Digital Projection Mercury 5000gv Dmd Projector Users Manual

7

Using Double Stacking and
Link Mode

○○○○○○○○○○○○○○○○○○\
○○○○○○○○○ ○○○○○○○○○○○○○ 
1 Stacking and Connecting the Projectors  7-2 
2 Adjusting and Registering Signals to Be 
Projected ..................................................  7-5 
3 Adjusting the Lens Shift, Zoom and Focus to 
Clearly Display all projected patter ns  ....  7-5 
4 Link Mode Setting .................................... 7-5 
5 List of Menu Items Available in Link 
Mode ............................................................

7-2
7. Double Stacking and Link Mode
Digital Projection   
MERCURY 5000gv
1 Stacking and Connecting the Projectors
Master projector
Slave projector
NOTE: Up to three units can be gravity stacked without external
support. In some cases, however, two images will not align on the
screen correctly. This will become more apparent when displaying small
text and detailed graphics.
CAUTION: To prevent the projectors from falling, install them in a place and faste\
n
them in a way with sufficient strength to...

7-3
Digital Projection   
MERCURY 5000gv7. Double Stacking and Link Mode
Throw Distances for Optional Lenses
Master projector
Slave projector Throw DistanceScreen center
Refer to the table of throw distances in chapter 2, and ensure that the \
distance between the projectors and the screen is in
the middle part of the recommended range for both lenses.
NOTE: The optional lenses for this projector have different geometrical distor\
tions in wide zoom and tele. Select the best zoom position for...

7-4
7. Double Stacking and Link Mode
Digital Projection   
MERCURY 5000gv
Hookup
1. Use commercially available RGB signal cables to connect the RGB outpu\
t of the master projector to the RGB input of the
slave projector until all the projectors are connected.
2. Next, using a commercially available, bi-directional RS-232C cable co\
nnect the PC CONTROL OUT terminal of the master projector to the PC CONTROL IN terminal of the slave projector until all\
 the projectors are connected.
3. Turn all the...

2
Digital Projection MERCURY 5000gv 7. Double Stacking and Link Mode 
Adjusting and Registering Signals to Be Projected 
1. Display a desired input signal on the master projector. 
2. Make adjustment to the signal, then save (register) adjustments on the master projector by pressing and 
holding CTL and pressing ENTRY LIST button on the remote 
control. 
3. Repeat steps 1. and 2. for all signals you want to project. Display all the signals you registered and check. To check, 
select [Source Select]...

5
7. Double Stacking and Link ModeDigital Projection MERCURY 5000gv 
List of Menu Items Available in Link Mode 
Available Menu Items NOTE 
Source Select *1 
Sound 
Menu 
Link Mode 
On/Off Timer 
Sleep Timer 
Source Information 
Projector Information 
Direct Button NOTE 
LENS SHIFT Projector *2 
FOCUS Projector *2 
Remote Control *2 
ZOOM Projector *2 
Remote Control *2 
"MENU/SELECT/ 
ENTER/CANCEL" 
Projector 
Remote Control 
POWER Projector *3 
POWER ON Remote Control *3 
POWER OFF Remote...

8

Using the On-Screen Menus

○○○○○○○○○○○○○○○○○○\
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○\
○○○○○○○○ 
1
2
3
4
 Basic Menu Operation........  8-2
Projector Options .................................................. 8-13

List of Direct Button
Setup ..................................................................... 8-15

Combinations .....................  8-3
Lamp Settings ....................................................... 8-18

Menu tree ........................... 8-4
LAN Mode...

1
8. Using the On-Screen MenusDigital Projection MERCURY 5000gv 
Basic Menu Operation 
Using the Menus NOTE: The on-screen menu may not be displayed correctly while 
interlaced motion video image is projected. 
1. Press the MENU button on the remote control or projector cabinet to 
display the Basic, Advanced or Custom Menu. 
MENU/ADDRESS 
NOTE: When using a USB mouse, click the mouse button to display 
the menu. For other operations, do the same way as you use your PC 
mouse. 
2. Press the SELECT...

2
Digital Projection MERCURY 5000gv 8. Using the On-Screen Menus 
List of Direct Button Combinations 
CTL+  Input  (1-10) Switches to any selected signal found in the Entry List.

To enable this combination, you must first assign specific remote buttons\

for direct input selection in the Entry Edit window.

CTL+  ENTER (While  displaying  Entry  list) Displays the selected signal. 
CTL+  CANCEL Returns  to  the previous menu without closing the slidebar or dialog. 
CTL+  UNDO Clears all menus or...

8-4
8. Using the On-Screen Menus
Digital Projection   
MERCURY 5000gv
3 Menu tree
NOTE: The item appears dimmed on the menu, it is unavailable.