Dukane Imagepro 8776-W Lcd Projector Users Manual

9
Power on/off
Power on/off
WARNING  ►When the power is on, a strong light is emitted. Do not look into 
the lens of projector. Also do not peep at the inside of projector through a hole.
Turning on the power
. Make sure that the power cord is firmly and correctly connected to the projector and the outlet.
. Remove the lens cover, and set the power switch to the ON position.  The power indicator will light up in steady orange. Then wait several seconds because the buttons may not function...

0

Operating
Operating
Adjusting the volume
. Press the VOLUME button on the remote control. 
A dialog will appear on the screen to aid you in adjusting the volume.
. Use the cursor buttons ▲/▼ to adjust the volume.
To close the dialog and complete the operation, press the 
VOLUME button again. Even if you don’t do anything, the 
dialog will automatically disappear after a few seconds. 
Temporarily muting the sound
. Press the MUTE button on the remote control.  
A dialog will appear...



Operating
Adjusting the zoom and focus
. Use the zoom ring to adjust the screen size.  
. Use the focus ring to focus the picture.
Selecting an aspect ratio 
. Press the ASPECT button on the remote control.   
Each time you press the button, the projector switches the mode for aspe\
ct 
ratio in turn. 
 For an RGB and MIU signal
NORMAL  4:3  6:9  SMALL 
  
 For a video signal, s-video signal or component video signal
4:3  6:9  4:9  SMALL 
  
 For a no...



Operating
Using the automatic adjustment feature
. Press the AUTO button on the remote control.  
 For an RGB signal 
The vertical position, the horizontal position, the horizontal 
phase and the horizontal size will be automatically adjusted. 
And the aspect ratio will be automatically set to default. Make sure tha\
t the 
application window is set to its maximum size prior to attempting to use\
 this 
feature. A dark picture may still be incorrectly adjusted. Use a bright picture...

3

Using the magnify feature
. Press the ON button of MAGNIFY on the remote control.   
The “MAGNIFY” indication will appear on the screen 
(although the indication will disappear in several seconds with 
no operation), and the projector will enter the MAGNIFY mode.
. Use the cursor buttons ▲/▼ to adjust the zoom level. 
To move the zoom area, press the POSITION button in the MAGNIFY mode, 
then use the cursor buttons ▲/▼/◄/► to move the area. And to finalize the 
zoom area, press the...

4

Freezing the screen
. Press the FREEZE button on the remote control.  
The “FREEZE” indication will appear on the screen, and the 
projector will enter the FREEZE mode.
To exit the FREEZE mode and restore the screen to normal, 
press the FREEZE button again. 
● The projector automatically exits the FREEZE mode when the input signal 
changes, or when one of the projector’s buttons or the remote control buttons 
of STANDBY/ON, SEARCH, RGB, VIDEO, BLANK, AUTO, ASPECT, VOLUME, 
MUTE, KEYSTONE,...

5

Operating
Operating the computer screen
CAUTION  ►Mistaken use of the mouse/keyboard control could damage 
your equipment. 
• While using this function, please connect only with a computer. 
• Before connecting, read the manuals of the computer you will connec\
t. 
NOTE  • It may not be possible to control notebook PC, and other computer\
s with 
built-in pointing device (e.g. track ball), using this remote control.\
 In this case, before 
connecting go into BIOS (system setup) and select...

6
Multifunctional settings
Multifunctional settings
Using the menu function
This projector has the following menus: PICTURE, IMAGE, INPUT, SETUP, SCREEN, 
OPTION, MIU, and EASY MENU. EASY MENU consists of functions often used, and 
the other menus are classified into each purpose. Each of these menus is operated 
using the same methods. The basic operations of these menus are as follows.
. Press the MENU button on the remote control or one of 
the cursor buttons on the projector.   
The...

7
EASY Menu
EASY Menu
ItemDescription
ASPECTUsing the buttons ◄/► switches the mode for aspect ratio. See the ASPECT item in the IMAGE menu (32).
AUTO KEYSTONE EXECUTE
Using the button ► executes the auto keystone function. See the AUTO KEYSTONE EXECUTE item in the SETUP menu (37).This function will be unavailable when Transition Detector is on (50).
KEYSTONEUsing the buttons ◄/► corrects the keystone distortion.See the item KEYSTONE of section SETUP menu. (37)This function will be unavailable...

8

EASY Menu
ItemDescription
CONTRASTUsing the buttons ◄/► adjusts the contrast.See the CONTRAST item in the PICTURE menu (29).
COLORUsing the buttons ◄/► adjusts the strength of whole color.See the COLOR item in the PICTURE menu (30).
TINTUsing the buttons ◄/► adjusts the tint.See the TINT item in the PICTURE menu (30).
SHARPNESS
Using the buttons ◄/► adjusts the sharpness.See the SHARPNESS item in the PICTURE menu (30).• There may be some noise when an adjustment is made. This is not a...