Dukane Imagepro 8776-W Lcd Projector Users Manual

41

2. Equipment connection and network setting
2.5.11 Network Restart
Restarts the projector’s network connection.
ItemDescription
RestartRestarts the projector’s network connection in order to activate new configuration settings.
• Restarting requires you to re-log on in order to further control or 
configure the projector via a web browser.
NOTE
2.5.12 Logoff
When logoff is clicked, the logon screen is displayed (21 : Fig. 2.5.a).
2.5.10 Projector Status
Displays and configures the current projector...

42

Open browser when it is possible to communicate with projector. Corresponding 
browser is Internet Explorer 5.5 or later.
Specify http://(projector IP address)/ to start.
For example, http://192.168.1.10/
(Input this URL when IP address is not changed.)
After start up, enter your ID and password, and click [Logon]. Following window 
appears as shown in fig. 2.6.a. 
You can use your Web browser to remote control the projector once the projector 
is properly configured and connected to your PC via the...

43

2.6 Utilize Web Remote Control (Continued)
Click “Remote Control” in this window to display Web Remote Control as shown in 
fig.2.6.b.
The same operation as the 
bundled remote control will done.
UP/LEFT/RIGHT/DOWN 
corresponds to ▲/◄/►/▼ 
respectively.
Each mode will be activated by 
clicking these buttons.
• LIVE MODE
• THUMBNAIL
• SLIDE SHOW
• DIRECTORY
Fig. 2.6.b Web Remote Control
• Web Remote Control does not support repeat function when it is kept 
clicking.
• Since automatic repeat function...

44

3. How to use Projector software – Basics -
This section explains how to use the “MIU Live Viewer”.
3.1 How to use “MIU Live Viewer”
3.1.1. Install “MIU Live Viewer”
In order to use the projector with a PC for Live Mode, you will first need to install 
the accompanying software on all the PCs you will be using.
 
• OS:    Windows 2000 Professional Service Pack4, 
 Windows XP Home Edition/Professional
• Graphic Interface:    DirectX 6.1a or higher; Video RAM 4MB or higher 
 (8MB recommended)
• CPU:...

45

3. How to use Projector software – Basics -
3.1.2. Software Installation Procedure
1) Turn on the PC.
2) Shut down all applications.
3)  Insert the accompanying CD-ROM into the 
PC's CD-ROM drive.
4)  After a moment, the Welcome to MIU Utilities 
Setup dialog will appear as shown on the right. 
Press Next.
If the Welcome to MIU Utilities Setup dialog doesn't appear, proceed as 
follows:
(1) Click on the Start button on the toolbar and select Run.
(2) Enter E:\software\setup.exe and then...

46

3.1 How to use “MIU Live Viewer” (Continued)
Fig. 3.1.3.a “MIU Live Viewer” Window
3.1.3 Explanation of  “MIU Live Viewer”
Double click “LiveViewer.exe” to start up. Fig. 3.1.3.a appears on your screen.
w
r
q
e
s
y
u
t
aoi
3. How to use Projector software – Basics -
8)  The Hardware Installation dialog appears. 
Press Continue Anyway.
9)  After a moment, installation will complete and 
the Setup Complete dialog will appear as 
shown on the right. Click Finish.
   This completes the software...

47

3. How to use Projector software – Basics -
[“MIU Live Viewer” window: Fig. 3.1.3.a]
1)  “File” button 
Display file menu.
2)  “Help” button 
Display “MIU Live Viewer” information.
3)  Stop button 
Disconnect projector connection.
4)  Capture start button 
Start real time display. 
5)  Minimize button 
Close “MIU Live Viewer” window and display “MIU Live Viewer” as icon on the 
task tray.
6)  “Option” button 
Display Option window.
7)  “Refresh” button 
Refresh the current PC network setting.
8)...

48

3. How to use Projector software – Basics -
3.1 How to use “MIU Live Viewer” (Continued)
1)  CPU Share 
Set up any capturing performance on the PC screen by using control bar
Low (At the far left): Set this position when many CPU resources are required 
by applications other than “MIU Live Viewer”. This setting is not 
good for displaying frequently changed patterns due to decrease in 
screen refresh rate by “MIU Live Viewer” performance degrading.
High (At the far right): Set this position when...

49

3. How to use Projector software – Basics -
1)  JPEG Quality 
When “MIU Live Viewer” is used, it captures PC screen image. Then that is 
compressed as JPEG and sent to projector. By control bar in this tab, you can 
set compression rate.
Low (At the far left, Low picture quality): Make JEPG compression rate high. 
Screen refresh interval becomes shorter due to low volume 
transferred data, but picture quality decreases.
High (At the far right, High picture quality): Make JEPG compression rate 
low....

50

3. How to use Projector software – Basics -
This section explains basic of how to use “MIU Live Viewer” functions.
• Before start up the MIU Live Viewer, you have to set the projector into LIVE 
MODE by either of following way.
1) from Web Remote Control
    (1) Select LIVE MODE
2)  from OSD Menu
    (1) Set the port into MIU menu by remote control or Keypad.
    (2)   Open the OSD Menu by pressing ▲/◄/►/▼ Keypad button on the projector 
or Menu button on remote control.
    (3)   Select the LIVE...