Digital Projection Mercury 5000gv Dmd Projector Users Manual

6

Using the Projector in a Network

○○○○○○○○○○○○○○○○○○\
○○○○○○○○○○○○○○○○○○○○○○ 
1 Introduction ............................................. 6-2

 Supported Equipment .............................. 6-3

Equipment Connections and Settings .... 6-4

Software Installation ............................... 6-5

 Starting/Exiting the Software .................. 6-6

 Troubleshooting ....................................... 6-7

2
3
4
5
6 

6. Using the Projector in a NetworkDigital Projection MERCURY 5000gv 
1 Introduction 
Thank you for your purchase of the Digital Projection portable 
projector (hereafter referred to as "unit" or "projector"). 
This projector is connected to a personal computer or other equip

2
Digital Projection MERCURY 5000gv 6. Using the Projector in a Network 
 Suppor ted Equipment 
Operating Environment 
Supported Equipment IBM PC/AT compatible computers 
• CD-ROM drive a requirement (at time of installation) 
CPU Pentium MMX processor or higher a requirement 
Pentium III 800 MHz or higher recommended 
Memory For Windows XP • 128 MB or more a requirement 
• 192 MB or more recommended 
For other operating systems • 64 MB or more a requirement 
• 128 MB or more recommended 
* More memory...

3
6. Using the Projector in a NetworkDigital Projection MERCURY 5000gv 
Equipment Connections and Settings 
When Using a Network Environment 
What Can Be Accomplished •	Using Image Express Utility 1.0, the screen image displayed by the 
personal computer can be sent to the projector and then projected to 
a screen. 
•	Using Dynamic Image Utility 2.0, a picture or slide can be sent to the projector and then projected to a screen. 
•	Using the projector control function of Dynamic Image Utility 2.0...

Digital Projection MERCURY 5000gv 6. Using the Projector in a Network 
4 Software Installation 7.  Now, follow the operations described in the screen messages. When the uninstall procedure is completed, there will be a return to 
the "Add/Remove Programs Properties" screen. 
NOTE • Windows 98 operations will be described in examples given here.  8. Click [OK]. • When using Windows 2000, please perform software installation/  There will be a return to the "Control Panel" screen...

5
6. Using the Projector in a NetworkDigital Projection MERCURY 5000gv 
 Starting/Exiting the Software 
Dynamic Image Utility 2.0 
Star t the Software 
Preparation:

Install the software on the personal computer from the supplied

CD-ROM. (Page 6-6)

The software cannot be started from the supplied CD-ROM.

From the [Start] menu click [Program] →[Projector User

Supportware] → [Dynamic Image Utility 2.0].

Dynamic Image Utility 2.0 will start.

Reference
•	By selecting a PowerPoint file with Dynamic...

6
Digital Projection MERCURY 5000gv 6. Using the Projector in a Network 
 Troubleshooting 
In this section, the software names have been abbreviated as follows:

Dynamic Image Utility 2.0 to DIU 2.0, Viewer PPT Converter 2.0 to PPTC 2.0, and Image Express Utility 1.0 to IEU 1.0.

 Installation does not complete normally.

Check Points Countermeasures 
When using Windows 2000, did you log on with "Administra-When using Windows 2000 or Windows XP, log on with the tors" authority? When using...

6. Using the Projector in a NetworkDigital Projection MERCURY 5000gv 
 Projection to the screen is not possible when using the LAN environment\
. (DIU 2.0, IEU 1.0) 
Check Points Countermeasures 
Have LAN cards (i.e., adapters) been put into both the personal Put LAN cards (i.e., adapters) into both the personal computer computer and the projector? and the projector. 
Have the LAN settings (for both the personal computer and the Perform the LAN settings for both the personal computer and projector) been...

Digital Projection MERCURY 5000gv 6. Using the Projector in a Network 
 The projector cannot be found with "General search". (IEU 1.0) 
Check Points Countermeasures 
Are the wireless LAN settings appropriate? Please check the access points, the personal computer setting Are the channel numbers for the personal computer and the values and the projector [LAN Mode] setting values. projector set to the same number? When using the infrastructure or 802.11 Ad Hoc, please set to 
When WEP (encryption)...

6. Using the Projector in a NetworkDigital Projection MERCURY 5000gv 
6-10