Eiki Projector Lc Hdt700 User Manual

							41
ENGLISH
 
Setting up the projector
Item  Description
Screen aspect  .... 
Sets the aspect. {Default(16:9), 16:10, 4:3}  
Keystone ................ 
Corrects the keystone distortion of the 
projected image on the screen by press-
ing the Up/Down/Left/Right buttons.  
Click Reset to reset the keystone correc-
tion.
Digital zoom  .......  Adjusts the image zoom in and out at 
computer input mode. 
Click OFF to return the image to its nor -
mal size.
Reset .........................   Resets the settings of Screen, Ceiling, 
Rear, Keystone and Digital zoom.
Item  Description
Zoom  .......................  
Adjusts the image zoom in and out.
Focus  ........................  
Adjusts the focus of the image.
Lens shift  ............... 
Positions to the desired point by pressing the Up/Down/Left/Right buttons. 
Click Reset to return to the center position.
* Step(s)  ..................  Sets the effective steps (1-20 steps) by one pressing the +/- or Up/Down/Left/Right 
buttons to adjust them quickly.
Lens adjustment
 
✐  The mark "4" means that 
the available screen mode 
in the selected input 
source system.
*1   The error message appears 
when selecting the dis -
abled screen mode indi -
cated with "*1".
*2   Natural wide cannot be 
selected when 720p, 1035i, 
1080i or 1080p is selected 
in AV system menu. Screen Aspect Default(16:9)16:10 4:3
Input source Input sourceInput source
Screen mode VideoPCVideo PCVideo PC
Normal 444444
Full 444444
Wide(16:9) *1*1
4444
Zoom 444444
True *1
4*1
4*1
4
Natural wide *2*1*2*1*1*1
Custom
44444 4 
						

							42
Chapter 4 Controlling the Projector
Item  Description
Filter control  ....... 
Scroll the filter. Click "Roll-up", a confir -
mation display appears, and then click 
"OK", the filter will be scrolled. 
Fan speed control  ...   Sets the running speed for the cooling 
fans. (Normal, Max) 
Remote control....   Selects the remote control code. 
(Code1 - Code8) 
Power management ...   Sets into the selected power manage -
ment mode (OFF, Ready 1, Ready 2, 
Shut down) if the input signal is inter -
rupted and no control key is pressed 
for the specified period of time.
  * The specified time can be set 1 t o 30 
min.
Direct on  ................  Sets the power-on mode when the AC cord  is connected to the outlet. 
Key lock  .................. 
Sets the prohibition of controls either Projector or Remote control. (OFF, Projector, 
Remote control)
PJ lock suspend...  When the projector has a security of PIN code lock, disable this function temporarily 
by pressing Execute button.
Setting procedure
1. Turn off the projector , disconnect AC cord from the outlet and then connect AC cord again.
2. Access this page with the web browser.
3. Click Execute button on the PJ lock suspend.
* See the next page for the description of other functions.
Item   Description
Input button  ....... 
Sets the input search mode by pressing 
the INPUT button of the projector and the 
remote control. (Mode1, Mode2, Mode3)
Display  ....................   Switches on or off the on-screen menu 
display on the screen. (ON, Countdown off, 
OFF)
Countdown off  .......  Displays input image instead the 
countdown during the startup.
Background  .........  Sets the screen background when no sig-
nal input. (Blue, User, Black)
Logo  .........................   Sets on or off the logo display on the 
screen during the startup. (User, Default, 
OFF) 
Picture in Picture ...   Sets the Picture in Picture mode. (OFF, User1 - User5) Edge blending ......  
Sets the seamless overlapping for multi-screen. (ON, OFF)Color matching ........ Corrects the difference of color for multi-screen. (ON, OFF)
HDMI setup  ......... 
Sets the input signal from HDMI input.
Image  ............. 
Sets the Digital RGB image level of HDMI. (Normal, Enhanced)
Lamp control  ...... 
Selects lamp control mode. (Auto, Normal, Eco1, Eco2)
Setting 1
Setting 2 
						

							43
ENGLISH
 
Setting up the projector
Item  Description
Closed caption . .  
Sets the closed caption function. 
 
