Dukane Imagepro 8776-W Lcd Projector Users Manual

							


3. How to use Projector software – Basics -
2)  Start Web Remote Control (refer to 2.6 Utilize Web Remote Control), and click 
“LIVE MODE” button on Web Remote Control to change projector mode to 
“MIU Live Viewer”. After changing, screen of the output monitor connected with 
projector turn all blue.
3) Perform following operations on “MIU Live Viewer”
(1)   Click “Find” button to search communication available projector. If any 
projector is not found at “Enable Device” tab, try search again after referring 
section   .  .
3.1 How to use “MIU Live Viewer” (Continued)
Display communication possible 
projector like this if available as a 
result of search.
Fig. 3.1.4.b. Projector research result display (1)
(2)  When communication available projector is found at 1), click the found 
projector to select
Click the projector line to connect. 
IP address appears in the upper 
column.
Fig. 3.1.4.c Projector research result display (2) 
						

							


3. How to use Projector software – Basics -
(3) Click Capture start button.
3.1 How to use “MIU Live Viewer” (Continued)
Fig. 3.1.4.d Start capturing
Based on the above operation, if captured picture of PC screen is displayed real 
time on monitor connected with projector, it is succeeded. Much easier to connect 
if you utilize “One-Click-Communication” function. (Refer to section 2.2.)
This is basic usage. Refer to section 4.1 for further explanation of advanced MIU 
Live Viewer usage.
Explain basics of how to utilize “PC-LESS Presentation”.
1)  Save JPEG picture files into root directory in SD card or USB Memory . Insert 
SD card into SD slot on projector or insert USB memory into AUX I/O slot on 
projector (Inserting an SD card and USB memory of the User's Manual - Operating 
Guide).
2)  Connecting as network refer to section 3 and start the Web Remote Control. 
3)  Click “THUMBNAIL” button on the Web Remote Control to change projector 
mode to “PC-LESS Presentation”. Then thumbnail appears.
To remove the SD card or USB memory,
4)  Be sure to perform the REMOVE procedure using the SERVICE item in the 
MIU menu (MIU Menu of the User's Manual - Operating Guide). When an error 
dialog appears in the procedure, please re-perform the procedure after waiting 
for a while. 
5)  When you remove the SD wireless network card, be sure to turn the projector of f.
6)  Remove the SD card or USB Memory. For removing the SD card, remove the 
SD card slot cover before, and put the cover back after.
3.2 Utilize “PC-LESS Presentation” – Basic -  
						

							


3. How to use Projector software – Basics -
You can also activate “PC-LESS Presentation” from the OSD Menu.
1)  Open the OSD Menu from the Menu button on the remote control or ▲/◄/►/▼ 
button on Keypad.
2)  Select “PC-LESS Presentation” on the MIU Menu. And press the Enter button 
on the remote control or ► button on Keypad. Then PC-LESS PRESENTATION 
Menu appears.
Fig. 3.2.a Thumbnail display
3)  Select THUMBNAIL on PC-LESS PRESENTATION Menu. And press the Enter 
button on remote control or ► button on Keypad. Then thumbnail appears.
• Do not pull out memory card while file is accessed.
• SDHC(4GB etc) SD memory is not supported. UP to 2GB.
• Some SD memories and/or USB memories will not work correctly.
• Security USB memory is not supported.
Caution
3.2 Utilize “PC-LESS Presentation” –Basic - (Continued)
If thumbnail appears by above operation, it is succeeded. (Fig.3.2.a)  This is basic 
usage. There are varieties of usage for “PC-LESS Presentation”. Refer to section 
4.2 for further detailed explanation.
6*7/$0#+.=5&?
+OCIG
;5064
5.+&5*19
2%.5524506#6+10/07
+0648#.55612
/1&106+/2.#;
56#46+OCIG
+OCIG
+OCIG
+OCIG
+OCIG
+OCIG
+OCIG
+OCIG
+OCIG
+OCIG
+OCIG:ˆ:‰:Š
:Œ:‹
:Ž
:ˆ:ˆ:ˆ:‰:ˆ:‡
/07=4)$?
2+%674
5.%6

+/#)
5672+0276
126+10/+7#5;/07
5%40
.+8/1&2%.5524506#6+105672G5*16+0(14/#6+10548+%
2%.5524506#6+10
6*7/$0#+.5.+&5*19&+4%64;&+52.#;5+
						

