Digital Projection Projector E-Vision 7500 Series User Manual

Digital Projection E-Vision 7500 Series  MENU MAP Operating Guide
55
CONTROL
Eco Network Power   Standard, Eco
Auto Power Off   On, Off
Auto Power On   On, Off
Projector Control   RS232, Network, Both
Network  
IP Address
Subnet Mask
Gateway
DHCP On, Off
Apply Press ENTER to execute.
Startup Logo   On, Off
Trigger   Auto, 5:4, 4:3, 16:10, 16:9, 1.88, 2.35, Letterbox, Native, Unscaled
Auto Search   On, Off
Dynamic Black   On, Off
3D
3D Mode Off, DLP-Link, IR
3D Sync Invert   On, Off
3D Format Frame...

56 
Rev D July 2014
Digital Projection E-Vision 7500 Series   Operating Guide
This page is intentionally left blank.  

E-Vision 7500 Series
High Brightness Digital Video Projector
REMOTE COMMUNICATIONS GUIDE
Rev D July 2014  

Digital Projection E-Vision 7500 Series  IN THIS GUIDE Remote Communications Guide
IN THIS GUIDE
Introduction ........................................................................\
................................59
Operation commands ...............................................................................................59
Key commands ..........................................................................................................59
The Operation Commands...

Digital Projection E-Vision 7500 Series  INTRODUCTION Remote Communications Guide
59
Introduction
The projector can be controlled by using an external control system or a PC via a LAN or RS232 serial interface, using a terminal-emulation 
program, such as HyperTerminal.
Operation commands
Operation commands simulate menu operations and determine the settings o\
f the projector, and use the following format:
• All commands consist of ASCII text strings starting with the letters ‘op’, and ending with an...

Digital Projection E-Vision 7500 Series  THE OPERATION COMMANDS Remote Communications Guide
60
The Operation Commands
Notes
INPUT menu
input.sel= ?0 = HDMI
1 = DVI
2 = VGA
3 = Component / BNC
4 = DP
Not applicable in STANDBY mode or when Picture 
Mute is On.
pattern= ?0 = Color Bar
1 = Cross Hatch
2 = Burst
3 = Red (TI)
4 = Green (TI)
5 = Blue (TI)
6 = WHITE (TI)
7 = BLACK (TI)
8 = HRamp (TI)
9 = Red (uncorrected)
10 = Green (uncorrected)
11 = Blue (uncorrected)
12 = White (uncorrected)
13 = Black...

Digital Projection E-Vision 7500 Series  THE OPERATION COMMANDS Remote Communications Guide
61
...continued from previous page
Notes
PICTURE menu
pic.mode= ?0 = High Bright
1 = Presentation
2 = Video
contrast= ? + -0 ~ 200Not applicable in STANDBY mode or without signal 
locked.
bright= ? + -0 ~ 200Not applicable in STANDBY mode or without signal 
locked.
saturat= ? + -0 ~ 200Not applicable in STANDBY mode or without signal 
locked.
Only valid when the input is Composite or 
S-Video.
tint= ? + -0 ~...

Digital Projection E-Vision 7500 Series  THE OPERATION COMMANDS Remote Communications Guide
62
...continued from previous page
Notes
green.gain= ? + -0 ~ 200Not applicable in STANDBY mode or without signal 
locked.
blue.gain= ? + -0 ~ 200Not applicable in STANDBY mode or without signal 
locked.
sharp= ? + -0 ~ 31Not applicable in STANDBY mode or without signal 
locked.
nr= ? + -0 ~ 15Noise Reduction
Not applicable in STANDBY mode or without signal 
locked.
aspect= ?0 = 5:4
1 = 4:3
2 = 16:10
3 = 16:9
4 =...

Digital Projection E-Vision 7500 Series  THE OPERATION COMMANDS Remote Communications Guide
63
...continued from previous page
Notes
auto.img(execute)Auto Sync
Not applicable in STANDBY mode or without signal 
locked.
hsg.r.gain= ? + -0 ~ 200Not applicable in STANDBY mode or without signal 
locked.
hsg.g.gain= ? + -0 ~ 200Not applicable in STANDBY mode or without signal 
locked.
hsg.b.gain= ? + -0 ~ 200Not applicable in STANDBY mode or without signal 
locked.
hsg.c.gain= ? + -0 ~ 200Not applicable in...

Digital Projection E-Vision 7500 Series  THE OPERATION COMMANDS Remote Communications Guide
64
...continued from previous page
Notes
hsg.g.hue= ? + -0 ~ 200Not applicable in STANDBY mode or without signal 
locked.
hsg.b.hue= ? + -0 ~ 200Not applicable in STANDBY mode or without signal 
locked.
hsg.c.hue= ? + -0 ~ 200Not applicable in STANDBY mode or without signal 
locked.
hsg.m.hue= ? + -0 ~ 200Not applicable in STANDBY mode or without signal 
locked.
hsg.y.hue= ? + -0 ~ 200Not applicable in STANDBY...