Digital Projection Projector E-Vision 7500 Series User Manual

Digital Projection E-Vision 7500 Series  WIRING DETAILS Connection Guide
25
HDMI input
19 way type A connector
1 TMDS Data 2+
2 TMDS Data 2 Shield
3 TMDS Data 2-
4 TMDS Data 1+
5 TMDS Data 1 Shield
6 TMDS Data 1-
7 TMDS Data 0+
8 TMDS Data 0 Shield
9 TMDS Data 0-
10 TMDS Clock+
11 TMDS Clock Shield
12 TMDS Clock-
13 CEC
14 not connected
15 SCL (DDC Clock)
16 SCA (DDC Data)
17 DDC/CEC Ground
18 +5 V Power
19 Hot Plug Detect
pin view of panel connector
Notes
 For full details of all input settings, 
see...

Digital Projection E-Vision 7500 Series  WIRING DETAILS Connection Guide
26
DVI-D
24 way D-type connector
1 TMDS Data 2-
2 TMDS Data 2+
3 TMDS Data 2 Shield
4 unused
5 unused
6 DDC Clock
7 DDC Data
8 unused
9 TMDS Data 1-
10 TMDS Data 1+
11 TMDS Data 1 Shield
12 unused
13 unused
14 +5 V Power
15 Ground
16 Hot Plug Detect*
17 TMDS Data 0-
18 TMDS Data 0+
19 TMDS Data 0 Shield
20 unused
21 unused
22 TMDS Clock Shield
23 TMDS Clock+
24 TMDS Clock-
* Hot plug detect (HPD) is fully DVI compliant.  DVI sources...

Digital Projection E-Vision 7500 Series  WIRING DETAILS Connection Guide
27
DisplayPort
DisplayPort 1.2
Pin 1   ML_Lane 0 (p)     Lane 0 (positive)  
Pin 2   GND       Ground  
Pin 3   ML_Lane 0 (n)     Lane 0 (negative)  
Pin 4   ML_Lane 1 (p)     Lane 1 (positive)  
Pin 5   GND       Ground  
Pin 6   ML_Lane 1 (n)     Lane 1 (negative)  
Pin 7   ML_Lane 2 (p)     Lane 2 (positive)  
Pin 8   GND       Ground  
Pin 9   ML_Lane 2 (n)     Lane 2 (negative)  
Pin 10   ML_Lane 3 (p)     Lane 3 (positive)...

Digital Projection E-Vision 7500 Series  WIRING DETAILS Connection Guide
28
VGA
15 way D-type connector
1 R
2 G
3 B
4 unused 
5 Digital Ground (H Sync)
6 R Ground
7 B Ground
8 G Ground
9 +5v
10 Digital Ground (V Sync/DDC)
11 unused
12 SDA
13 H Sync
14 V Sync
15 SCL
COMPONENT
5 x 75 ohm BNC
RGBHV  RGsB  YPbPr  YCbCr
Green     Green + Sync  Y    Y
Blue   Blue  Pb  Cb
Red     Red   Pr   Cr
Hsync
Vsync
pin view of female connector
Notes
 For full details of all input settings, 
see the 
INPUT menu in the...

Digital Projection E-Vision 7500 Series  WIRING DETAILS Connection Guide
29
Control connections
LAN connection
RJ45 socket
RS232 Serial control input
1 unused
2 Received Data (RX)
3 Transmitted Data (TX)
4 unused
5 Signal Ground
6 unused
7 unused
8 unused
9 unused
Wired Remote control connection
3.5mm mini jack
Tip Not connected
Ring Signal
Sleeve Ground
Screen Trigger output
3.5mm mini jack
Tip Signal
Sleeve Ground
Notes
 For full details of all control settings, 
see the 
CONTROL menu in the 
Operating...

3030 
Rev D July 2014
Digital Projection E-Vision 7500 Series   Connection Guide 
This page is intentionally left blank.  

E-Vision 7500 Series
High Brightness Digital Video Projector
OPERATING GUIDE
Rev D July 2014  

Digital Projection E-Vision 7500 Series  IN THIS GUIDE Operating Guide
IN THIS GUIDE
Using The Menus ........................................................................\
.......................34
Navigating the menus ...............................................................................................34
Submenus ..................................................................................................................35
Selecting parameters...

Digital Projection E-Vision 7500 Series  IN THIS GUIDE Operating Guide
Menu Map........................................................................\
.....................................53
INPUT .........................................................................................................................53
PICTURE ....................................................................................................................53
LAMPS...

Digital Projection E-Vision 7500 Series  USING THE MENUS Operating Guide
34
Using The Menus
Use the buttons on the projector control 
panel or on the remote control, to 
access the menu system.
• To open the on-screen display 
(OSD), press MENU. To close, 
press EXIT/RETURN.
Navigating the menus
• Select a menu using
 and,
• then open the menu by pressing
.
The first item in the menu is 
highlighted.
• Select an item in the menu using
 and.
• To open another menu, first close 
the current menu by...