Home > Digital Projection > Projector > Digital Projection Mercury 5000gv Dmd Projector Users Manual

Digital Projection Mercury 5000gv Dmd Projector Users Manual

Here you can view all the pages of manual Digital Projection Mercury 5000gv Dmd Projector Users Manual. The Digital Projection manuals for Projector are available online for free. You can easily download all the documents as PDF.

Page 91

Digital Projection MERCURY 5000gv	8. Using the On-Screen Menus 
To delete PC card data you registered. 
1. Use the SELECT button to select "Delete" and use the SELECT button to select the list window. 
2. Use the SELECT button to select the PC card data you wish to 
delete. 
3. Press the SELECT button to select "Delete" and press the ENTER 
button. 
The PC card data will be deleted. 
If you've lost your registered PC card, proceed as follows: 
NOTE: Digital Projection or your dealer...

Page 92

8. Using the On-Screen MenusDigital Projection MERCURY 5000gv 
3. Select “Edit” and press the ENTER button to open the Edit window. \
4. Set the Day, Time (24 hours format), On-Time and Off-Time using the 
SELECT buttons and the Software keyboard (1 thru 10). 
5. Select On Timer or Off Timer
6. Repeat the Timer 
To repeat the On Timer or Off Timer program every week, place a 
check mark in “Repeat”. 
7. Select “OK” and press the ENTER button on the remote control to 
complete the setting. To cancel...

Page 93

Digital Projection MERCURY 5000gv	8. Using the On-Screen Menus 
Enabling Sleep Timer 
1. Select your desired time between 30 minutes and 16 hours: Off, 0:30, 
1:00, 2:00, 4:00, 8:00, 12:00, 16:00. 
2. Select “Set” and press the ENTER button on the remote control. 
3. The remaining time starts counting down. 
4. The projector will turn off after the countdown is complete. 
NOTE: •	To cancel the preset time, set "Off" for the preset time or turn off the \
power. 
•	When the remaining time reaches...

Page 94

8. Using the On-Screen MenusDigital Projection MERCURY 5000gv 
Source Information Page 2  Projector Information Page 2 
Signal Type, Video Type, Sync Type, Interlace, Direct Key 
Projector Information Displays the information for your projector such as lamp 
usage, filter usage, version number and others. This dialog 
box has three pages. 
Projector Information Page 1 
Lamp 1 Hour Meter, Lamp 2 Hour Meter 
NOTE: The meters show the sum of Eco and Normal hours. A warning 
message will appear on screen...

Page 95

9

Routine Maintenance

○○○○○○○○○○○○○○○○○○\
○○○○○○○○○○○○○○○○○○○○○○ 
1 Replacing the Lamp ................................. 9-2

2 Replacing or Cleaning the Filter .............. 9-3

3 Cleaning the Cabinet and the Lens ......... 9-3
 

Page 96

9-2
9. Routine Maintenance
Digital Projection   
MERCURY 5000gv
1 Replacing the Lamp
The projector has two lamps pre-wired into one module,
therefore it is not possible to replace a single lamp. After lamp
1 or lamp 2 has been operating for 1000 hours (Normal mode
using the standard lamp, part number 001-742), the "Lamp"
indicator on the control panel will blink red and a warning
message will appear. Even though the lamp may still be
working, replace it as soon as possible to maintain optimal...

Page 97

9-3
Digital Projection   
MERCURY 5000gv9. Routine Maintenance
2 Replacing or Cleaning the Filter
The air-filter prevents dust or dirt from getting inside the
projector and should be cleaned after every 100 hours of
operation (more often in dusty conditions). If the filter is dirty
or clogged, your projector may overheat.
NOTE: The message "Please clean the filters" will be displayed each
time the projector is turned on after it has been used in excess of 168
hours. Should this message appear,...

Page 98

9. Routine Maintenance Digital Projection MERCURY 5000gv 
9-4
 

Page 99

10

Appendix

○○○○○○○○○○○○○○○○○○\
○○○○○○○○○○○○○○○○○○○○○○ 
1 USB Memory Device or USB Memory

Card Reader Support 
............................. 10-2

 Troubleshooting ..................................... 10-3

Specifications ........................................ 10-5

Cabinet Dimensions ............................... 10-7

Pin Assignments of D-Sub RGB Input

Connector 
............................................... 10-7

Compatible Input Signal List ................. 10-8

REMOTE 1 Connector...

Page 100

1
10. Appendix	Digital Projection MERCURY 5000gv 
 USB Memor y Device or USB Memor y Card 
Reader Support 
The projector is compatible with either a USB memory device or 
USB memory card reader which supports the viewer and secu­
rity features. 
•	To use a USB memory device or USB memory card reader, connect the device to the USB port (type A). 
•	Select one of the Drive icons in the Viewer toolbar, Capture 
toolbar and PC Card File setting screen. Up to four drives can 
be accepted. 
•	To use a USB...
Start reading Digital Projection Mercury 5000gv Dmd Projector Users Manual

Related Manuals for Digital Projection Mercury 5000gv Dmd Projector Users Manual

All Digital Projection manuals