Dukane Imagepro 8776-W Lcd Projector Users Manual



3. How to use Projector software – Basics -
2)  Start Web Remote Control (refer to 2.6 Utilize Web Remote Control), and click 
“LIVE MODE” button on Web Remote Control to change projector mode to 
“MIU Live Viewer”. After changing, screen of the output monitor connected with 
projector turn all blue.
3) Perform following operations on “MIU Live Viewer”
(1)   Click “Find” button to search communication available projector. If any 
projector is not found at “Enable Device” tab, try search...



3. How to use Projector software – Basics -
(3) Click Capture start button.
3.1 How to use “MIU Live Viewer” (Continued)
Fig. 3.1.4.d Start capturing
Based on the above operation, if captured picture of PC screen is displayed real 
time on monitor connected with projector, it is succeeded. Much easier to connect 
if you utilize “One-Click-Communication” function. (Refer to section 2.2.)
This is basic usage. Refer to section 4.1 for further explanation of advanced MIU 
Live Viewer usage....



3. How to use Projector software – Basics -
You can also activate “PC-LESS Presentation” from the OSD Menu.
1)  Open the OSD Menu from the Menu button on the remote control or ▲/◄/►/▼ 
button on Keypad.
2)  Select “PC-LESS Presentation” on the MIU Menu. And press the Enter button 
on the remote control or ► button on Keypad. Then PC-LESS PRESENTATION 
Menu appears.
Fig. 3.2.a Thumbnail display
3)  Select THUMBNAIL on PC-LESS PRESENTATION Menu. And press the Enter 
button on remote control or...

54

4. Utilize projector – Advanced -
4. Utilize projector – Advanced -
This section explains how to connect multiple PCs.
4.1. Utilize “MIU Live Viewer” – Advanced -
4.1.1.   Connect multiple PCs with one projector (Multiple PCs 
connection)
A projector can be connected with up to 4 PCs to display multiple windows.
Fig. 4.1.1.a Multiple PCs connection outline
Followings are required for multiple PCs connection.
-  From 2 to 4 PCs (“MIU Live Viewer” installation is required to all 
PCs to connect.)
-...



4. Utilize projector – Advanced -
4.1. Utilize “MIU Live Viewer” – Advanced - (Continued)
[Connection]
1)  Connect all PCs and projector using LAN cables and hub as shown in fig. 
4.1.1.a. Connect projector and output monitor with RGB cable.
2)  Start up “MIU Live Viewer” in each PC. Check the IP address in PCs and 
confirm xxx of [192.168.1.xxx] in IP address is set different value in each PC.
3)  Click “Find” button in “MIU Live Viewer” and search projector.
4)  When projector is found,...



“PC-LESS Presentation” reads image data from memory cards inserted into SD or 
USB slot and perform followings.
SD Memory and SD Wireless card can not be inserted at the same time.
- Thumbnail display (Section 4.2.1)
- Display in full screen (Section 4.2.2)
- Slide show (Section 4.2.3)
- Directory display (Section 4.2.4)
4.2 Utilize “PC-LESS Presentation” – Advanced -
Fig. 4.2.a Thumbnail displayFig. 4.2.b Display in full screen
Fig. 4.2.c Slide showFig. 4.2.d Directory display
4. Utilize...



6*7/$0#+.=5&?
+OCIG
;5064
5.+&5*19
2%.5524506#6+10/07
+0648#.55612
/1&106+/2.#;
56#46+OCIG
+OCIG
+OCIG
+OCIG
+OCIG
+OCIG
+OCIG
+OCIG
+OCIG
+OCIG
+OCIG:ˆ:‰:Š
:Œ:‹
:Ž
:ˆ:ˆ:ˆ:‰:ˆ:‡

Following picture and movie files can be displayed.
• JPEG (.jpeg, .jpg) * Progressive is not corresponded.
• BMP (.bmp)
• PNG (.png)
• MPEG4 (.mp4) *   Supported bit resolution rate is less than 1Mbps in Simple...

58

4.2 Utilize “PC-LESS Presentation” – Advanced - (Continued)
Following operations can be accessible while thumbnail is displayed.
* These operations are not accessible while projector OSD menu is displayed.
• Thumbnail display shows 12 pictures in 1 page as maximum.
• It is not possible to change the input port by INPUT button when THUMBNAIL, 
SLIDE SHOW, or DIRECTORY is displayed.
• Displays the projector Menu before changing the input port .
• Select the right edge images and press the ► button,...



4.2.2 Display in full screen
Full screen display (fig.4.2.2) shows a full display image on the PC. To make Full-
screen display, click [MENU] button in the Web Remote Control menu on the 
screen. When select [PC-LESS Presentation], then [Thumbnail] from the menu, 
click [ENTER] so that moves to be full-screen display.
Fig.4.2.2 Full-screen Display
4.2 Utilize “PC-LESS Presentation” – Advanced - (Continued)
While displaying in full screen, following operation can be accessible from the 
Web...

60

4.2 Utilize “PC-LESS Presentation” – Advanced - (Continued)
You can display the image file with your desired size.
1) Select the DISPLAY SIZE in PC-LESS PRESENTATION Menu.
2)  Press the Enter button on the remote  
control or ► button on the Keypad.
3) Then DISPLAY SIZE menu appears.
4) Select your desired DISPLAY SIZE.
• REAL :   Displays the image at original size. 
Displays the image at the center of screen if original size is smaller 
than the screen size. 
Displays only center of the image if...