Dukane Imagepro 8776-W Lcd Projector Users Manual

							


4.2.3. Slide show
Slide show (fig.4.2.3) displays a full screen image and move to the next interval. 
Click the “SLIDE SHOW” button in Web Remote Control, then Slide show will be 
played. Display time can be set by the Playlist (refer to section 4.3) and menu.
Fig. 4.2.3 Slide show
4.2 Utilize “PC-LESS Presentation” – Advanced - (Continued)
Following operations are accessible while slide show is displayed.
* These operations are not accessible while projector OSD menu is displayed.
• It is impossible to change the input port by INPUT button if 
THUMBNAIL, SLIDE SHOW, or DIRECTORY is displayed.
• Displays the projector Menu before changing the input port .
• Images can be displayed when it is recorded in the Playlist.
• Image can not be displayed in the thumbnail if it is not recorded in the Playlist. (67)
• The START #, STOP #, INTERVAL, and MODE are set by thumbnail menu 
once, this setting has more priority than the Playlist.
• If you would like to release the priority, delete the slidemode.txt file from 
directory.
• When SLIDE SHOW mode is set to ONE TIME, the last slide of the 
presentation will be held on screen till either of ENTER key the remote or 
INPUT key on the projector is pushed.
NOTE
Full-screen Display
ENTER
INPUT
Remote control
KeypadDisplay thumbnails.
MENURemote controlDisplays PC-LESS PRESENTATION Menu.
4. Utilize projector – Advanced - 
						

							


4.2 Utilize “PC-LESS Presentation” – Advanced - (Continued)
You can also play the Slide show with the projector Menu.
Select “SLIDE SHOW” on PC-LESS PRESENTATION Menu. And press the Enter 
button on the remote control or ► button on Keypad.  Then Slide show will start.
You can play the Slide show at your desired configuration.
Configure the Slide Show items in THUMBNAIL.
1) START #   : Set the beginning number of Slide show.
2) STOP #   : Set the end number of Slide show.
3) INTERVAL   : Set the interval Slide show.
4) MODE   :   Select the Slide show mode. 
ONE TIME : Play the Slide show one time. 
ENDLESS : Play the Slide show endless.
5) PLAY   : Play the Slide show.
2%.5524506#6+10
6*7/$0#+.
5.+&5*19
&+4%64;&+52.#;5+
						

							


4.2.4 Director y display
Directory display (Fig.4.2.4) shows saved directories and files including 
undisplayable files in the memory card on the tree structure. Click the 
“DIRECTORY” button in the Web Remote Control, then the directory tree will be 
displayed. While displaying directory, preview picture of selected file is shown on 
the top left. In case of moving picture, initial flame is displayed as preview. Nothing 
is displayed in case of directories or undisplayable files. Displayable file can be 
played if “ENTER” is clicked when its file is selected. 
Select the directory and press the Enter button, then the files in the directory will 
be displayed in the thumbnail.
Fig. 4.2.4 Directory display screen
4.2 Utilize “PC-LESS Presentation” – Advanced - (Continued)
Tree structure directory
File information 
Image display preview
4. Utilize projector – Advanced - 
						

							
64

4.2 Utilize “PC-LESS Presentation” – Advanced - (Continued)
Following operations can be accessible while directory is displayed.
* These operations are not accessible while projector OSD menu is displayed.
• It is not possible to change the input port by INPUT button when 
THUMBNAIL, SLIDE SHOW, or DIRECTORY is displayed.
• Displays the projector Menu before changing the input port .
• Only alphanumeric characters can be used for directory name and file name.
• This directory display is able to show up to 10 layers. Over 10 layers of files 
and folders can not be shown. Some files and directories are not displayed 
if there are too many. In this case, delete some files in the directory or some 
directories in the memory card.
NOTE
▲/▼Moving selected item upward or downward.
►Open the closed folder.
◄Close the folder.
PAGE UP  PAGE DOWN
Remote control
Show undisplayed portion if the tree display is not fit inside the screen.
ENTER
INPUT
Remote control
Keypad
Play displayable file. While directory is selected, thumbnail is displayed. It is not possible to play undisplayable file. Click “ENTER” while playing, so it returns to the directory display.
MENURemote controlDisplays the menu.
4. Utilize projector – Advanced - 
						

							


4.2 Utilize “PC-LESS Presentation” – Advanced - (Continued)
You can also display the directory with the projector Menu.
Select “DIRECTORY” in PC-LESS PRESENTATION Menu. And press the Enter 
button on remote control or ► button on Keypad. Then directory will be displayed.
[File information display]
 File information display shows following information.
Displayable still image file
- File format (JPEG, PNG and BMP)
- Time stamp (When file is created)
- File size (Size of File)
- Image size (File resolution)
Displayable moving image file
- File format (MP4)
- Time stamp (When the file is created)
- File size (Size of File)
- Movie size (File resolution)
- Movie time (Play time)
Undisplayable file
- File format (Directory: Directory, Undisplayable file: File)
- Time stamp (When file is created)
- File size (Size of File)
2%.5524506#6+10
6*7/$0#+.
5.+&5*19
&+4%64;&+52.#;5+
						

							


4.2.5 “PC-LESS Presentation” error message
Error message is displayed at a specific condition while “PC-LESS Presentation” 
mode. It appears at the bottom and the gray area of screen.
Fig. 4.2.5 “PC-LESS Presentation” error message
4.2 Utilize “PC-LESS Presentation” – Advanced - (Continued)
“PC-LESS Presentation” error message list
Error messageError contentDisplay mode
File not foundDisplayable file does not exist.Display in full screen and slide show
Illegal Playlist file
Play list file has malfunction. (Over 64kB file, over 1022 characters per line in file or linefeed code malfunction)
Display in full screen and slide show
4. Utilize projector – Advanced - 
						

