Digital Projection Lightning 35hd-T, 40hd-t User Manual

105-453B January 2007  Page 4.9
Digital Projection LIGHTNING 35HD-T, 40HD-T User Manual  4. Using the Menus
Lens menu
Press the LENS button on the Main menu:
Move, zoom and focus
To adjust the move, zoom and focus settings, press the MOVE, ZOOM and FOCUS 
arrow heads.
Lens movements will start slowly, then speed up as the button is held. To make fi ne 
adjustments therefore, use a number of short presses.
Shutter open/closed
Press the SHUTTER OPEN or SHUTTER CLOSE button.
Centre
To centre the lens, press...

Page 4.10  105-453B January 2007
4. Using the Menus  Digital Projection LIGHTNING 35HD-T, 40HD-T User Manual
Notes
  The buttons of the Main menu 
are always visible at the bottom 
of the display.
  To go back to a previous menu 
option that is no longer visible, 
call up the menu again using 
the appropriate Main menu 
button.
 When Test patterns are 
selected, the actual colours 
displayed  may depend on 
the settings of the contrast,  
brightness and gamma controls.
  It may be necessary to set all...

105-453B January 2007  Page 4.11
Digital Projection LIGHTNING 35HD-T, 40HD-T User Manual  4. Using the Menus
Notes
 When Test patterns are 
selected, the actual colours 
displayed  may depend on 
the settings of the contrast,  
brightness and gamma controls.
  It may be necessary to set all 
brightness controls to 0.0, and 
all contrast controls to 1.0, 
before making any light level 
measurements.Alignment pattern
Horizontal ramp
Vertical ramp
Checker board
Shutter open/closed
Press the SHUTTER OPEN or...

Page 4.12  105-453B January 2007
4. Using the Menus  Digital Projection LIGHTNING 35HD-T, 40HD-T User Manual
Notes
  The buttons of the Main menu 
are always visible at the bottom 
of the display.
  To go back to a previous menu 
option that is no longer visible, 
call up the menu again using 
the appropriate Main menu 
button.
  The contrast, brightness and 
gamma controls in the Image 
menu are all interactive, so 
settings made with one control 
may directly affect the setting of 
another control....

105-453B January 2007  Page 4.13
Digital Projection LIGHTNING 35HD-T, 40HD-T User Manual  4. Using the Menus
Notes
  The contrast, brightness and 
gamma controls in the Image 
menu are all interactive, so 
settings made with one control 
may directly affect the setting of 
another control.
  All these controls allow extreme 
settings to be made. However, 
in normal use, it should never 
be necessary to set any of the 
controls far from midpoint.
  If in doubt, reset the contrast, 
brightness and gamma...

Page 4.14  105-453B January 2007
4. Using the Menus  Digital Projection LIGHTNING 35HD-T, 40HD-T User Manual
Notes
  The buttons of the Main menu 
are always visible at the bottom 
of the display.
  To go back to a previous menu 
option that is no longer visible, 
call up the menu again using 
the appropriate Main menu 
button.
  The contrast, brightness and 
gamma controls in the Image 
menu are all interactive, so 
settings made with one control 
may directly affect the setting of 
another control....

105-453B January 2007  Page 4.15
Digital Projection LIGHTNING 35HD-T, 40HD-T User Manual  4. Using the Menus
Notes
  The buttons of the Main menu 
are always visible at the bottom 
of the display.
  To go back to a previous menu 
option that is no longer visible, 
call up the menu again using 
the appropriate Main menu 
button.
 The Input adjust controls allow 
you to select which portion 
of the video image is to be 
displayed.
  These controls DO NOT change 
the position or size of the whole 
image on...

Page 4.16  105-453B January 2007
4. Using the Menus  Digital Projection LIGHTNING 35HD-T, 40HD-T User Manual
Notes
 The Input adjust controls allow 
you to select which portion 
of the video image is to be 
displayed.
  These controls DO NOT change 
the position or size of the whole 
image on the projection screen.
  To change the position or size 
of the whole image on the 
projection screen, use the Move 
and Zoom controls in the Lens 
menu.
  Note how the Input window 
controls change the size of the...

105-453B January 2007  Page 4.17
Digital Projection LIGHTNING 35HD-T, 40HD-T User Manual  4. Using the Menus
Input pan
Press the arrow heads to pan the video image within the window, as shown on the 
next page.
OR
Press on 0,0 in the middle of the Input pan arrows, to pan to the centre of the 
image.
Example
Input window:
width and height 
reduced
(see previous 
page)
Input pan:
image moved 
down and left 
DMD
Notes
 The Input adjust controls allow 
you to select which portion 
of the video image is to...

Page 4.18  105-453B January 2007
4. Using the Menus  Digital Projection LIGHTNING 35HD-T, 40HD-T User Manual
Notes
  The buttons of the Main menu 
are always visible at the bottom 
of the display.
  To go back to a previous menu 
option that is no longer visible, 
call up the menu again using 
the appropriate Main menu 
button.
 The Image position controls 
are useful for multiple projector 
applications, where the images 
need to be tiled.
 The Image position controls 
affect how the selected video...