Digital Projection Mercury 5000gv Dmd Projector Users Manual

Digital Projection MERCURY 5000gv	8. Using the On-Screen Menus 
Setup 
Setup Page 1 
Selecting Projector Orientation [Orientation] This reorients your image for your type of projection. The 
options are: desktop front projection, ceiling rear projection, 
desktop rear projection, and ceiling front projection. 
Selecting a Color or Logo for Background [Background] Use this feature to display a blue/ black screen or logo 
when no signal is available. The default background is 
"Blue". You can...

8. Using the On-Screen MenusDigital Projection MERCURY 5000gv 
Selecting Operation Mode Set the operation mode of the USB mouse connected to the 
USB port (MOUSE/HUB) on the projector 
Auto ............ Depending on  connection of the USB port 
(PC) on the projector and a USB port (type A) 
on your PC, the USB mouse is operated in the 
following way: 
* When connecting the projector to your PC 
The USB mouse connected to the projector 
can be used as a PC mouse. 
* When not connecting the projector to...

Digital Projection MERCURY 5000gv 8. Using the On-Screen Menus 
Enabling Last Memory [Last Memory] The projector stores the last signal data in memory for each 
input (RGB1, RGB2, DVI DIGITAL, Video, S-Video and Slot 
1/2). 
This feature will reduce switching time between sources. If 
a commercially available switcher is connected, turning on 
this feature may cause the image to appear incorrectly. 
Should this happen, turn this feature off to mute the screen 
during switching. 
Enabling Idle Mode [Idle...

8. Using the On-Screen MenusDigital Projection MERCURY 5000gv 
Disabling the Cabinet Buttons [Control Panel Key Lock] This option turns on or off the Control Panel Key Lock function. 
NOTE: * This Control Panel Key Lock does not affect the remote control
functions. 
* When the cabinet buttons are disabled, pressing and holding theCANCEL button for about 10 seconds will change the setting to 
enable. 
Lamp Settings 
The projector is designed to accept two lamps (dual lamp 
system). 
Lamp Mode This...

Digital Projection MERCURY 5000gv	8. Using the On-Screen Menus 
Link Mode Status Page 
Displaying Current Status of Link Mode When selecting the tab "Status", you will get the following 
dialog box. 
Master ID .................. Indicates the Master projector 
Status  ....................... Indicates the status  of the master 
projector 
Connected PJ ........... Indicates number of connected slave  projectors 
Slave No  ...................  Indicates serial number of the slave 
projector

ID...

8. Using the On-Screen MenusDigital Projection MERCURY 5000gv 
Advanced  Network Type (required for wireless only) 
IP Address 
An IP address can be automatically assigned to this 
projector by your DHCP server. If your network does not 
automatically assign IP address, ask your network 
administrator for an address, and then register it manually. 
Automatic  .... Automatically assigns an IP address to the 
projector from a DHCP server. 
Manual  ......... Provides a space for you to register the IP...

Digital Projection MERCURY 5000gv 8. Using the On-Screen Menus 
WEP (for Wireless only) DHCP 
Select this option whether using the WEP (Wired Equivalent 
Privacy) key for encryption or not. To use encryption, specify 
WEP key. 
Disable ........ Will not turn on the encryption feature. Your 
communications may be monitored by 
someone. 
64bit ............ Uses 64-bit datalength for secure
 transmission.

128bit .......... Uses 128-bit  datalength for secure 
transmission. This option will increase...

8. Using the On-Screen MenusDigital Projection MERCURY 5000gv 
LAN Mode Mail Page  Test Mail: 
Send a test mail to check if your settings are correct. 
NOTE: If you entered an incorrect address in a test, you may not 
receive an Alert mail. Should this happen, check if the Recipient's 
Address is correctly set. 
NOTE: Unless any one of the "Sender's Address", "SMTP Server's 
Name" or "Recipient's Address 1-3" is selected, "Test Mail" is not 
available....

Digital Projection MERCURY 5000gv	8. Using the On-Screen Menus 
Password A password can be set for your projector to avoid operation by 
an unauthorized person. 
There are two password options: one for menu and the other for 
logo. 
When a password is set, doing any one of the following four op

8. Using the On-Screen MenusDigital Projection MERCURY 5000gv 
Security The Security function enables you to protect your projector so 
that the projector will not project a signal unless you enter a key