							
54

4. Utilize projector – Advanced -
4. Utilize projector – Advanced -
This section explains how to connect multiple PCs.
4.1. Utilize “MIU Live Viewer” – Advanced -
4.1.1.   Connect multiple PCs with one projector (Multiple PCs 
connection)
A projector can be connected with up to 4 PCs to display multiple windows.
Fig. 4.1.1.a Multiple PCs connection outline
Followings are required for multiple PCs connection.
-  From 2 to 4 PCs (“MIU Live Viewer” installation is required to all 
PCs to connect.)
-  Projector: 1 unit
-  Straight LAN cable: Required qty*
-  Ethernet hub
*   It is required to make all wireless PCs enabling wireless communication when 
doing multiple PCs connection as wireless LAN connection. SD-Link1 1g card for 
projector is required. If it is communicated by Infrastructure mode, access point 
is necessary. (16)
CR/PRCB/PBAUDIO IN2AUDIO IN1RGB IN1RGB IN2SD CARDAUX  I/ODC  5V  0.5ALANCONTROLRGB OUTAUDIO OUTUSBVIDEOS-VIDEOAC  IN
1
11
22
33
44
2
3 4 
						

							


4. Utilize projector – Advanced -
4.1. Utilize “MIU Live Viewer” – Advanced - (Continued)
[Connection]
1)  Connect all PCs and projector using LAN cables and hub as shown in fig. 
4.1.1.a. Connect projector and output monitor with RGB cable.
2)  Start up “MIU Live Viewer” in each PC. Check the IP address in PCs and 
confirm xxx of [192.168.1.xxx] in IP address is set different value in each PC.
3)  Click “Find” button in “MIU Live Viewer” and search projector.
4)  When projector is found, click “Option” button in “MIU Live Viewer”. Then open 
“General” tub and select the number of PCs to connect as MultiPC Mode.  After 
selecting, click “Close” button.
5) Click Capturing Start button.
6) Repeat from 3) to 5) to all PCs.
* Display screen priority
In case of multiple PCs connection, priority is decided automatically comparing 
when each PC is connected. In each mode, priority is as shown in fig. 4.1.1.b. 
(Smaller number is prioritized.)
Fig. 4.1.1.b Priority in each mode
Detailed conditions and specifications for priority are as follows.
a) The priority is high the PC that connects later.
b)  When Multi PC Mode (2 to 4 PCs) is changed to 1 PC, changed 1 PC has 
highest priority.
c)  Multi PC Mode can be changed settings freely even the PC is communicating.
d)   When the lower number than connected PCs is selected, lower priority PC 
screens are not displayed, but connections with projector are kept. 
When more than 5 PCs are connected with projector, lower priority PC connection 
is disconnected.
  

 
 
2%2%U2%U2%U
• When Multi PC is selected, if the screen resolution on one of PCs is 
changed, the PC will be given the top priority, so the mode (1 to 4PCs) set on 
the PC will be effective on the projector.
• On Multi PC Mode, actual image resolution of each screen is 1/4 of the 
original, then small letters or lines might be hard to be illegible. 
It is recommended to use letters as large as possible. Or try manual H.Phase 
adjustment which might improve image quality. 
NOTE 
						

							


“PC-LESS Presentation” reads image data from memory cards inserted into SD or 
USB slot and perform followings.
SD Memory and SD Wireless card can not be inserted at the same time.
- Thumbnail display (Section 4.2.1)
- Display in full screen (Section 4.2.2)
- Slide show (Section 4.2.3)
- Directory display (Section 4.2.4)
4.2 Utilize “PC-LESS Presentation” – Advanced -
Fig. 4.2.a Thumbnail displayFig. 4.2.b Display in full screen
Fig. 4.2.c Slide showFig. 4.2.d Directory display
4. Utilize projector – Advanced -
6*7/$0#+.=5&?
+OCIG
;5064
5.+&5*19
2%.5524506#6+10/07
+0648#.55612
/1&106+/2.#;
56#46+OCIG
+OCIG
+OCIG
+OCIG
+OCIG
+OCIG
+OCIG
+OCIG
+OCIG
+OCIG
+OCIG:ˆ:‰:Š
:Œ:‹
:Ž
:ˆ:ˆ:ˆ:‰:ˆ:‡ 
						

							


6*7/$0#+.=5&?
+OCIG
;5064
5.+&5*19
2%.5524506#6+10/07
+0648#.55612
/1&106+/2.#;
56#46+OCIG
+OCIG
+OCIG
+OCIG
+OCIG
+OCIG
+OCIG
+OCIG
+OCIG
+OCIG
+OCIG:ˆ:‰:Š
:Œ:‹
:Ž
:ˆ:ˆ:ˆ:‰:ˆ:‡

