Digital Projection Sxga+, 1080p, Wuxga Users Guide

61
italianonorskSISTEMA DEI MENU
MENYSYSTEM
SOTTOMENU IMPOSTAZIONI
Il sottomenu impostazioni contiene le impostazioni 
specifiche del sistema e indipendenti dalla sorgente, ad 
esempio la rete e l’interazione con apparecchiature di terzi, 
la gestione della potenza di visualizzazione, le impostazioni 
di sicurezza e del codice PIN tra le altre  . 
impostazione data e ora
Impostare per il proiettore la data e l’ora di sistema per 
utilizzare le opzioni di programmazione e il timer  . 
Data e ora sono...

62
englishdeutsch francais español
factory reset
Factory reset erases all memorised source and system 
settings, and sets all back to default values .
service
Service enters the service menu
 . This is available to 
authorised service personnel only  . Entering the service menu 
without proper knowledge may permanentely damage the 
projector  .
remote control ID
The projector can be set up to have a unique ID, so that 
it only responds to remote controls transmitting the same 
ID . Up to 99 units can be...

63
italianonorsk
back
set date and time
timer
PIN code
network
factory reset
service
remote control ID
DPMS
DPMS timeout
backlight timeout
menu timeout
splash
baudrate
broadcast
30 minutes
30 seconds
30 seconds black
19200
picture installation settingsprofileslanguage status
ripristino in fabbrica
Il ripristino di fabbrica cancella tutte le impostazioni di 
sistema e le sorgenti memorizzate e reimposta tutti i valori 
di default .
assistenza
Service (assistenza) consente di accedere al menu...

64
englishdeutsch francais español
PROFILES SUB MENU
The profiles sub menu contains predefined and user saved 
projector setup profiles, so that a specific setting or desired 
projection mode quickly can be reinstated .
store settings
Displays information about the source and projector status .
recall settings
Turn the On Screen Display on (display) or off (hide) during 
source scan . MENU SYSTEM
MENÜSYSTEMSYSTEME MENUSISTEMA DE MENÚS
SUBMENÚ PERFILES
El submenú Perfiles contiene los perfiles de...

65
italianonorskSISTEMA DEI MENU
MENYSYSTEM
PROFILER UNDERMENY
systeminformasjon
Viser informasjon om tilkoblet kilde og projektorstatus .
OSD
Skrur skjermvisning (on screen display) på og av .
back
store settings
recall settings
pictureinstallation settingsprofileslanguage status
pictureinstallation settingsprofileslanguage status
back
english
français
Deutsch
español
norsk
svensk
Русский
à´	¯
ÔŠ   .¤

_j¤
português
italiano
SPRÅK UNDERMENY
Velg språk for menysystemet og OSD meldinger og...

66
englishdeutsch francais español
STATUS SUB MENU
The status sub menu can be invoked through the menu 
system, or directly from the “INFO” key on the remote 
control . It gives direct, and easy to understand information 
on system and connected source status . MENU SYSTEM
MENÜSYSTEMSYSTEME MENUSISTEMA DE MENÚS
UNTERMENÜ STATUS
Das Untermenü Status wird entweder über das 
Menüsystem aufgerufen oder über die Taste INFO an der 
Fernbedienung  . Es zeigt Ihnen direkte, leicht verständliche 
Informationen...

67
italianonorskSISTEMA DEI MENU
MENYSYSTEM
STATUS UNDERMENY
Status undermenyen gir enkel og oversiktlig tilgang til 
informasjon om systemet, og tilkoblet kilde .
pictureinstallation settingsprofileslanguage status
back
source information
model name
part number
serial number
manufactured (y)
manufactured (w)
software version
lamp remaining
lamp time
total operating
lamp power
MAC address
IP address
subnet mask
default gateway
TCP/UDP port
F20 sx+
101-1200-08 072000201 200720
001-0134-01
2957 hrs31 hrs...

englishdeutsch francais
68
NO IMAGE
No connection: 
Check if all connections are properly made .
Source off: 
Check if the equipment is powered on .
Lamp dead: 
The lamp may need replacement . 
Source hibernated: 
Engage the source to display and activate image .
Notebook external screen: 
Different notebook PC’s use different combinations of keystrokes to enable the 
external graphics port .
Source scan off: 
Check SOURCE SCAN in the INSTALLATION sub menu . If setting is OFF, the 
projector will not...

españolitaliano norsk
69
SOLUCIÓN DE PROBLEMASRISOLUZIONE DEI PROBLEMI
FEILFINNING
NESSUNA IMMAGINE
Nessuna connessione:
controllare se i collegamenti sono stati eseguiti correttamente .
Sorgente spenta: 
controllare se l’apparecchiatura è alimentata .
Lampada spenta: 
può essere necessario sostituire la lampada . Controllare LAMP TIME (Durata 
lampada) nel sottomenu UTILITIES (Utilità) .
Sorgente sospesa: 
impegnare la sorgente per visualizzare e attivare l’immagine .
Schermo esterno notebook: 
dei PC...

englishdeutsch francais
70
The projector may from time to time need cleaning . Never open the unit, as this will 
void any warranties  . Refer service and repair to qualified personnel only  . 
The projector is using lamps that have a limited life time  . Please refer to the LAMP 
CHANGE section below for further details .
Only the exterior of the unit may be cleaned  . Use a damp cloth  . Make sure no 
liquids enter the inside of the projector Vacuum clean all the air vents (A) regularly 
to maintain...