Dukane Imagepro 8776-W Lcd Projector Users Manual



Projector
8776-W
User’s Manual – Network Functions Section
This section is only intended to explain Network Functions.
• The information in this manual is subject to change without notice.
• The manufacturer assumes no responsibility for any errors that may appear in 
this manual.
• The reproduction, transfer or copy of all or any part of this document is not 
permitted without express written consent.
NOTE
Trademark acknowledgment
 • Windows is a registered trademark of Microsoft Corporation....



Contents
Caution ………………………………………………\
……………………………………31. Main Functions ………………………………………………\
………………………51.1 Live Mode  ………………………………………………\
…………………………51.2 PC-LESS Presentation  ………………………………………………\
…………62. Equipment connection and network setting  ……………………………82.1 Required equipment preparation ………………………………………………\
82.2 Network connection using “One-Click-Communication”        function  ………………………………………………\
……………………………82.3 Manual network connection setting – Wired LAN -   ………………………102.3.1 Equipments...



Caution
Caution
[Restriction in terms of inserts or pulls memory card and wireless LAN card]
Do not pull out the memory card and the wireless card while the power is\
 on. The 
memory card can be pulled out only while the card access LED (Red) is off.
 CAUTION
nThe accompanying 802.11g wireless LAN card uses the 2.4GHz radio frequency band. You do not need a radio license to use this card, but you should be aware of the following:
lDO NOT USE NEAR THE FOLLOWING! • Microwave ovens •...

4 



1. Main functions
1. Main functions
1.1 Live Mode (Project images from PC)
The main function of MIU (Multi Information processing Unit) is the Live Mode.
On Live Mode, the projector displays the screen appearing on the PC via network, 
supported by “MIU Live Viewer” (Fig.1.1.a).
The “MIU Live Viewer” captures PC screen image using dedicated firmware 
“MIU Live Viewer” and sends it to projector through wired LAN or wireless LAN 
connection. (Refer to section 3 and 5 in detail.)
Fig. 1.1.a “MIU...



1. Main functions
Other main function is “PC-LESS Presentation”. (Fig. 1.2.a) “PC-LESS 
Presentation” has 4 kinds of display modes.
1.2  PC-LESS Presentation  
(Display the images stored in SD card/USB memor y.)
1)  Thumbnail display: Display many stored images in SD card and USB memory 
at once. (From now on, it is called “memory card” as SD card and USB memory 
combined.)
2) Display in full screen: Display 1 picture or moving picture in full screen.
3) Slide show: Switch images with set...



1. Main functions
1.2  PC-LESS Presentation  
(Display the images stored in SD card/USB memory.) (Continued)
Fig. 1.2.b Remote Control
• There are following limitations for file name and directory name in  
PC-LESS Presentation.
(1)  The projector's language setting is Japanese. 
Only alpha-numeric characters and Japanese are supported.
(2)  The projector's language setting is not Japanese. 
Only alpha-numeric characters and Latin-1 characters are supported.
• Data cannot be read...

8

Followings are required for 1 projector and 1 PC connection. Multiple PC 
connection is described in section 4.1.
2. Equipment connection and network setting
2. Equipment connection and network setting
2.1 Required equipment preparation
Projector: 1 unit
PC: 1 set  (“MIU Live Viewer” installation is required for “MIU Live Viewer” usage.) 
IEEE802.g wireless LAN equipment is required. 
Depending on the type of wireless LAN card and PC you are using, the 
projector  may not be able to communicate...



2. Equipment connection and network setting
 2.2  Network connection using “One-Click-Communication” function 
(Continued)
ePress the Reset key on remote control. Then Reset Menu will be displayed.
rPress the ▲ button to reset the Network settings.
/+7
456%#0%.
• SSID, WEP KEY will be set to factory default settings.
• If you like to set these items, please set again from WEB (19).
NOTE
2)  Connect PC and projector using LAN cable to make it ready for communication.
* In case of connecting with...

10

2. Equipment connection and network setting
4)  Click “One-Click” button in fig. 2.2.a. Projector is found. Then capture start 
button  is pushed and real time display is started automatically.
 2.2   Network connection using “One-Click-Communication” function 
(Continued)
[Wireless LAN connection]
1)  When projector network settings such as IP address and subnet mask are 
changed, need to return to the projector factory default settings. (9)
2)  In case 802.11b/g wireless LAN device is built-in...