Eiki Projector Lc Hdt700 User Manual

ENGLISH
11
ENGLISH
Chapter 2 
 Setup Procedures2
Describes how to configure the network. 

12
Chapter 2 Setup Procedures
Setting Procedure
Setting procedures and contents differ depending on the LAN installation location.  
When installing, consult your system administrator to set up the LAN appropriately.
Connect the LAN cable to the LAN connection terminal of the projector.
Network configuration
Set the Wired LAN network through the projector menu. Detailed network settings will be 
made  with  browser.  Refer  to  “3.  Basic  setting  and  operation”  (p.17-31).  First,  complete  the...

13
ENGLISH
 
*1 Set "On" only when the DHCP server is available on your network environment.
*2 Set [255.255.255.255] if the network does not provide the gateway (router).
*3 Set [255.255.255.255] if you do not use the function E-mail alert.
3.  Select  "Network  setting"  in  the  Network  menu  and  press SELECT  button,  and  then  the 
LAN setting screen will appear and selected LAN settings will be displayed. Adjust each 
item  to  the  setting  environment.  Consult  your  system...

14
Chapter 2 Setup Procedures
The Network PIN code is to restrict the access to the projector through the network.
After  setting  the  Network  PIN  code,  you  need  to  enter  it  to  operate  the  projector  via  the 
networks.
Network PIN code
Network information
1. Select "Network PIN code" in the Network menu, and press SELECT button. 
  The Network PIN code screen will appear.
2. Set the Network PIN code.
Set the figures with the Point  ed buttons and move to the next items with the Point...

15
ENGLISH
 
AMX D. D.
Network factory default
Choose  “AMX  D.  D.”  in  the  Network  menu  and  press SELECT button, select ON or OFF to 
allow the projector to be detected by AMX Device Discovery.
For more details, visit http://www.amx.com/.
1. Select “Network factory default” in the Network menu and press SELECT  button.
2. A confirmation box appears and select "Yes" and then press SELECT  button.
3. Another confirmation box appears and select "Yes" and then press SELECT  button.
4....

16
Chapter 2 Setup Procedures
Wired LAN factory default settings
ParameterSettings
DHCP Off
IP ADDRESS 169.254.100.100
SUBNET MASK 255.255.0.0
GATEWAY ADDRESS 255.255.255.255
DNS ADDRESS 255.255.255.255 

ENGLISH
17
ENGLISH
Chapter 3 
 Basic Setting and Operation3
Describes  basic  operations  and  settings  for  controlling  the  projec -
tor  by  using  the  web  browser.  It  is  required  that  computer  and 
projector  is  connected  to  the  network  and  the  network  address  is 
properly configured. 

18
Chapter 3 Basic Setting and Operation
[2] Login
 
If  the  setting  page  has  set  the  password,  the  authentication  window  will  appear.  In  this 
case  type  "user"  onto  the User  Name  text  area  and  the  login  Network  PIN  code  onto 
the Password  text area and then click OK (Log in) button.
*  The entering User Name must be "user" and it can not be changed.
[Note]
  When accessing the projector for the first time or the Network 
PIN code "0000" is set, the...

19
ENGLISH
 
[3] Display of main setting page
The  following  main  setting  page  will  be  displayed  according  to  your  display  mode 
selection. Perform various kinds of settings through this page. Click on the menus to dis-
play the control and setting pages.
Main setting page in the display
Setting page
Displays the control and 
setting items according to 
the selected menu.Main menu
For selection of  control and 
setting items of the projector. 
Sub menu tab
Switches the sub 
menu tab.
Login the...

20
Chapter 3 Basic Setting and Operation
How to use the setting page
To control and set up the projector, use the setting menus on the web browser. Describes the 
basic operation and procedures commonly used on this manual.
The  setting  menu  appears  when 
clicking the sub menu tab. 
*  Each item has a valid setting range 
respectively.
Example of the setting page
✐		The value in the text box indicates current value.
✐    Each item has a valid setting range. The setting value exceeding this becomes...