Dukane Imagepro 8776-W Lcd Projector Users Manual
Here you can view all the pages of manual Dukane Imagepro 8776-W Lcd Projector Users Manual. The Dukane manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 11
9 Arrangement Refer to the illustrations and tables below to determine the screen size and projection distance. The values shown in the table are calculated for a full size screen: 04×768 (a) The screen size (diagonal) (b) Distance from the projector to the screen (±0%) (c) The height of the screen (±0%) Setting up 4:3 (a) 6:9 (a) (c) up (b) (c) down (a) Screen size[inch (m)] 4 : 3 screen6 : 9 screen(b) Projection distance [m (inch)](c) Screen height[cm (inch)](b)...
Page 12
0 Adjusting the projector's elevator CAUTION ►If you press the elevator button without holding the projector, the projector might crash down, overturn, smash your fingers and possibly result in malfunction. To prevent damaging the projector and injuring yourself, always hold the projector whenever using the elevator buttons to adjust \ the elevator feet. ►Do not incline the projector rightward or leftward. Also do not incline it backward or forward exceeding 30 degrees. Exceeding these...
Page 13
Setting up Using the Security Bar WARNING ►Do not use the security bar to prevent the projector from falling. Dropping or knocking over the projector may cause damage or inj\ ury. A commercial anti-theft chain or wire can be attached to the security bar\ on the projector. . How to attach An anti-theft chain or wire can be attached as shown in the illustration. (Anti-theft chains or wires of up to 0mm in diameter can be used) Anti-theft chain or wire[sold separately]...
Page 14
Setting up Connecting your devices NOTE • Whenever attempting to connect a laptop computer to the projector, be sure to activate the laptop’s RGB external image output (set the laptop to CRT display or to simultaneous LCD and CRT display). For details on how this is done, please refer to the instruction manual of the corresponding laptop computer. • Secure the screws on the connectors and tighten. • Some computers may have multiple display screen modes. Use of some of th\ ese modes will...
Page 15
3 LAN Y R L AUDIO IN3 AUDIO IN1AUDIO OUT USB RGB OUT AUDIO IN2 VIDEOS-VIDEO CB/PB CR/PRCONTROL RGB IN2RGB IN1 K AUX I/OSD CARD Setting up Examples of connection with a computer * In the default setting, the AUDIO IN port is the audio port for the RGB IN, and the AUDIO IN port is the audio port for the RGB IN ports. To change the settings, refer to the AUDIO item in the SETUP menu. (38) LAN Y R L AUDIO IN3 AUDIO IN1AUDIO OUT USB RGB OUT AUDIO IN2 VIDEOS-VIDEO CB/PB...
Page 16
4 Y R L AUDIO IN3 AUDIO IN1AUDIO OUT USB RGB OUT AUDIO IN2 VIDEOS-VIDEO CB/PB CR/PRCONTROL RGB IN2RGB IN1 K Y R L AUDIO IN3 AUDIO IN1AUDIO OUT USB RGB OUT AUDIO IN2 VIDEOS-VIDEO CB/PB CR/PRCONTROL RGB IN2RGB IN1 K Y R L AUDIO IN3 AUDIO IN1AUDIO OUT USB RGB OUT AUDIO IN2 VIDEOS-VIDEO CB/PB CR/PRCONTROL RGB IN2RGB IN1 K Setting up Examples of connection with a VCR/DVD player Audio (R) out Video out Audio cable Audio/Video cable Audio (R) out S-Video outS-Video cable Audio (R) out Component...
Page 17
5 Connecting power supply WARNING ►Please use extra caution when connecting the power cord, as incorrect or faulty connections may result in fire and/or electrical shock. • Only use the power cord that came with the projector. If it is damaged, contact your dealer to newly get correct one. • Only plug the power cord into an outlet rated for use with the powe\ r cord's specified voltage range. • Never modify the power cord. Never attempt to defeat the ground con\ nection of the...
Page 18
6 When using the projector with a wireless LAN please insert the included \ Wireless Network Card. When using a commercial SD Memory card in order to view images insert th\ e SD Memory card in the same manner. And when using a commercial USB MEMORY in order to view images insert the USB MEMORY to the AUX I/O port. (13) See User's Manual - Network Function for information on using either type of card. . Make sure the projector’s power switch is OFF. . Remove the SD card slot...
Page 19
7 Putting batteries WARNING ►Always handle the batteries with care and use them only as directed. Battery may explode if mistreated. Do not recharge, disassembl\ e or dispose of in fire. And also improper use may result in cracking or leakage, which could res\ ult in fire, injury and/or pollution of the surrounding environment. • Be sure to use only the batteries specified. Do not use batteries of different types at the same time. Do not mix a new battery with used one. • Make sure the plus...
Page 20
8 Using the remote control CAUTION ►Be careful in handling the remote control. • Do not drop or expose the remote control to physical impact. • Do not get the remote control wet or place it on wet objects. It ma\ y result in malfunction. • Remove the batteries from the remote control and store them in a safe place if you won’t be using the remote control for an extended period. • Replace the batteries whenever the remote control starts malfunctio\ ning. • When strong lights (such as direct...