Following picture and movie files can be displayed.
• JPEG (.jpeg, .jpg) * Progressive is not corresponded.
• BMP (.bmp)
• PNG (.png)
• MPEG4 (.mp4) *   Supported bit resolution rate is less than 1Mbps in Simple 
Profile. 
Supported resolution is less than VGA. 
 Supported Audio format is only AAC.
4.2.1 Thumbnail display
Fig.4.2.1 shows thumbnail display. Click [THUMBNAIL] button in the Web Remote 
Control to display menu on the screen in order to make thumbnail display . 
You can also display thumbnail by remote control or keypad (53).
4.2 Utilize “PC-LESS Presentation” – Advanced - (Continued)
Fig. 4.2.1. Thumbnail display
Thumbnail Menu
Thumbnail Images
Focused image
4. Utilize projector – Advanced - 
						

							
58

4.2 Utilize “PC-LESS Presentation” – Advanced - (Continued)
Following operations can be accessible while thumbnail is displayed.
* These operations are not accessible while projector OSD menu is displayed.
• Thumbnail display shows 12 pictures in 1 page as maximum.
• It is not possible to change the input port by INPUT button when THUMBNAIL, 
SLIDE SHOW, or DIRECTORY is displayed.
• Displays the projector Menu before changing the input port .
• Select the right edge images and press the ► button, then thumbnail menu 
will be selected.
• Some error Icons will be displayed in thumbnail.
NOTE
This file seems to be broken or not supported format.
This file exists only in Playlist (67), but does not exist anywhere.
▲/◄/►/▼Remote control/KeypadMove cursor.
PAGE UP  PAGE DOWN
Remote controlSwitch pages.
ENTER
INPUT
Remote control
KeypadDisplay selected image in full screen.
MENURemote controlDisplays PC-LESS PRESENTATION Menu.
4. Utilize projector – Advanced - 
						

							


4.2.2 Display in full screen
Full screen display (fig.4.2.2) shows a full display image on the PC. To make Full-
screen display, click [MENU] button in the Web Remote Control menu on the 
screen. When select [PC-LESS Presentation], then [Thumbnail] from the menu, 
click [ENTER] so that moves to be full-screen display.
Fig.4.2.2 Full-screen Display
4.2 Utilize “PC-LESS Presentation” – Advanced - (Continued)
While displaying in full screen, following operation can be accessible from the 
Web Remote Control.
* These operations are not accessible while projector OSD menu is displayed.
• It is not possible to change the input port by INPUT button of keypad 
when displaying the THUMBNAIL, SLIDE SHOW, or DIRECTORY.
• Displays the projector Menu before changing the input port.
• Image might not be displayed properly at the beginning or end of MP4 file 
playback. 
NOTE
◄/►or▲/▼(Selected on KEY  CONFIG. MENU 60)
• Rotate image 90 degrees clockwise or otherwise. Once image is rotated, it keeps the display image even though it is switched. (Thumbnail or slide show display) To return the original, rotating the image 360 degrees or erase play list in memory card. (Refer to section 4.3)• Moving the slide forward or backward.
ENTER
INPUT
Remote control
KeypadDisplaying thumbnail.
MENURemote controlDisplays PC-LESS PRESENTATION Menu.
Full-screen Display
4. Utilize projector – Advanced - 
						

							
60

4.2 Utilize “PC-LESS Presentation” – Advanced - (Continued)
You can display the image file with your desired size.
1) Select the DISPLAY SIZE in PC-LESS PRESENTATION Menu.
2)  Press the Enter button on the remote  
control or ► button on the Keypad.
3) Then DISPLAY SIZE menu appears.
4) Select your desired DISPLAY SIZE.
• REAL :   Displays the image at original size. 
Displays the image at the center of screen if original size is smaller 
than the screen size. 
Displays only center of the image if original size is larger than the 
screen size.
• NORMAL :   Displays the image for the maximum size on the screen, and 
keeps original aspect.
• FULL :  Displays the image at the full size screen. 
Original aspect will be changed to full size display.
The animation file is always played at VGA mode if resolution is larger than VGA.
The animation file is always played at the center of screen if resolution is smaller 
than VGA.
2%.5524506#6+10
6*7/$0#+.
5.+&5*19
&+4%64;&+52.#;5+