Eiki Projector Lc Hdt700 User Manual

Wired Setting
Projector Set-up and Operation
Owner’s Manual
Network Set-up and Operation 
This is the manual for the Network function.  
Read this manual thoroughly to operate the Network function.
First,  read  the  owner's  manual  of  the  projector  to  understand  the  basic 
operation of the projector and the safety instructions.
The safety instructions in the owner's manuals should be followed strictly.
 for HDT700 

2
ComplianceFederal Communications Commission Notice
This  equipment  has  been  tested  and  found  to  comply  with  the  limits  for 
a  Class  A  digital  device,  pursuant  to  Par t  15  of  FCC  Rules.  These  limits  are 
designed  to  provide  reasonable  protection  against  harmful  interference  when 
the  equipment  is  operated  in  a  commercial  environment.  This  equipment 
generates,  uses,  and  can  radiate  radio  frequency  energy  and,  if  not  installed 
and used in accordance...

3
ENGLISH
 
Safety instructions
 CAUTION IN USING THE PROJECTOR VIA NETWORKS
● When  you  find  a  problem  with  the  projector,  remove  the  power  cable 
immediately  and  inspect  the  unit.  Using  the  projector  with  failure  may  cause 
fire or other accidents. 
● If you remotely use the projector via networks, carry out a safety check regularly  and take particular care to its environment. Incorrect installation may cause fire 
or other accidents.
 CAUTION IN USING NETWORK  FUNCTION
● We...

4
Compliance ........................................................................\
............................................................................................................ 2
Safety instructions  ........................................................................\
............................................................................................. 3
Table of contents  ........................................................................\...

ENGLISH
5
ENGLISH
1Chapter 1 
 Preparation
Describes features and operating environment of this projector. 

6
Chapter 1 Preparation
Features
E-Mail Alert function (+p.26)
The  projec tor  sends  mes-
sages  to  the  registered  e -mail 
addresses  when  a  lamp  abnor -
malit y  or  power  failure  occurs 
with  the  projec tor.  This  mes -
sage describes how to solve the 
cause  of  the  problems.  You  can 
take  ef ficient  ac tion  for  quick 
recovery.
PC4
PC3PC6PC5
PC1PC2
Y o u’ve  got 
Mail. 
PJ2PJ1
Web Management function (+p.33)
With  this  func tion,  you  can 
m o n i to r  p r o j e c to r  f u n...

7
ENGLISH
 
Features
Operating SystemWindows 2000, Windows XP (32bit version),  
Windows Vista (32bit version), Windows 7 (32bit version)
Mac OS X v 10.4 or 10.5
Computer environment
Recommended CPUWindows: Pentium III 900MHz or more
Macintosh :  800 MHz PowerPC G4 or faster,or 1.8 GHz Intel Core 
Processor or faster
Memory
  Windows :   64MB (Minimum)/ 128MB or more (Recommended) 
128MB or more for Windows XP 
1GB or more for Windows Vista or Windows 7
Macintosh : 256MB or more (512MB is recommended)...

8
Chapter 1 Preparation
Notice
Expression/Abbreviation
The  OS  of  the  computer  and  the  Web  browser  described  in  this  manual  are  Windows  XP 
Professional and Internet Explorer 6.0. In case of another OS or Web browser, some instruc-
tion  procedures  may  differ  from  the  actual  operation  depending  on  your  computer  envi -
ronment.
Use of this manual
This  manual  does  not  provide  the  detailed  description  of  basic  operation  and  functions 
for  computer,  web  browser,...

9
ENGLISH
 
Flow of installation
Flow of installation
To use the projector via the networks, follow the setup procedures below.
STEP 1Connect the LAN and set the configuration.
STEP 2Network Configuration has completed.
Decide depending on the LAN environment.
	➔ “2. Setup Procedures” (pp.11–16).
Detailed LAN configurations need to be done with a browser later.
First, complete the Wired LAN connection between computers and projec -
tors, then start browser configurations.
	➔  “3. Basic setting and...

10
Chapter 1 Preparation