Dukane Imagepro 8776-W Lcd Projector Users Manual



2. Equipment connection and network setting
This is the explanation of network connection settings for Windows XP and 
Internet Explorer.
1) Log on to Windows XP as administrator authority. (*)
2) Open “Control Panel” from “Start” menu.
3) Open “Network and Internet Connections” in “Control Panel”. (Fig. 2.3.2.a)
* Administrator authority is the account, which can access to all functions.
2.3.2. Network settings
2.3 Manual network connection setting – In case of wired LAN - (Cont\
inued)
4)...



2. Equipment connection and network setting
2.3 Manual network connection setting – In case of wired LAN - (Cont\
inued)
5)  When more than 2 usable network devices exist, make only one device “valid” 
that you want to use and the rest of devices “invalid”. (In this case, “Local  Area 
Connection” is selected.)
6)  Open “Local Area Connection Properties” window you use for network device.
    (Fig. 2.3.2.c)
Fig. 2.3.2.c “Local Area Connection Properties” window
7)  Set used protocol as...



2. Equipment connection and network setting
2.3 Manual network connection setting – In case of wired LAN - (Cont\
inued)
[About IP address]
Network address portion of PC IP address should be common with projector’s 
one but the PC total IP address should not be overlapped with other networked 
equipments.
For example, projector initial settings are as follows.
IP address: 192.168.1.10
Subnet mask: 255.255.255.0
Therefore, specify PC IP address as follows.
IP address: 192.168.1.xxx (xxx shows...

14

2.3 Manual network connection setting – In case of wired LAN - (Cont\
inued)
2. Equipment connection and network setting
1)  Click “Internet Options” in “Network and Internet Connections” window  
(Fig. 2.3.3.a) to open “Internet Properties” window. (Fig. 2.3.3.b)
2.3.3 “Internet Option” setting
Fig. 2.3.3.a “Network and Internet Connections” window
Click
Fig. 2.3.3.b “Internet Properties” window
2)  Click “Connections” tab and then click “LAN settings” button to open “Local 
Area Network (LAN)...



2. Equipment connection and network setting
2.3 Manual network connection setting – In case of wired LAN - (Cont\
inued)
Fig. 2.3.3.c “Local Area Network (LAN) Settings” window
3)  Uncheck all boxes in “Local Area Network (LAN) Settings” window. (Fig. 2.3.3.c)
Check PC and projector are connected properly here. If it is not connected, check 
cable connections and settings are properly or not.
1)  Start browser in PC and specify following URL, then click “Go” button.
URL: http://(Projector IP...



2. Equipment connection and network setting
By installing SD-Link11g card, PC and wireless LAN are able to communicate in 
both Ad-Hoc and Infrastructure modes.
How to set up wireless LAN connection manually.
2.4  Manual network connection setting – For wireless LAN
2.4.1 Preparation for wireless LAN connection
Fig. 2.4.1.a Without access point communication (Ad-Hoc)
Fig. 2.4.1.b With access point communication (Infrastructure)
*  Ad-Hoc is one of the wireless LAN communication methods...



2. Equipment connection and network setting
2.4  Manual network connection setting – For wireless LAN (Continued)
Using wireless LAN utility for Windows XP standard.
Wireless LAN initial settings for the projector is as follows.
Connection Control   : Ad-Hoc
SSID  : wireless
Channel  : 1ch
Encryption rating  : None
Communication speed  : AUTO
IP address  : 192.168.1.10
*  You can change these settings as you want. Use configuration utility or menu to 
change. (Refer to section 2.5)
1)   Open...

18

2. Equipment connection and network setting
2.4  Manual network connection setting – For wireless LAN (Continued)
4)  Set used protocol as “TCP/IP” and open TCP/IP property. Set IP address and 
other settings as same as wired LAN connection set up. (12)
5)  Open “Wireless Networks” tab. (Fig. 2.4.2.c)
Fig. 2.4.2.c “Wireless Network Connection Properties” window (2)
Fig. 2.4.2.d “Wireless network Properties” window
6)  Add check mark for “Use Windows to configure my wireless network settings” 
in...



2. Equipment connection and network setting
2.4  Manual network connection setting – For wireless LAN (Continued)
8)  Set each item as follows. 
Network name (SSID): wireless 
Data encryption: Invalid (Default setting is invalid.)
*  This explanation meets the projector default setting. If access point is used or 
data encryption is used, if needs to change settings properly. Refer to PC or 
wireless LAN device user guide for detailed information.
*   If using the existing network via access...

20

When configuring or controlling the projector via a web browser, an ID and 
password are required. There are two types of IDs, Administrator IDs and User 
IDs. The following chart describes the differences between user and administrator 
IDs.
Below are the factory default settings for administrator IDs, user IDs and 
passwords.
ItemDescriptionAdministrator IDUser ID
Network InformationDisplays the projector’s current network configuration settings.√√
Network SettingsDisplays and configures network...