Dukane Imagepro 8776-W Lcd Projector Users Manual

							


Projector
8776-W
User’s Manual – Network Functions Section
This section is only intended to explain Network Functions.
• The information in this manual is subject to change without notice.
• The manufacturer assumes no responsibility for any errors that may appear in 
this manual.
• The reproduction, transfer or copy of all or any part of this document is not 
permitted without express written consent.
NOTE
Trademark acknowledgment
 • Windows is a registered trademark of Microsoft Corporation.
All other trademarks are the properties of their respective owners.
Due to the continual evolution of software, this guide and the associated 
programs  will  be  continually  updated.  The  upgrade  will  be  provided  free 
and will be provided by Hitachi. Please check the following web addresses 
to get the latest revisions.
    
http://www.hitachi.us/digitalmedia or
http://www.hitachidigitalmedia.com  
						

							


Contents
Caution ………………………………………………\
……………………………………31. Main Functions ………………………………………………\
………………………51.1 Live Mode  ………………………………………………\
…………………………51.2 PC-LESS Presentation  ………………………………………………\
…………62. Equipment connection and network setting  ……………………………82.1 Required equipment preparation ………………………………………………\
82.2 Network connection using “One-Click-Communication”        function  ………………………………………………\
……………………………82.3 Manual network connection setting – Wired LAN -   ………………………102.3.1 Equipments connection ………………………………………………\
……102.3.2 Network settings  ………………………………………………\
……………112.3.3 “Internet Option” setting  ………………………………………………\
…142.3.4 Check connection ………………………………………………\
……………152.4 Manual network connection setting – For wireless LAN -   ………………162.4.1 Preparation for wireless LAN connection  ………………………………162.4.2 Wireless LAN connection set up  …………………………………………172.5 Configuring and Controlling the projector via a web browser ……………192.5.1 Network Information  ………………………………………………\
………222.5.2 Network Settings ………………………………………………\
……………232.5.3 Port Settings ………………………………………………\
…………………252.5.4 Mail Settings  ………………………………………………\
…………………262.5.5 Alert Settings ………………………………………………\
…………………272.5.6 Schedule Settings ………………………………………………\
……………322.5.7 Date/Time Settings  ………………………………………………\
…………342.5.8 Security Settings ………………………………………………\
……………362.5.9 Projector Control ………………………………………………\
……………382.5.10 Projector Status ………………………………………………\
……………412.5.11 Network Restart  ………………………………………………\
……………412.5.12 Logoff ………………………………………………\
…………………………412.6 Utilize Web Remote Control  ………………………………………………\
……423. How to use Projector software – Basics -  …………………………………443.1 How to use “MIU Live Viewer”   ………………………………………………\
…443.1.1 Install “MIU Live Viewer”   ………………………………………………\
…443.1.2 Software Installation Procedure  …………………………………………453.1.3 Explanation of “MIU Live Viewer”   ………………………………………463.1.4 Utilize “MIU Live Viewer” – Basic -  ………………………………………503.2 Utilize “PC-LESS Presentation” – Basic -  ……………………………………524. Utilize projector – Advanced -   ………………………………………………\
…544.1 Utilize “MIU Live Viewer” – Advanced -  ………………………………………544.1.1 Connect multiple PCs with one projector (Multiple PCs            connection)  ………………………………………………\
…………………544.2 Utilize “PC-LESS Presentation” – Advanced -  ………………………………564.2.1 Thumbnail display  ………………………………………………\
…………574.2.2 Display in full screen ………………………………………………\
………594.2.3 Slide show ………………………………………………\
……………………614.2.4 Directory display  ………………………………………………\
……………634.2.5 “PC-LESS Presentation” error message  ………………………………664.3 Playlist ………………………………………………\
………………………………674.4 Failure & Warning Alerts via E-mail ……………………………………………684.5 Projector management via SNMP ………………………………………………\
704.6 Controlling the Projector via Scheduling  ……………………………………714.7 e-SHOT (Still Image Transfer) Display …………………………………………744.8 Command Control via the Network  ……………………………………………755. Troubleshooting  ………………………………………………\
……………………806. Specifications  ………………………………………………\
………………………827. Warranty and After-sales ser vice ……………………………………………83

Contents 
						

							


