Digital Projection Mercury 5000gv Dmd Projector Users Manual

2

Installation

○○○○○○○○○○○○○○○○○○\
○○○○○○○○○○○○○○○○○○○○○○ 
1 Setting Up Your Projector ........................ 2-2

Screen Size and Projection Distance .......................................................... 2-2

2 Lens Shift Adjustable Range ................... 2-4

Optional Lens Installation ....................... 2-5

Making Connections ................................ 2-6

3
4
Connecting Your PC or Macintosh ............................................................... 2-6

To connect Scart...

----
----
----
----
----
----
----
----
----
----
--------
----
----
----
----
----
----
----
----
----
----
1
2. Installation	
Digital Projection   MERCURY 5000gv 
This chapter describes how to set up your projector and how to connect v\
ideo and audio sources. 
 Setting Up Your Projector 
Your Projector is simple to set up and use. But before you get started, you must first: 
1.  Determine the image size	 4.  Connect the supplied power cable. 
2. Set up a screen or select a non-glossy white wall onto...

---- ----
---- ----
---- -------- -------- ----
---- ----
---- ----
---- ----
---- ----
---- ----
---- ----
---- ----
---- ----
---- ----
---- ---- ---- ----
---- ----
---- ----
---- ----
---- ----
---- ----
---- ----
---- ----
---- ---- ---- ----
---- ----
---- ----
---- ----
Digital Projection MERCURY 5000gv	2. Installation 
Table of Throw Distances and Screen Sizes for Optional Zoom Lenses NOTE: applicable to XGA and all wide-screen formats that use the full wi\
dth of the DMD™. 
NOTE: Actual throw...

2-4
2. Installation
Digital Projection   
MERCURY 5000gv
Desktop Mounting
Ceiling Mounting Normal projection position
2 Lens Shift Adjustable Range
The diagram shows the location of the image position in the lens. The le\
ns can be shifted within the shaded area as shown
using the normal projection position as a starting point.
Maximum Possible Range 
(fixed lens 001-734 shown in brackets)(fixed lens 001-735 to be confi\
rmed):
Up: 0.5 H (

3
Digital Projection MERCURY 5000gv	2. Installation 
Optional Lens Installation 
This section describes how to install the lens. 
Before installation *	Determine the optional lens to be used to obtain a desired projection di\
stance. There are six optional lenses available: 
0.8 : 1 fixedpart no. 001-734 
1.2 : 1 fixedpart no. 001-735 
1.5 - 1.8 : 1 zoom part  no.  001-736 
1.8 - 2.25 : 1 zoom part  no.  001-737 
2.25 - 3.0 : 1 zoom part  no.  001-738 
3.0 - 4.5 : 1 zoom part  no.  001-739 
4.5 - 7.0...

2-6
2. Installation
Digital Projection   
MERCURY 5000gv
4 Making Connections
NOTE: When using with a notebook PC, be sure to connect between the proj\
ector and the notebook PC before turning on the power to the
notebook PC. In most cases signal cannot be output from RGB output unles\
s the notebook PC is turned on after connecting with the projector.
* If the screen goes blank while using your remote control, it may be th\
e result of the computer's screen-saver or power management software.
* If...

2-7
Digital Projection   
MERCURY 5000gv2. Installation
To connect SCART output (RGB)
Before connections: An exclusive SCART adapter (ADP-
SC1) and a commercially available SCART cable are
required for this connection.
NOTE:
• Audio signal is not available for this connection.
• The RGB 1 IN connector does not support Plug & Play.
Video equipment
such as DVD
player
Projector
ADP-SC1Commercially available
SCART cable
Female
1. Turn off the power to the projector and your video equipment.
2. Use the...

2-8
2. Installation
Digital Projection   
MERCURY 5000gv
Connecting Your DVD Player
DVD player
You can connect your projector to a DVD player with
component output or Video output. To do so, simply:
1. Turn off the power to your projector and DVD player.
2. If your DVD player has the component video (Y,Cb,Cr) output, use acommercially available component video cable (RCAX3) and the
optional 15-pin-to-RCA (female) x 3 cable to connect your DVD player
to the RGB 1 IN or 2 IN connector on the projector....

2-9
Digital Projection   
MERCURY 5000gv2. Installation
VCR/ Laser disc player
Connecting Your VCR or Laser Disc Player
Audio equipment
S-video cable (not supplied)
Video cable (not supplied)
Audio cable (not supplied)
Use common RCA cables (not provided) to connect your
VCR, laser disc player or document camera to your projector.
To make these connections, simply:
1. Turn off the power to the projector and VCR, laser disc player or document camera.
2. Connect one end of an RCA cable (not supplied) to...

2-10
2. Installation
Digital Projection   
MERCURY 5000gv
Connecting to a Network
With the LAN connection, you can control the projector over the network \
using a computer to switch the unit on/off, select the
input and others.
* To control the projector over the network using a computer, use the Dynamic Image Utility 2.0 contained on the User Supportwar e CD-ROM or
the HTTP Server feature.
* With the Image Express Utility 1.0 contained on the supplied User Suppor\
tware CD-ROM, you can project your PC...