Digital Projection Projector E-Vision 7500 Series User Manual

Digital Projection E-Vision 7500 Series  A TOUR OF THE MENUS Operating Guide
45
ALIGNMENT menu
Projection Mode
• Front and Rear define whether the projector is in front of the screen 
or behind it. 
Set to Ceiling + Front or Ceiling + Rear if the projector is ceiling 
mounted.
Fan Mode
• Adjusts the fan speeds to optimise cooling when the projector is in 
vertical orientation. 
Set to Up or Down as appropriate when projecting lens up or down.
Lens Control
1. Press ENTER to display the Lens Control box....

Digital Projection E-Vision 7500 Series  A TOUR OF THE MENUS Operating Guide
46
ALIGNMENT menu continued
Lens Memor y submenu
The current lens position, focus and zoom settings can be saved in 
one of ten memories, for later recall.
• Press ENTER to open the Lens Memor y submenu.
Save Memor y
• Press ENTER to open the Save Memory submenu.
• Use and to select from Lens Memor y 1 
to Lens Memor y 10.
• Press ENTER to save the current settings.
Load Memor y
• Press ENTER to open the Load Memory submenu.
•...

Digital Projection E-Vision 7500 Series  A TOUR OF THE MENUS Operating Guide
47
ALIGNMENT menu continued
Digital Alignment submenu
• Press ENTER to open the Digital Alignment submenu.
Digital Zoom, Digital Pan, Digital Scan
• Use and to select a digital alignment control.
• Set the slider as required.
Reset
• Press ENTER to reset all Digital Alignment settings to zero.
H/V Alignment submenu
• Press ENTER to open the H/V Alignment submenu.
H Zoom, V Zoom, H Shift, V Shift
• Use and to select an alignment...

Digital Projection E-Vision 7500 Series  A TOUR OF THE MENUS Operating Guide
48
CONTROL menu
Eco Network Power
• Set this to Standard or Eco as required. In Eco mode, when the 
projector is in STANDBY mode, the LAN connection is disabled.
Auto Power Off
• Set this to On if you want the projector to go into Standby mode 
when no input source is detected for 20 minutes.
Auto Power On
• Set this to On if you want the projector to start up immediately when 
the mains is connected.
• Set this to Off if you...

Digital Projection E-Vision 7500 Series  A TOUR OF THE MENUS Operating Guide
49
CONTROL menu continued
Network submenu
• Press ENTER to open the Network submenu.
Set DHCP to Off  to enable manual editing of the IP Address, 
Subnet Mask and Gateway fields. If DHCP is On, these fields are 
updated automatically and manual editing is disabled.
Startup Logo
• Set this to On if you want the DP logo to show when the projector is 
first switched on.
Trigger
• Set this to Auto if you want the Trigger output to...

Digital Projection E-Vision 7500 Series  A TOUR OF THE MENUS Operating Guide
50
CONTROL menu continued
3D submenu
• Press ENTER to open the 3D menu, then select from the list:
3D Mode
Choose from DLP-Link and IR, or Off to disable 3D.
3D Sync Invert
Set to On or Off as required.
3D Format
Choose from Frame Sequential, Top/Bottom, Side by Side and 
Frame Packing.
INPUT
PICTURE LAMPS
ALIGNMENTCONTROL
SERVICEEcoNetwork Power 
Auto Power Off 
Auto Power On 
Projector Control 
Network Enter
Startup Logo...

Digital Projection E-Vision 7500 Series  A TOUR OF THE MENUS Operating Guide
51
CONTROL menu continued
Language submenu
• Press ENTER to open the Language Selection menu, then select a 
language from the list.
Notes
 See also Using the Menus, earlier 
in this guide and  Menu Map, later in 
this guide.INPUT PICTURE LAMPS
ALIGNMENTCONTROL
SERVICEEcoNetwork Power 
Auto Power Off 
Auto Power On 
Projector Control 
Network Enter
Startup Logo 
Trigger 
Auto Search 
Dynamic Black 
3D Enter
Language Enter...

Digital Projection E-Vision 7500 Series  A TOUR OF THE MENUS Operating Guide
52
SERVICE menu
Information
• The first part of the menu is for information only.
Blue Only
• Set this to On or Off as required.
Factor y Reset
• The projector will ask for confirmation before restoring all settings to 
factory defaults.
• When the confirmation box appears, use  or to move the 
blue highlight to OK or Cancel, then press ENTER to confirm your 
selection.
INPUT
PICTURE LAMPS
ALIGNMENT CONTROLSERVICEModel
:...

Digital Projection E-Vision 7500 Series  MENU MAP Operating Guide
53
Menu Map
Menu Submenus and Controls
INPUT
Input Selection  HDMI, DVI, VGA, Component/BNC, Display Port, HDBaseT
Test Pattern  Color Bar, Crosshatch, Burst, Red, Green, Blue, White, Black, H Ramp, Uncorrected Red, Uncorrected 
Green, Uncorrected Blue, Uncorrected White, Uncorrected Black, Off
Color Space   Auto, YCbCr, YPbPr, RGB-PC, RGB-Video
Input Lock  Auto, 48Hz, 50Hz, 60Hz
Background  Logo, Blue, Black, White
Auto Sync Adjust...

Digital Projection E-Vision 7500 Series  MENU MAP Operating Guide
54
LAMPS
Mode  Dual, Lamp 1, Lamp 2, Single
Power  Normal, Eco, Custom Power
High Altitude  Off, On
Custom Power Level 75-100% (100%)
Lamp Status  Information Only: Lamp 1 On, Off     Lamp 2 On, Off
ALIGNMENT
Projection Mode  Front, Rear, Ceiling + Front, Ceiling + Rear
Fan Mode  Normal, Up, Down
Lens Control  Shift, Zoom/Focus
Lens Memory 
Load Memory  Memory 1-10
Save Memory  Memory 1-10
Center Lens  Press ENTER to execute
Keystone...