Closed caption  ...  
Sets the closed caption mode. (OFF, 
CC1, CC2, CC3, CC4)
  Color  .....................   Sets the color of the contents. (Color, 
White) 
Lamp Corres. Value(h) ...   Displays the lamp use time 
(Corresponding value). Reset the time 
after lamp replacement. Click "Reset", 
a confirmation display appears, and 
then click "OK", the time will be reset.
Filter counter(h) ...   Displays the filter counter. Reset the 
time after filter cartridge replacement. 
Click "Reset", a confirmation display 
appears, and then click "OK", the time 
will be reset. 
    *  Do not reset the Filter counter when the filter cartridge is not replaced.
Filter warning ..... 
Sets the time to indicate the filter warning message on the screen. (OFF, 400H, 700H, 
1000H) 
Scrolls remaining ...   Displays  the scrolls remaining of the filter. Reset the scroll counter after filter car -
tridge replacement. Click "Reset", a confirmation display appears, and then click "OK", 
the time will be reset. 
    *  Do not reset the Scrolls remaining when the filter cartridge is not replaced.
Freeze  ......................  
Sets the image to freeze mode.  (ON, OFF)
Test pattern  ......... 
Sets the preset image of the projector. (OFF, Color, Gradation1 -  Gradation4, All 
white, All black, Cross)
Factory default ...   Sets all of the projector control items to the factory default setting except the fol-
lowing items.
    User Logo, Logo PIN code lock, PIN code lock, Lamp Corres. Value, Filter counter, PJ 
time, Network PIN code, Network setting
    *  
This function is not effective for the settings of Network address settings, e-mail 
settings, etc.
Setting 3
Continue from the previous page.
Item   Description
Shutter  ....................  
Sets the shutter operation. (ON: close, 
OFF: open)
Shutter  
management  .....  Sets the shutter management opera-
tion.
  Release key  ......  Sets available keys to release the shutter. (Any, SHUTTER) 
  Time  ......................  
Sets the specified period of time when the projector shuts down after the projector 
is left with the shutter closed.
* The specified time can be set 5 to 480 min. 
						

							44
Chapter 4 Controlling the Projector
Information
This  page  is  to  display  the  basic  information  of  the  projector  status.  Click 
Information on the main menu.
Click this button to 
update the information.
Items  Description
Input  ............................................  
Displays selected input and source.
System  ....................................... Displays selected signal system.
Signal  .......................................... Input signal status (Yes, No)
Screen  ........................................ Displays screen mode.
Lamp status .............................  
Displays lamp status with an icon. Refer to the table as shown in the next 
page.
Security  ..................................... Displays the security (Key lock and PIN code lock) status.
Shutter  .......................................   Displays the shutter status. (OFF: open, ON: close)
PJ time(h)  .................................
 
Displays the accumulated use time of the projector.Lamp Corres. Value(h)  ..... 
Displays the use time (Corresponding value) of the lamp.
Filter time(h)  .......................... 
Displays the accumulated use time of the filter.
Filter condition  ......................  
Displays filter status with an icon. Refer to the table as shown in the next 
page.
* When PIP mode is active, displays Input, System, and Screen to "PIP mode".
Information
Network
Items 
Description
MAC address  Displays MAC address of the projector.
IP address  Displays the IP address of the projector. 
						

							45
ENGLISH
 
Information
Indication of the lamp status
Icon display/backgroundStatus
 White/BlueLamp on (Normal)
White/RedLamp on (Lamp is being used over a specified use time, replace lamp 
immediately)
Gray/BlueLamp off (Normal)
Gray/RedLamp off (Lamp is being used over a specified use time, replace lamp 
immediately)
Red/Blue with XLamp failure (Lamp failure, check lamp condition)
Red/Red with XLamp failure (Lamp failure and lamp is being used over a specified use 
time, replace lamp immediately)
Icon display/background Status
 
BlueGood condition.
 Yellow/GrayFilter is almost clogged.
 Red/GrayFilter is clogged. Replace a filter with new one.
*   When the projector cannot decode the return from the filter cartridge, 
this icon also appears. 
Indication of the filter status 
						

