Dukane Imagepro 8776-W Lcd Projector Users Manual

49

ItemDescription
SECURITY
3.1-3   Input a 4 part PIN Code using the ▲/▼/◄/►/RGB and INPUT buttons.A CONFIRMATION BOX will appear. Reenter the same PIN Code. This will complete the PIN Code registration.NOTE: If there is no key input for about 55 seconds while the PIN BOX or the CONFIRMATION BOX are displayed the menu will close. If necessary repeat 
the process from 3.-.
Afterwards, anytime the projector is restarted after the power switch is turned off the PIN BOX will be displayed. Enter...

50

ItemDescription
SECURITY
4. Using the Transition Detector Function
While the Transition Detector function is ON, when power switch is started to supply to the projector, it might react as below.• Transition Detector alarm shown below might appear on screen, if the projector has been moved or re-installed.• Transition Detector alarm might appear on screen, if the MIRROR setting has been changed.• Keystone adjustment feature has been prohibited as long as the Transition Detector function is ON.
4.1...

5

ItemDescription
SECURITY
4.3 Setting the Transition Detector off
4.3-  Follow the procedure in 4.- to display the Transition Detector on/off menu.
4.3-   Select TURN OFF to display the ENTER PASSWORD BOX (large). 
Enter the registered PASSWORD and the screen will return to the Transition Detector on/off menu. If an incorrect PASSWORD is input the menu will close. If necessary repeat 
the process from 4.3-.
4.4 If you have forgotten your PASSWORD
4.4-  Follow the...

5

ItemDescription
LIVE MODE
Display the screen appearing on the PC via Network.Press the ► button or ENTER button to display the LIVE MODE Menu.See [LIVE MODE] in [User’s Manual – Network Functions] for more information.
PC-LESSPRESENTATION
Make a presentation without a PC.The data in the memory card are displayed.Press the ► button or ENTER button to display  the PC-LESS PRESENTATION Menu.See [PC-LESS PRESENTATION] in [User’s  Manual - Network Functions] for more information.
MIU Menu...

53

ItemOperation
e-SHOT 
e-SHOT display : Use the ▲/▼ buttons to select an item and the ► or ENTER buttons to display the image.
Image
 
Image
 Image3 
Image4
File names of registered images are 
displayed by 6 characters or less. 
Example: DEMONSTRATION-0 Once an image is displayed, you can use the ▲/▼ buttons to page through the images. Use the ◄ or ESC buttons to return to the menu.Pressing the RESET button on the remote control while an image is being displayed will display the...

54

ItemDescription
SETUP
IP ADDRESS
Input the IP ADDRESS : 
Use the ▲/▼/◄/► buttons to enter the IP ADDRESS. This function is available as long 
as DHCP is set to “TURN OFF”.
~Note~ IP ADDRESS is a number which identifies this projector on the network. You cannot have two devices with the same IP ADDRESS on the same network.
SUBNET MASK
Input the SUBNET MASK : Use the buttons ▲/▼/◄/► to enter the same SUBNET MASK of your PC. This function is available as long as DHCP is set to “TURN OFF”.
DEFAULT...

55

ItemDescription
SETUP
MODESelect the communication connection control method to use between the PC and projector. Match to your PC’s settings.Use the ▲/▼ buttons to select the MODE to be used.
ADHOC ó INFRASTRUCTURE
CHSelect the channel when using a wireless LAN connection.
(Channels  to  are available)
*The available channels would be various depending on a country. In addition, wireless LAN card might be required due to the standard.
ENCRYPTIONSelect the encrypting method.Use the...

56
MIU Menu
ItemDescription
INFORMATION
INFORMATION display : Use the ► or ENTER buttons to view network information and confirm settings.See [INFORMATION] in [User’s Manual] – Network Functions] for more information.
~Note~• Only the first 16 characters of the projector name are displayed.• Only the first 32 characters of the SSID are displayed.• When the voltage level of battery for built in clock decreases, set tim\
e may become incorrect even though accurate date and time are input.Replace a battery...

57
Maintenance
Maintenance
Lamp
 WARNING HIGH VOLTAGE HIGH TEMPERATURE HIGH PRESSURE
►The  projector  uses  a  high-pressure  mercury  glass  lamp.  The  lamp  can break 
with  a  loud  bang,  or  burn  out,  if  jolted  or  scratched,  handled  while  hot,  or  worn over  time.  Note  that  each  lamp  has  a  different  lifetime,  and  some  may  burst  or burn  out  soon  after  you  start  using  them.  In  addition,  when  the  bulb  bursts,  it  is possible  for shards  of  glass  to  fly  into...

58
Lamp (continued)
A lamp has a \
finite producty
life. Using \
the lamp for \
long periods y
Rf time could \
cause the pictures darker or the color tone poor. Note that each lamp has a 
different lifetime, and some may burst or burn out soon after you start usi\
ng them. 
Preparation of a new lamp and early replacement are recommended. 
To prepare a new lamp, contact your dealer and tell the lamp type number.Type number =  456-8776.
. Turn the projector off, and unplug the power cord. Allow the...