Caution
Caution
[Restriction in terms of inserts or pulls memory card and wireless LAN card]
Do not pull out the memory card and the wireless card while the power is\
 on. The 
memory card can be pulled out only while the card access LED (Red) is off.
 CAUTION
nThe accompanying 802.11g wireless LAN card uses the 2.4GHz radio frequency band. You do not need a radio license to use this card, but you should be aware of the following:
lDO NOT USE NEAR THE FOLLOWING! • Microwave ovens • Industrial, scientific or medical devices • Designated low power radio stations • Premises radio stations Using the wireless LAN card near the above may result in radio interference, which in turn may result in a decrease in communication speed and even a complete loss of communication.
lDepending on the location where you attempt to use the wireless LAN card, there may be interference with the radio waves, which may result in a decrease in communication speed and even a complete loss of communication. In particular, please be aware that using the wireless LAN card in locations where there is reinforced steel, other metals and concrete may interfere with radio communication.
lAvailable Channels The wireless LAN card uses the 2.4GHz radio frequency band, but depending on the country or region you are in, you might be limited to the channels you can use. Please refer to the following table for confirming where and with what channels you may use the accompanying 802.11g wireless LAN card. Please consult with your dealer for countries not included in the table.
Country or RegionAvailable Channel
Japan  to  
USA  to  
Taiwan  to  
Canada  to  
UK, Spain, Germany, Italy, Austria, Switzerland, Belgium, Sweden, Netherlands, Portugal, Denmark, Finland, Greece, Norway, France, Ireland, Luxembourg, Iceland   to  
lYou may not bring the wireless LAN card into countries not listed above as there is a possibility that use of the wireless LAN card in those countries could lead to an infringement of established radio laws. 
						

							
4 
						

							


1. Main functions
1. Main functions
1.1 Live Mode (Project images from PC)
The main function of MIU (Multi Information processing Unit) is the Live Mode.
On Live Mode, the projector displays the screen appearing on the PC via network, 
supported by “MIU Live Viewer” (Fig.1.1.a).
The “MIU Live Viewer” captures PC screen image using dedicated firmware 
“MIU Live Viewer” and sends it to projector through wired LAN or wireless LAN 
connection. (Refer to section 3 and 5 in detail.)
Fig. 1.1.a “MIU Live Viewer” outlines (through wireless LAN connection)
Fig. 1.1.b “MIU Live Viewer”
One projector can be connected with up to 4 PCs using “MIU Live Viewer”.
 (Refer to section 4.1 in detail.) 
						

							


1. Main functions
Other main function is “PC-LESS Presentation”. (Fig. 1.2.a) “PC-LESS 
Presentation” has 4 kinds of display modes.
1.2  PC-LESS Presentation  
(Display the images stored in SD card/USB memor y.)
1)  Thumbnail display: Display many stored images in SD card and USB memory 
at once. (From now on, it is called “memory card” as SD card and USB memory 
combined.)
2) Display in full screen: Display 1 picture or moving picture in full screen.
3) Slide show: Switch images with set intervals.
4) Directory display: Display directories and files stored in memory card as listed.
[Supported memory cards]
  -   SD card
 -     USB memory (USB memory type, USB Hard Disk and USB card 
reader type)
Fig. 1.2.a “PC-LESS Presentation” outlines
“PC-LESS Presentation” can be controlled via keypad on the Projector or IR 
Remote (refer 4.2 Utilize PC-LESS Presentation -Advanced).
You can also use “Remote Control” as shown in fig. 1.2.b, which enables selecting 
images, switching pages and switching display modes. “Remote Control” also 
switches mode between “MIU Live Viewer” and “PC-LESS Presentation”.
6*7/$0#+.=5&?
+OCIG
;5064
5.+&5*19
2%.5524506#6+10/07
+0648#.5
5612
/1&106+/2.#;
56#46+OCIG
+OCIG
+OCIG
+OCIG
+OCIG
+OCIG
+OCIG
+OCIG
+OCIG
+OCIG
+OCIG:ˆ:‰:Š
:Œ:‹
:Ž
:ˆ:ˆ:ˆ:‰:ˆ:‡ 
						

							


1. Main functions
1.2  PC-LESS Presentation  
(Display the images stored in SD card/USB memory.) (Continued)
Fig. 1.2.b Remote Control
• There are following limitations for file name and directory name in  
PC-LESS Presentation.
(1)  The projector's language setting is Japanese. 
Only alpha-numeric characters and Japanese are supported.
(2)  The projector's language setting is not Japanese. 
Only alpha-numeric characters and Latin-1 characters are supported.
• Data cannot be read correctly depending on the type of USB hard disk, USB 
memory and USB card reader.
• When your USB hard disk can use a DC power supply adapter, please use it.
NOTE 
						

