Digital Projection Projector E-Vision 7500 Series User Manual

Digital Projection E-Vision 7500 Series  OPERATING THE PROJECTOR Installation and Quick-Start Guide
15
Switching the projector off
1. Press and hold POWER  on the control panel or POWER OFF on the remote control for 5 seconds.
The lamp will go off, and the Power indicator on the control panel will flash amber for a few seconds whilst the lamp cools.  The Power 
indicator on the control panel will then show red and the projector will\
 be in Standby mode.
2. Switch off at the switch next to the power...

1616 
Rev D July 2014
Digital Projection E-Vision 7500 Series   Installation and Quick-Start Guide 
This page is intentionally left blank.  

E-Vision 7500 Series
High Brightness Digital Video Projector
CONNECTION GUIDE
Rev D July 2014  

Digital Projection E-Vision 7500 Series  IN THIS GUIDE Connection Guide
IN THIS GUIDE
Signal Inputs And Outputs ........................................................................\
.....19
Supported Signal Input Modes .....................................................................20
Control Connections  ........................................................................\
................23
Wiring Details ........................................................................\...

Digital Projection E-Vision 7500 Series  SIGNAL INPUTS AND OUTPUTS Connection Guide
19
Signal Inputs And Outputs
1 HDBaseT
Receives digital input from HDBaseT-compliant 
devices.
2 3D Sync Out
Sync output signal. This may be affected by the 3D 
Sync Invert setting in the CONTROL > 3D menu.
Connect this to your IR emitter or ZScreen.
3 DVI-D
Connect a DVI-D cable to the DVI connector.
4 HDMI
HDMI 1.4 input. Connect an HDMI cable to the 
connector.
5 DisplayPort
DisplayPort 1.2 input. Connect a DisplayPort...

Digital Projection E-Vision 7500 Series  SUPPORTED SIGNAL INPUT MODES Connection Guide
20
Supported Signal Input Modes
Signal TypeResolutionRefresh 
Rate (Hz)
 COMPONENT 
-  RGBHV 
 COMPONENT 
-    YUV 
 VGA -  RGBHV  VGA - YUV  DVI-D (EIA Timing) 
 HDMI - RGB (EIA 
Timing) 
 HDMI - YUV 8-bit 
(EIA Timing) 
 Display Port (EIA 
Timing) HDBaseT
PC720x40070  
640x48059.94            
640x48072  
640x48075            
640x48085          
800x60056  
800x60060.32           ...

Digital Projection E-Vision 7500 Series  SUPPORTED SIGNAL INPUT MODES Connection Guide
21
Signal TypeResolutionRefresh 
Rate (Hz)
 COMPONENT 
-  RGBHV 
 COMPONENT 
-    YUV 
 VGA -  RGBHV  VGA - YUV  DVI-D (EIA Timing) 
 HDMI - RGB (EIA 
Timing) 
 HDMI - YUV 8-bit 
(EIA Timing) 
 Display Port (EIA 
Timing) HDBaseT
1280x96060          
1280x102460.02          
1280x102475.02            
1280x102485.02          
1366x76859.79          
1440x90059.887          
1600x120060 ...

Digital Projection E-Vision 7500 Series  SUPPORTED SIGNAL INPUT MODES Connection Guide
22
Signal TypeResolutionRefresh 
Rate (Hz)
 COMPONENT 
-  RGBHV 
 COMPONENT 
-    YUV 
 VGA -  RGBHV  VGA - YUV  DVI-D (EIA Timing) 
 HDMI - RGB (EIA 
Timing) 
 HDMI - YUV 8-bit 
(EIA Timing) 
 Display Port (EIA 
Timing) HDBaseT
1440x480i60        
1440x576i50        
480i59.94
576i50
EDTV480p59.94                  
576p50                  
HDTV1035i60        
1080i50             ...

Digital Projection E-Vision 7500 Series  CONTROL CONNECTIONS Connection Guide
23
Control Connections
1 LAN
• The projector’s features can be controlled via a 
LAN connection, using commands described in the 
Remote Communications Guide.
• Alternatively, use the Web	Configuration	Utility to 
control the projector.
• Crestron RoomView® Express built-in. Enabling 
support staff to remotely take control of classroom 
technology, perform remote system diagnostics, 
track projector usage and log network...

Digital Projection E-Vision 7500 Series  WIRING DETAILS Connection Guide
24
Wiring Details
Signal inputs and outputs
HDBaseT input
RJ45 socket
3D sync connection
Pin 1 +5V
Pin 2 Ground
Pin 3 Stereo sync
Notes
 For full details of all input settings, 
see the INPUT menu in the 
Operating Guide .
HDBaseT input
VESA 3-pin Mini DIN 
Rev D July 2014