Digital Projection Lightning 35hd-T, 40hd-t User Manual

105-453B January 2007  Page 4.19
Digital Projection LIGHTNING 35HD-T, 40HD-T User Manual  4. Using the Menus
Notes
 The Image Orientation controls 
allow the projected image to 
be fl ipped for rear or refl ected 
projection, or to correct for 
incorrectly oriented images.
DMD
Image orientation
Press the IMAGE ORIENTATION button on the Advanced image menu:
Choose from:
FLIP HORIZONTAL
Horizontal inverts the image left to right for rear projection.
FLIP VERTICAL
Vertical inverts the image top to bottom for...

Page 4.20  105-453B January 2007
4. Using the Menus  Digital Projection LIGHTNING 35HD-T, 40HD-T User Manual
Notes
  The buttons of the Main menu 
are always visible at the bottom 
of the display.
  To go back to a previous menu 
option that is no longer visible, 
call up the menu again using 
the appropriate Main menu 
button.
  For information about how 
to connect the projector, see 
Connecting the projector 
in section 2. Installation, 
and Connections in section 
6. Appendix.
  To control more than...

105-453B January 2007  Page 4.21
Digital Projection LIGHTNING 35HD-T, 40HD-T User Manual  4. Using the Menus
Notes
 Do not make changes to the 
networking confi guration 
unless you understand what 
you are doing, or have taken 
advice from your Network 
Manager.
  If you make a mistake, it is 
possible that you will lose 
contact with the projector.
  Always double-check your 
settings before pressing the 
APPLY button.
  Always keep a written note of 
the original settings, and any 
changes you have...

Page 4.22  105-453B January 2007
4. Using the Menus  Digital Projection LIGHTNING 35HD-T, 40HD-T User Manual
Notes
 Do not make changes to the 
networking confi guration 
unless you understand what 
you are doing, or have taken 
advice from your Network 
Manager.
  If you make a mistake, it is 
possible that you will lose 
contact with the projector.
  Always double-check your 
settings before pressing the 
APPLY button.
  Always keep a written note of 
the original settings, and any 
changes you have...

105-453B January 2007  Page 4.23
Digital Projection LIGHTNING 35HD-T, 40HD-T User Manual  4. Using the Menus
Notes
 Do not make changes to the 
networking confi guration 
unless you understand what 
you are doing, or have taken 
advice from your Network 
Manager.
  If you make a mistake, it is 
possible that you will lose 
contact with the projector.
  Always double-check your 
settings before pressing the 
APPLY button.
  Always keep a written note of 
the original settings, and any 
changes you have...

Page 4.24  105-453B January 2007
4. Using the Menus  Digital Projection LIGHTNING 35HD-T, 40HD-T User Manual
Notes
  The buttons of the Main menu 
are always visible at the bottom 
of the display.
  To go back to a previous menu 
option that is no longer visible, 
call up the menu again using 
the appropriate Main menu 
button.
  Touchscreen calibration should 
not normally be necessary 
except after many hours of 
heavy use.
Confi g menu
Menu buttons...
Networking confi g
Detailed status
Touchscreen...

105-453B January 2007  Page 4.25
Digital Projection LIGHTNING 35HD-T, 40HD-T User Manual  4. Using the Menus
Notes
 Software update should NOT 
be carried out except by, 
or with the supervision of, 
Digital Projection Service 
personnel.
Engineering & Maintenance 
menu
Controls
Log fi les
Menu buttons...
Software update
Engineering & Maintenance menu
Press the ENGINEERING & MAINTENANCE button on the Main menu:
Log fi les
A single log fi le is created for each day that the projector is switched on. There...

Page 4.26  105-453B January 2007
4. Using the Menus  Digital Projection LIGHTNING 35HD-T, 40HD-T User Manual 

105-453B January 2007  Page 5.1
5. Maintenance
Contents
Changing the lamp ............................................................................................................................. 5.2
Readind the lamp-hours meter ........................................................................................................... 5.3
Removing the lamp module ............................................................................................................... 5.4
Fitting the new lamp...

Page 5.2  105-453B January 2007
5. Maintenance  Digital Projection LIGHTNING 35HD-T, 40HD-T User Manual
Changing the lamp
The lamp should be changed after 750 hours of use, as indicated on the lamp -hours 
meter. The meter is located on the front of the lamp module, and is accesible inside 
the lamp compartment door.
To open the lamp compartment door:
Give the catch half a turn anti-clockwise, to release the catch. •
Notes
 Always allow the lamp to 
cool for 5 minutes before 
removing the lamp module....