Digital Projection Mercury 5000gv Dmd Projector Users Manual

8-5
Digital Projection   
MERCURY 5000gv8. Using the On-Screen Menus
NOTE: The shaded item indicates the default setting. 

8-6
8. Using the On-Screen Menus
Digital Projection   
MERCURY 5000gv
* When selecting “PC
Card”, the “Network
Type” and the “WEP”
setting screens
appear. 

Digital Projection MERCURY 5000gv	8. Using the On-Screen Menus 
Entering Alphanumeric Characters by Using the 
Menu 
Alphabet or numeric characters are used for your IP address 
or projector name. To enter IP Address or projector name, use 
the software keyboard. 
For using the software keyboard, see page 10-10. 
Entering Alphanumeric Characters by Using the 
Remote Control Numeric Buttons 
Input alphanumeric characters by selecting one character at 
a time with the numeric (Source/Input) buttons...

8. Using the On-Screen MenusDigital Projection MERCURY 5000gv 
Edit .............. Enables you to  change source names or

assign the direct key.

Source Name 
Enter a signal name. Up to 18 alphanumeric 
characters can be used. 
Input Terminal Change the input terminal. RGB1 and RGB2 
are available for RGB signal; Video and S-
Video are available for composite signal. 
Direct key  You can assign specific remote keys for 
direct signal input selection. 
Lock  Set so that the selected signal cannot be...

Digital Projection MERCURY 5000gv 8. Using the On-Screen Menus 
DigiView - SweetVision 
The SweetVision feature provides improvement of contrast 
using a proprietary detail enhancement technology. 
NOTE: This feature is not available for 480p, 576p and HDTV signals. 
O f f ............... Turns off the SweetVision feature

L o w .............  Selects low level

Medium  ........ Selects medium level

High  .............  Selects high level

Split Mode This feature turns on or off to show the effect of...

8. Using the On-Screen MenusDigital Projection MERCURY 5000gv 
Selecting Gamma Correction Mode Use the or buttons to choose one mode from the seven 
listed:  Video-Lo  ..... Video originated material in a Theatrical 
environment with low ambient light 
Film-Lo  ......... Film originated material in a Theatrical 
environment with low ambient light 
Graphics  ..... Emphasising detail - spreadsheets, 
Powerpoint slides etc in high ambient light 
Media  ........... High saturation bright colours in high...

Digital Projection MERCURY 5000gv 8. Using the On-Screen Menus 
Option Adjust Signal Level 
Clamp Timing 
According to the signal, this function sets the detection 
position (i.e., clamp position) of the black level reproduction of 
the analog input signal. Normally this is not used. 
Mode 0-4 ..... Select the appropriate one. 
Adjust  .......... This permits  the video clamp position for each 
signal to be set. Use "Adjust" when a clamp 
timing error occurs at the time of special 
analog signal...

8. Using the On-Screen MenusDigital Projection MERCURY 5000gv 
Ref. Adjust Using DigiScale - 3D Reform This feature corrects trapezoidal distortion so that the

projected image is rectangular.

Two options are available for correcting procedures.

You can save adjustment settings by using the 3D Reform

Save option on Setup (See page 8-16).

Cornerstone 
See page 3-4. 
* When "Resolution" is set to "Native", "Cornerstone" and
"Keystone" are not available. 
Keystone 
1....

Digital Projection MERCURY 5000gv 8. Using the On-Screen Menus 
Factory Default 
All Data /Current Signal The Factory Default feature allows you to change 
adjustments and setting to the factory preset for source. 
All Data ........ Reset all the adjustments and settings for all the signals to the factory preset except 
Language, Background Logo, Communication 
Speed, Projector ID, Lamp Settings, LAN 
Mode, Password, Security, Remaining Lamp1/ 
2 Time, Lamp 1/2 Hour Meter, Filter Usage and 
Projector...

Menu Page 2 
8. Using the On-Screen MenusDigital Projection MERCURY 5000gv 
Selecting Menu Display Time This option allows you to select how long the projector

waits after the last touch of a button to turn off the menu.

The preset choices are "Manual", "Auto 5 sec", "Auto 15

sec", and "Auto 45 sec". The "Auto 45 sec" is the factory

preset.

Manual ......... The menu can be turned off manually.

Auto  5  sec .. The menu will automatically be turned off in 5...