Addr ess  : 192.168.0.10
Subnet Mask  : 255.255.255.0
Default Gateway  : 
DNS  : 
C
omputer Name: PC05
IP Addr ess  : 192.168.0.5
Subnet Mask  : 255.255.255.0
Default Gateway  : 
DNS  : 
Hub
Projec tor Name: P J01 
IP Addr...

49
ENGLISH
 
The gateway (Router) installed in the network
Connecting the projector (PJ01) to the control computer (PC05) via the gateway.
To another netw ork
Ne
twork Gr oup: 192.168.200.x 
Ne twork Gr oup: 192.168.10.x 
Projec tor Name: P J01 IP Address  : 192.168.200.15 
Subnet Mask  : 255.255.255.0 
Default Gateway  : 192.168.200.1 
DNS  : 192.168.201.1  C
omputer Name  : PC205 
IP Addr ess  : 192.168.200.5 
Subnet Mask  : 255.255.255.0 
Default Gateway  : 192.168.200.1 
DNS  : 192.168.201.1 
IP...

50
Chapter 5 Appendix
Use of telnet
You can control the projector by using the telnet application*1 installed on your computer.  
Normally, the telnet application is available on your computer.
* The telnet 10000 port is used to control the projector.
Control
(For example, in case of using the telnet 
application of Windows XP Professional .)
1.   Select  Run... submenu from  Start menu 
on  the  computer.  Type  "telnet"  onto  the 
Open  text area on the displayed window 
and press OK  button....