Dukane Imagepro 8776-W Lcd Projector Users Manual

							
LCD Projector
Model 8776-W
USER’S MANUAL
Includes: Technical Information & Networking Operation
401-8776-W-00 
						

							
Projector
8776-W
User's Manual – Operating Guide
Thank you for purchasing this projector.
WARNING  ► Before using this product, please read the "User's Manual - 
Safety Guide" and related manuals to ensure the proper use of this produ\
ct. 
After reading them, store them in a safe place for future reference.
About this manual
Various symbols are used in this manual. The meanings of these symbols are 
described below. 
WARNING  This  symbol  indicates  information  that,  if  ignored,  could  possibly 
result in personal injury or even death due to incorrect handling.
CAUTION  This  symbol  indicates  information  that,  if  ignored,  could  possibly 
result  in  personal  injury  or  physical  damage  due  to  incorrect 
handling.
  
Please refer to the pages written following this symbol.
 
NOTE   • The information in this manual is subject to change without notice.
• The manufacturer assumes no responsibility for any errors that may appear in this manual.
• The reproduction, transfer or copy of all or any part of this document is not permitted  without express written consent.
Trademark acknowledgment • VGA and XGA are registered trademarks of International Business Machines Corporation.
• Apple and Mac are registered trademarks of Apple Computer, Inc.
• VESA and SVGA are trademarks of Video Electronics Standard Association.
• Windows is a registered trademark of Microsoft Corporation.
All other trademarks are the properties of their respective owners. 
						

							
About this manual. . . . . . . . ..1
Content.. . . . . . . . . . . .. . . ..2
Contents of package.. . . . ..3
How to use the Slot cover lock .. . ..3
Projector features . . . . . . . . ..4
Preparations . . . . . . . . . . . ...4
Fastening the lens cover . . . . . . . . ..4
Part names. . . . . . . . . . . . ...5
Projector .. . . . . . . . . . . . . . . . . . . ..5
Control buttons .. . . . . . . . . . . . . . ..7
Remote control .. . . . . . . . . . . . . . ..7
Setting up. . . . . . . . . . . . ....8
Arrangement .. . . . . . . . . . . . . . . . ..9
Adjusting the projector's elevator ..10
Using the Security Bar . . . . . . . . . ..11
Connecting your devices  . . . . . . . ..12
Connecting power supply . . . . . . ..15
Inserting an SD Card and USB Memory ..16
Remote control . . . . . . . . . ..17
Putting batteries .. . . . . . . . . . . . ..17
Using the remote control . . . . . . . ..18
Power on/off. . . . . . . . . . . ..19
Turning on the power . . . . . . . . . . ..19
Turning off the power  . . . . . . . . . . ..19
Operating. . . . . . . . . . . . ...20
Adjusting the volume . . . . . . . . . . ..20
Temporarily muting the sound  . . . ..20
Selecting an input signal  . . . . . . . ..20
Searching an input signal . . . . . . ..21
Selecting an aspect ratio . . . . . . . ..21
Adjusting the zoom and focus  . . . ..21
Using the automatic adjustment feature ..22
Adjusting the position . . . . . . . . . ..22
Correcting the keystone distortions .23
Using the magnify feature . . . . . . ..23
Freezing the screen . . . . . . . . . . . ..24
Temporarily blanking the screen ...24
Operating the computer screen  . . ..25
Multifunctional settings. . ..26
Using the menu function  . . . . . . . ..26
Content
Content
EASY Menu  . . . . . . . . . . . . . . . . . ..27
Aspect,  Auto keystone Execute, 
Keystone, Picture mode, Brightness, 
Contrast, Colo
r, T int, Sharpness, 
Whispe
r , Mirror, Reset, Filter time, 
Language, Go to advanced menu
PICTURE Menu . . . . . . . . . . . . . . ..29
Brightness, Contrast, Gamma,
Color temp, Colo
r, T int, Sharpness, 
   My memory
IMAGE Menu  . . . . . . . . . . . . . . . . ..32
As pect, Over sc an, V. position , H. position , 
H. phase, H. size, Auto adjust execute
INPUT Menu . . . . . . . . . . . . . . . . ..34
Progressive, V ideo NR, Color space, 
Component, 
V ideo format, Frame lock, 
RGB in, Resolution
SETUP Menu  . . . . . . . . . . . . . . . . ..37
Auto keystone Execute, Keystone, 
Whispe
r , Mirror, V olume, Audio
SCREEN Menu  . . . . . . . . . . . . . . ..39
Language, Menu position, Blank,
Start up, MyScreen, MyScreen lock, 
Message, Source name
OPTION Menu . . . . . . . . . . . . . . . ..42
Autosearch,  Auto keystone, Auto on, 
Auto o
f f, Lamp time, Filter time, 
My button, Service, Security
MIU Menu . . . . . . . . . . . . . . . . . . ..52
Live Mode, PC-LESS Presentation, 
Setup, e-SHOT, Information, Service
Maintenance . . . . . . . . . . . ..57
Lamp . . . . . . . . . . . . . . . . . . . . . . ..57
Air filter . . . . . . . . . . . . . . . . . . . . ..59
Replacing Internal Clock battery . ..61
Other care  . . . . . . . . . . . . . . . . . . ..62
Troubleshooting. . . . . . . . ..63
Related messages . . . . . . . . . . . . ..63
Regarding the indicator lamps . . . ..64
Phenomena that may be easy to be 
mistaken for machine defects . . . ..66
Warranty and after-ser vice. ..69
Specifications . . . . . . . . . . ..69
??