							


Playlist is a DOS format text file, which decides the order of displayed still image 
files or moving image files in the thumbnail or the slide show.
Playlist file name is [imagelistdir.txt]. It is created in each folder when “PC-LESS 
Presentation” is displayed. The timing of playlist creation is when “PC-LESS 
Presentation” is displayed in the directory, which any playlist file does not exist. 
The playlist is created in the displayed directory.
4.3 Playlist
• Playlist can not be overwritten. Once it is created, data remains. 
Therefore, the image can not displayed if it is additionally saved to the memory 
card that is on the playlist. In order to see added picture file, delete playlist.
NOTE
Playlist is editable on the PC. Display time and rotation information at the slide 
show can be set based on specifying settings. Of course it is possible to make 
certain file image undisplayable in a playlist deleting 1 line relating to the file from 
playlist. Also, it is possible to see added picture image based on adding picture 
image file name and pass name of destination to save in playlist.
[Example of adding image file] (Pass name/pass name/…/file name, display 
time, rotation information)
images/photo1/img001.jpg
images/photo1/img002.jpg, 2000
images/photo1/img003.jpg, 500, rot1
images/photo1/img004.jpg
images/photo1/img005.jpg, 500, rot2
The number after the extension is the slide show display time. It can be set 
between 0 and 999900. (ms) Least input increment is 100 ms. The end of display 
time means rotation information. 90 degrees clockwise rotation becomes rot1, rot2 
and rot3. (When no rotation, not specify or specify rot0.)
Display time and rotation information should be used “,” for separation.
• Maximum characters for the playlist in 1 line at playlist is 1024 
including linefeed. If it exceeds, playlist becomes invalid and error.
• Playlist maximum size is 64kB. If it exceeds, it becomes invalid.
• Playlist can register up to 999 image files. If it exceeds, first 999 files can be 
utilized.
• When image file is added to the memory card and be able to see on the screen, 
delete existing playlist in the memory card.
Caution
4. Utilize projector – Advanced - 
						

							
68

4. Utilize projector – Advanced -
The projector can automatically send an alert to specified e-mail addresses when 
the projector requires maintenance or has encountered an error.
• Up to five e-mail addresses can be specified.
• The projector may be not able to send e-mail if the projector suddenly loses 
power.
NOTE
Mail Settings (26)
To use the projector’s e-mail function please configure the following items via a 
web browser.
Example: If the IP address of the projector is set to 192.168.1.10/:
• A Network Restart is required after the SMTP Port configuration 
settings have changed. Click [Network Restart] and configure the following 
items.
NOTE
 6)  Click [Mail Settings] and configure each item. Refer to the [Mail Settings] 
item in [Configuring and Controlling the Projector via a Web Browser] for 
further information.
 7) Click the [Apply] button to save the settings.
• Click the [Send Test Mail] button in [Mail Settings] to confirm 
that the e-mail settings are correct. The following mail will be delivered to the 
specified addresses.
NOTE
Subject line   : Test Mail   
Text  : Send Test Mail
   Date   
 Time   
 IP Address   
 MAC Address   
 1) Enter [http://192.168.1.10] into the address bar of the web browser.
 2) Enter the Administrator ID and Password and click [Logon].
 3) Click [Port Settings] on the main menu.
 4) Click the [Enable] check box to open the SMTP Port.
 5) Click the [Apply] button to save the settings.
4.4 Failure & Warning Alerts via E-mail 
						

							


4. Utilize projector – Advanced -
 8)  Configure the Failure/Warning Alerts via E-mail settings. Click [Alert Settings] 
on the main menu.
 9)  Select and configure each alert item. Refer to [Alert Settings] in [Configuring 
and Controlling the Projector via a Web Browser] for further information.
10) Click the [Apply] button to save the settings.
Failure/Warning e-mails are formatted as follows:
Subject line   :    
Text   : 
   Date   
 Time   
 IP Address   
 MAC Address   
Mail Settings (Continued) 
						

							
70

When SNMP is enabled, the projector is able to send Failure/Warning Alerts to a 
specified PC.
• It is recommended that SNMP functions be carried out by a network 
administrator. 
• SNMP management software must be installed on the computer to monitor 
the projector via SNMP.
NOTE
SNMP settings (25)
Configure the following items via a web browser to use SNMP.
Example: If the IP address of the projector is set to 192.168.1.10/:
• A Network Restart is required after the SNMP Trap configuration 
settings have been changed. Click [Network Restart] and configure the 
following items.
NOTE
 5) Click [Security Settings] on the main menu.
 6) Click [SNMP] and set the Community Name on the screen that is displayed.
• A Network Restart is required after the Community Name has been 
changed.
• Click [Network Restart] and configure the following items.
NOTE
 7)  Configure the settings for Trap transmission of Failures/Warnings. Click 
[Alert Settings] on the main menu and select the Failure/Warning item to be 
configured.
 8)  Click the [Enable] check box to send out the SNMP trap for Failures/Warnings. 
Clear the [Enable] check box when SNMP trap transmission is not required.
 9) Click the [Apply] button to save the settings.
 1) Enter [http://192.168.1.10] into the address bar of the web browser.
 2) Enter the Administrator ID and Password and click [Logon].
 3) Click [Port Settings] on the main menu.
 4)  Click the [Enable] check box to open the SNMP Port. 
Set the IP address to send the SNMP Trap to when a  Failure/Warning occurs.
4. Utilize projector – Advanced -
4.5 Projector management via SNMP