Digital Projection Titan 1080p 3d, Dual 3d, Titan 1080p 3d, Dual 3d Ultra Contrast, Titan Dual Fastframe User Manual

							
Rev B September 2010 Page 5.17
Digital Projection TITAN 1080p 3D, Dual 3D. Ultra Contrast User Manual 5. Userware

 For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also Section	4, 	Overview.

TCGD page
TCGD - Target Colour Gamut Data - can be used to match the display to a pre-
defined colour gamut, for example:
to match the MCGD values from another projector
to	match	a	specification	from	the	film	maker
To see the TCGD page, click on TCGD.
TCGD values
To enter TCGD values manually, click on each box in turn, and enter the x and y 
values for each colour.
x and y are the colour coordinates. The system will automatically calculate the most 
efficient value of gain to maximise the projector’s light output.
  The example below shows what is required to set the projectors colour gamut to 
Rec 709:
•
•
Notes
  Read the notes on MCGD, 
TCGD and ColorMAX earlier 
in this section before making 
any TCGD settings.
  1. New TCGD values will not 
be applied to the projector until 
one of the two Write buttons is 
pressed.
  2. The values will not be used 
until the ColorMAX User 1 or 
ColorMAX User 2 is chosen 
in the Colour or Global 
Colourimetry menus.
  3. If one of the 
User settings 
is already in use, then it will be 
necessary to re-apply it before 
any change is seen.
TCGD 
values 
						

							
Page 5.18  Rev B September 2010
5. Userware Digital Projection TITAN 1080p 3D, Dual 3D. Ultra Contrast User Manual

 For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also Section	4, 	Overview.

Update Graph
Click on Update Graph to show the effects of the new color gamut graphically.
Save File
Click on Save to save the values on screen to a  TCgD	file on the computer.
  When prompted, enter a filename or browse to an existing file that is to be 
overwritten.
Open	file
To retrieve a set of saved TCGD values, click on Open .
 When prompted, enter a filename or browse to the file that is to b e opened.
Write User 1, User 2
Click on Download User 1 or Download User 2 to save the values on screen to 
one of the two ColorMAX User settings on the projector.
Read User 1, User 2
Click on Read User 1 or Read User 2 to replace the values on screen with one 
of the two ColorMAX User settings on the projector.
•
•
•
•
•
Notes
 Read the notes on MCGD, 
TCGD and ColorMAX earlier 
in this section before making 
any MCGD settings.
 TCGD files are named 
filename.tcgd.
  The projector uses the values 
entered on the MCGD page, as 
the starting settings from which 
to calculate what adjustments 
are necessary to achieve the 
color gamut specified on the 
TCGD page.
tCGD page continued 
						

							
Rev B September 2010 Page 5.19
Digital Projection TITAN 1080p 3D, Dual 3D. Ultra Contrast User Manual 5. Userware

 For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also Section	4, 	Overview.

Notes
  3D may not be present on some 
models
 For more information about the 
3D settings, see Setup menu, 
in section  4. Controlling the 
projector.
3D page
To see the 3D page, click on 3D.
3D Enable
Click on 3D Enable to turn 3D mode On  or Off .
3D Input
Click on 3D Input to select from the drop down menu.
Dark Time
Use the slider to adjust the Dark Time.
Sync Delay
Use the slider to adjust the Sync Delay.
Frame Dominance
Click on Frame Dominance to select from the drop down menu.
3D	Sync	Output	Polarity
Click on 3D	Output	Polarity to select from the drop down menu.
•
•
•
•
•
•
• 
						

							
Page 5.20  Rev B September 2010
5. Userware Digital Projection TITAN 1080p 3D, Dual 3D. Ultra Contrast User Manual

 For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also Section	4, 	Overview.

Notes
 3D files are named 
filename.ps3d.
Frame Rate Multiplier
Click on Frame Rate Multiplier to select from the drop down menu.
3D Format
Click on 3D Format to select from the drop down menu.
Create 3D Preset
Click on Create 3D Preset to save the current 3D settings to a  3D	file on the 
computer.
 When prompted, enter a filename or browse to an existing file that is to be 
overwritten.
Recall 3D Preset
To recall a set of saved 3D settings, click on Recall 3D Preset
  When prompted, enter a filename or browse to the file that is to b e opened.
The name of the last 3D file opened will be displayed against Last 3D Preset 
Recall.
•
•
•
•
3D page continued 
						

							
Rev B September 2010 Page 5.21
Digital Projection TITAN 1080p 3D, Dual 3D. Ultra Contrast User Manual 5. Userware

 For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also Section	4, 	Overview.