Technical Info Section . . . . 1-17
Network Functions Sec. . . . 1-832 
						

							
3

Contents of package
() Projector
() Remote control 
     with two AA batteries
(3) Power cord
(4) RGB cable
(5) Audio/Video cable
(6) Soft case
(7) User’s manuals
(8) Lens cover, Rivet and Strap
(9) Wireless Network Card
(0) Slot cover lock
() Application CD
()()(3)
(6)
NOTE    •  Keep  the  original  packing  materials  for  future  reshipment.  For 
moving the projector, be sure to use the original packing materials. Use special 
caution for the lens part.
(7)
(4)(5)
(8)
HOMEPAGE UPPAGE DOWNEND
VIDEORGBSEARCH
FREEZEOFFONMAGNIFYASPECTAUTOBLANKMUTEVOLUMEKEYSTONEMY BUTTONPOSITION1 2
ESCENTERMENURESET
(9)
Contents of  package
(0)()
How to use the Slot cover lock
Open the Slot cover lock, and 
insert it into the Locking slot.
Close the Slot cover lock slowly, 
and attach the Pad lock or 
Combination lock to the Slot cover 
lock. 
						

							4
Fastening the lens cover
To avoid losing the lens cover, please fasten it the lens cap to the projector using 
the strap.
. Fix the strap to the strap ring of the lens cover.
. 
Put the strap into the groove on the rivet.
3. 
Push the rivet into the strap hole.
Projector features / Preparations
Projector features
This projector is used to project various computer signals as well as NT\
SC/PAL/
SECAM, Component (SD, HD) video signals onto a screen. It requires jus\
t a little 
space for installation and gets a large image from short distance.
  High Brightness
Newly developed  00W UHB (Ultra High Brightness) lamp gives you a  brighter 
image on  the screen.  The image  is bright enough for use in fully lighted rooms.  
enough for use in bright rooms.
  Low Noise
WHISPER mode is available for reducing acoustic noise  and quieter 
operation. It is perfect for use in  dimly lighted rooms where low noise is more 
important than brightness.
  Rich Connectivity
This projector has a variety of I/O ports. It can be easily connected to\
 many 
signal sources like PC, DVD and so on. The rich connectivity provides you 
more options  for an impressive  presentation.
  Compact Body
Even with its many features, this projector  has a small form factor.
which gives y\
ou more flexiy
Eility and usy
Dbility to usy
H it where yoy
X want.
Strap ring
Strap Strap hole
Bottom side
Preparations 
						

							
5

Part names
Part names
Lens (19) 
Filter cover (59)(Air filter and intake vent are inside.)
Elevator button (10) 
Elevator foot (10) 
Remote sensor (18)
Zoom ring (21)
Focus ring (21)
Vent
Projector
Lamp cover (58) (Lamp unit is inside.) 
Bottom side
Speaker
Lens cover (4) 
Security bar (11)(Use for attaching a commercial anti-theft chain or wire.)
Control buttons (7)
WARNING  ►During use or immediately after use, do not touch around the 
lamp and vents of the projector. (ê) It could cause a burn.
AUDIO IN3AUDIO IN2CB/PBCR/PRAUDIO IN1RGB IN1RGB IN2
SD CARDAUX  I/ODC  5V  0.5ALANCONTROLRGB OUTAUDIO OUTUSB
VIDEO
Y
S-VIDEO
CLOSEOPEN
ê
Front-Right side
ê 
						