							
8

Followings are required for 1 projector and 1 PC connection. Multiple PC 
connection is described in section 4.1.
2. Equipment connection and network setting
2. Equipment connection and network setting
2.1 Required equipment preparation
Projector: 1 unit
PC: 1 set  (“MIU Live Viewer” installation is required for “MIU Live Viewer” usage.) 
IEEE802.g wireless LAN equipment is required. 
Depending on the type of wireless LAN card and PC you are using, the 
projector  may not be able to communicate properly with your PC, even 
if the PC you are using is equipped with built-in wireless LAN function. 
To eliminate communication problems, please procure a Wi-Fi certified 
wireless LAN card.
LAN cable (in case of wired connection): 1 piece * 1
SD Wireless Network Card (in case of wireless connection): 1 unit * 2
Memory card (in case of “PC-LESS Presentation” usage): 1 piece
* 1:  When a projector and a PC are connected, use CAT-5 LAN cable.
* 2:  Access point is required when wireless LAN connection is used as 
Infrastructure mode.
This section explains how to connect network using “One-Click-Communication” 
function. This function makes PC and projector network connection very easy 
without complicated settings like IP address and SSID.
*  This function cannot be used when multiple PCs or multiple projectors are 
connected.
*  The system of Windows2000 Professional Service Pack 4 or Windows XP  and 
the administrator authority are required to use “One-Click-Communication” 
function. (Administrator authority)
*  This function might not work depending on your used wireless LAN driver .
If so, setup the connection manually. (10, 16 and refer to the User Manuals for 
your PC and wireless equipment.)
2.2  Network connection using “One-Click-Communication” 
function
[Wired LAN connection]
1)  When projector network settings such as IP address and subnet mask are 
changed, need to return to the projector factory default Network settings.
qPress the menu button on remote control or the ▲/◄/►/▼ button on keypad. 
Then OSD menu will be displayed. If Easy Menu is displayed, change the 
menu to Advanced menu. 
						

							


2. Equipment connection and network setting
 2.2  Network connection using “One-Click-Communication” function 
(Continued)
ePress the Reset key on remote control. Then Reset Menu will be displayed.
rPress the ▲ button to reset the Network settings.
/+7
456%#0%.
• SSID, WEP KEY will be set to factory default settings.
• If you like to set these items, please set again from WEB (19).
NOTE
2)  Connect PC and projector using LAN cable to make it ready for communication.
* In case of connecting with existing network, contact your network administrator .
3)  Start up “MIU Live Viewer”. Window appears in fig. 2.2.a. (Refer to section 3.1 
how to use “MIU Live Viewer”.)
Fig. 2.2.a “MIU Live Viewer” initial window
/07=4)$?
2+%674
5.%6

+/#)
5672+0276
126+10/+7#5;/07
5%40
.+8/1&2%.5524506#6+105672G5*16+0(14/#6+10548+%
wSelect the MIU menu by using ▲/▼ button. 
						

							
10

2. Equipment connection and network setting
4)  Click “One-Click” button in fig. 2.2.a. Projector is found. Then capture start 
button  is pushed and real time display is started automatically.
 2.2   Network connection using “One-Click-Communication” function 
(Continued)
[Wireless LAN connection]
1)  When projector network settings such as IP address and subnet mask are 
changed, need to return to the projector factory default settings. (9)
2)  In case 802.11b/g wireless LAN device is built-in the PC, make the LAN valid 
and other network connections invalid. If wireless LAN device is not built in the 
PC, connect 802.11b/g wireless LAN device and install device driver to the PC. 
(Refer to the user guide for wireless LAN device details.)
3)  Start up “MIU Live Viewer”, then the window appears (shown in fig. 2.2.a).
4)  Click “One-Click” button as shown in fig. 2.2.a. Then projector will be found 
and the capture start button  is activated then real time display is started 
automatically.
When you need to set the original IP address and SSID other than factory default 
settings, need to set up network connection manually.
This section explains how to set up network connection manually.
2.3   Manual network connection setting – Wired LAN -
At first, connecting projector and PC with wired LAN connection to check PC 
setting and connection. Next section explains PC settings.
Connecting projector with network using LAN cable, and then set it ready to 
communicate with PC.
* Connecting with existing network, contact network administrator .
At last, turn on the projector. This is the end of Equipments connection.
2.3.1. Equipments connection