							46
Chapter 4 Controlling the Projector 
						

							ENGLISH
47
ENGLISH
Chapter 5 
 Appendix 5
Connection examples
Use of telnet
Web browser setting Q & A 
						

							48
Chapter 5 Appendix
Examples of connection
Peer-To-Peer connection
Connecting the projector (PJ01) to the control computer (PC05) directly.
Projec tor Name: P J01
IP Addr ess  : 192.168.0.2
Subnet Mask  : 255.255.255.0
Default Gateway  : 0.0.0.0
DNS  : 0.0.0.0
Computer Name: PC10
IP Addr ess  : 192.168.0.10
Subnet Mask  : 255.255.255.0
Default Gateway  : 
DNS  : 
C
omputer Name: PC05
IP Addr ess  : 192.168.0.5
Subnet Mask  : 255.255.255.0
Default Gateway  : 
DNS  : 
Hub
Projec tor Name: P J01 
IP Addr ess  : 192.168.0.2 
Subnet Mask  : 255.255.255.0 
Default Gateway  : 0.0.0.0 
DNS  : 0.0.0.0 Computer Name: PC05 
IP Addr ess  : 192.168.0.5 
Subnet Mask  : 255.255.255.0 
Default Gateway  :  
DNS  :  
* UTP cross cable
Connecting the projector (PJ01) to the control computer (PC05) via the hub.
✐  When the projector is connected to the computer directly without hub, the UTP cross cable 
should be used.
To another network 
						

							49
ENGLISH
 
The gateway (Router) installed in the network
Connecting the projector (PJ01) to the control computer (PC05) via the gateway.
To another netw ork
Ne
twork Gr oup: 192.168.200.x 
Ne twork Gr oup: 192.168.10.x 
Projec tor Name: P J01 IP Address  : 192.168.200.15 
Subnet Mask  : 255.255.255.0 
Default Gateway  : 192.168.200.1 
DNS  : 192.168.201.1  C
omputer Name  : PC205 
IP Addr ess  : 192.168.200.5 
Subnet Mask  : 255.255.255.0 
Default Gateway  : 192.168.200.1 
DNS  : 192.168.201.1 
IP Address : 192.168.200. 1
IP Address : 192.168.10.1 
IP Address : 192.168.100.1 
C omputer Name: PC05 
IP Addr ess  : 192.168.10.5 
Subnet Mask  : 255.255.255.0 
Default Gateway  : 192.168.10.1 
DNS  : 192.168.201.1 C
omputer Name  : PC10 
IP Addr ess  : 192.168.10.10 
Subnet Mask  : 255.255.255.0 
Default Gateway  : 192.168.10.1 
DNS  : 192.168.201.1  C
omputer Name  : PC51 
IP Addr ess  : 192.168.10.51 
Subnet Mask  : 255.255.255.0 
Default Gateway  : 192.168.10.1 
DNS  : 192.168.201.1  C
omputer Name  : PC61 
IP Addr ess  : 192.168.10.61 
Subnet Mask  : 255.255.255.0 
Default Gateway  : 192.168.10.1 
DNS  : 192.168.201.1 
Gateway (Router) 
Hub 
Hub 
Hub 
Entrance hall 
Of ce
Examples of connection 
						

							50
Chapter 5 Appendix
Use of telnet
You can control the projector by using the telnet application*1 installed on your computer.  
Normally, the telnet application is available on your computer.
* The telnet 10000 port is used to control the projector.
Control
(For example, in case of using the telnet 
application of Windows XP Professional .)
1.   Select  Run... submenu from  Start menu 
on  the  computer.  Type  "telnet"  onto  the 
Open  text area on the displayed window 
and press OK  button. 
2.   The  telnet  application  will  start  and  the  following  window  will  be  displayed.  Type  as 
below to connect the projector.
  > open 192.168.1.201 10000 [return]
*    Use the IP address assigned to the projector.
(For example, in case of using the telnet 
application of Mac OS X v 10.4 )
1.   Select Terminal  from Applications  
- -> Utilities .  
　 Type  as below on the displayed window. 
      > telnet [return]