							
6

AC inlet (15)
Power switch (19)
Elevator button (10) 
COMPONENT VIDEO ports (14)YCB/PBCR/PR
S-VIDEO port (14)
VIDEO port (14)
CONTROL port (13)
Elevator foot (10) 
Rear-Left side
Ports (See below.)
Vent
AUDIO OUT port (13)
AUDIO IN port (
13)(In the default setting, the AUDIO 
IN port is the audio port for 
the RGB IN port, however, it is 
possible to change the settings. 38)
AUDIO IN3 L/R port (14)(In the default setting, the AUDIO IN3 L/R port is the audio port for the VIDEO, S-VIDEO and COMPONENT VIDEO ports, however it is possible to change the settings. 38) RGB IN port (13)
NOTE  (*) About Restart switch: This projector is controlled by an internal 
microprocessor. Under certain exceptional circumstances, the projector may not 
operate correctly and the microprocessor will need to be reset. In such \
a case, 
please push the Restart switch by using a cocktail stick or similar, and before 
turning on again, make the projector cool down at least 0 minutes without 
operating. Only push the Restart switch in these exceptional instances.
Restart switch (*) (66)
Part names
USB port (13)
CR/PRCB/PBAUDIO IN2AUDIO IN1RGB IN1RGB IN2
SD CARDAUX  I/ODC  5V  0.5ALANCONTROLRGB OUTAUDIO OUTUSB
VIDEOS-VIDEOAC  IN
Kensington lock slot
RGB OUT port (13)
RGB IN
 port (
13)
AUDIO IN port (
13)
(In the default setting, the AUDIO IN port is the audio 
port for the RGB IN port, however, it is possible to 
change the settings. 38)
SD CARD slot (13)This slot is used when utilizing SD CARD.
AUX I /O port (13)This port is used when utilizing USB Memory.
LAN port (13)Used for Ethernet input/output.This port is used when utilizing network functions.
LAN
Y R
L
AUDIO IN3
AUDIO IN1AUDIO OUT
USB
RGB OUT
AUDIO IN2
VIDEOS-VIDEO
CB/PB
CR/PRCONTROL
RGB IN2RGB IN1
K
AUX I/OSD CARD
Ports 
						

							
7

SEARCH button (21)
RGB button (20)
VIDEO button (21)
ASPECT button (21)
HOME button (25)
MAGNIFY
 ON button (23)
 OFF button (23)
END button (25)
FREEZE button (24)
POSITION button (22)
ESC button (25)
Part names
Remote control
Battery cover (17)
(on the back)
STANDBY/ON button (19)
AUTO button (22)
BLANK button (24)
PAGE UP button (25)
VOLUME button (20)
MUTE button (20)
PAGE DOWN button (25)
KEYSTONE button (23)
MY BUTTON button (43)
MENU button (26)
Cursor buttons
▲,▼,◄,► (26)
ENTER button (26)
RESET button (26)
HOME PAGE UP 
PAGE DOWN END 
VIDEO RGB  SEARCH 
FREEZE 
OFF 
ON MAGNIFY 
ASPECT AUTO BLANK 
MUTE 
VOLUME 
KEYSTONEMY BUTTON
POSITION 
1 2
ESC 
ENTER 
MENU 
RESET 
Control buttons
LAMP indicator (64, 65)
TEMP indicator (64, 65)
POWER indicator (19)Cursor buttons
▲,▼,◄,► (26) 
STANDBY/ON button 
(19) INPUT button (20) 
NOTE  • INPUT button is function as ENTER key when the projector is in the 
PC-LESS presentation mode. Use the RGB button or VIDEO button on remote 
control to change the input port. When the projector menu is displayed, you can 
change the input port by INPUT button. 
						

							
8

Setting up
Setting up
WARNING  ►Place the projector in a stable position horizontally. A fall or 
a turnover could cause an injury and/or damage to the projector. Then using 
damaged projector could result in a fire and/or an electric shock.
•  Do not place the projector on an unstable, slant or vibrant surface such\
 as a 
wobbly or inclined stand.
•   Do not place the projector in the side/front/rear-up position, except cl\
eaning 
the air filter. 
►Place the projector in a cool place, and pay attention enough to ventilation. 
The high temperature of the projector could cause a fire, a burn and/or 
malfunction to the projector.
•  Do not stop up, block and cover the projector's vents.
•   Keep a space of 30 cm or more between the sides and other objects such a\
s 
walls.
• Do not place the projector on a metallic thing or anything weak in \
heat.
•  Do not place the projector on a carpet, cushion or bedding.
•   Do not place the projector in direct sunlight or near a hot object such \
as a 
heater.
•   Put nothing about lens and vents of the projector. Put nothing on the projector.
•   Put nothing that is sucked or sticks to the bottom of projector. This projector 
has some intake vents also on the bottom.
►Do not place the projector on the place that gets wet. Damping the projector 
or inserting liquid in the projector could cause a fire, an electric shock and/or 
malfunction to the projector.
•  Do not place the projector in a bathroom or the outdoors.
•   Put nothing containing the liquid near the projector.
CAUTION  ►Avoid a smoky, humid or dusty place. Placing the projector 
in such place could cause a fire, an electric shock and/or malfunction to the 
projector.
• Do not place the projector near a humidifier, a smoking space or a kitchen.
►Adjust the position of the projector to prevent any strong light, like direct 
sunlight or inverter fluorescent lamp light, from hitting the projector ’s remote 
sensor.