Notes
  The Global page will not be 
available unless Global is 
selected in Modal Colour 
Mode (see next page).
 For more information about 
colour mode, see Colour menu 
and Setup menu, in section 
4. Controlling the projector
.
  Select ColorMAX User 1 or 
ColorMAX User 2,  to use the 
TCGD values set up on the  
TCGD page.
 For more information about 
ColorMAX , read the notes on 
MCGD, TCGD and ColorMAX 
earlier in this section
Global Colour page
To see the Global page, click on Global.
Global Colour Mode
Click on Global Colour Mode to select from the drop down menu.
•
• 
						

							
Page 5.22  Rev B September 2010
5. Userware Digital Projection TITAN 1080p 3D, Dual 3D. Ultra Contrast User Manual

 For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also Section	4, 	Overview.

Notes
  For more information about 
colour mode, see Colour menu 
and Setup menu, in section 
4. Controlling the projector
.
  Select ColorMAX User 1 or 
ColorMAX User 2,  to use the 
TCGD values set up on the  
TCGD page.
 For more information about 
ColorMAX , read the notes on 
MCGD, TCGD and ColorMAX 
earlier in this section
Modal Colour page
To see the Modal Colour page, click on Modal.
Modal Colour Mode
Click on Modal Colour Mode to select from the drop down menu.
•
• 
						

							
Rev B September 2010 Page 5.23
Digital Projection TITAN 1080p 3D, Dual 3D. Ultra Contrast User Manual 5. Userware

 For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also Section	4, 	Overview.

Lift and Gain sliders
Use the sliders to adjust the Lift and Gain for Red, Green and Blue individually.
Temperature slider
Use the slider to adjust the Colour Temperature between 3,000K and 10,000K.
•
•
Modal Colour page continuedNotes
  For more information about 
colour mode, see Colour 
menu, and Setup menu, in 
section  4. Controlling the 
projector.
 The Lift and Gain sliders are 
available only when User is 
selected in Modal Colour 
Mode.
 The Temperature slider is 
available only when Colour 
Temperature is selected in 
Modal Colour Mode. 
						

							
Page 5.24  Rev B September 2010
5. Userware Digital Projection TITAN 1080p 3D, Dual 3D. Ultra Contrast User Manual

 For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also Section	4, 	Overview.

NotesInformation page
To see the Information page, click on Info.
Projector Information
Click on Projector Information to see the following information about the 
projector and the Userware:
Digital Projection
Click on Digital Projection to see the following contact information:
•
•
• 
						

							
Rev B September 2010 Page 5.25
Digital Projection TITAN 1080p 3D, Dual 3D. Ultra Contrast User Manual 5. Userware

 For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also Section	4, 	Overview.

Notes
  For more information about the 
FastFrame settings, see Setup 
menu, in section  4. Controlling 
the projector.
FastFrame page
To see the FastFrame page, click on F-Frame.
FastFrame Enable
Click on FastFrame Enable to turn FastFrame mode On  or Off .
Dark Time
Use the slider to adjust the Dark Time.
•
•
• 
						

							
Page 5.26  Rev B September 2010
5. Userware Digital Projection TITAN 1080p 3D, Dual 3D. Ultra Contrast User Manual

 For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also Section	4, 	Overview.

Notes
  For more information about 
lamp mode, see Setup menu, 
in section  4. Controlling the 
projector.
System page
To see the System page, click on System.
OSD
Click on OSD to turn the on-screen display On  or Off .
Backlight
Click on Backlight to turn the control panel backlight On  or Off .
DMD controls
Click on the DMD buttons to turn each DMD On or Off.
Lamp mode
Click on Lamp mode to select from the drop down menu.
Lamp Power slider
Use the slider to adjust the lamp power from 80% to 100%.
•
•
•
•
•
•