Digital Projection E-Vision 8000 Series User Guides

Digital Projection E-Vision 8000 series  THE OPERATION COMMANDS Remote Communications Guide
Page Rem_6
...continued from previous page
Notes
LAMPS menu
lamps= ?0 = Single
1 = Dual
Not applicable when lamp is cooling.
lamp.mode= ?0 = Economy
1 = Standard
2 = Dimming
Drive
Not applicable without signal locked.
lamp.pwr= ?0 ~ 25 ( 80.4 % ~ 100.0 % )Not applicable without signal locked.
altitude= ?0 = Off
1 = On
High Altitude
lamp1.stat?0 = Off
1 = On
lamp2.stat?0 = Off
1 = On
ALIGNMENT menu
proj.mode= ?0 =...

Digital Projection E-Vision 8000 series  THE OPERATION COMMANDS Remote Communications Guide
Page Rem_7
...continued from previous page
Notes
h.keystone= ? + --350 ~ +350The sum of the absolute values of h.keystone and 
v.keystone cannot be greater than 350.
v.keystone= ? + --200 ~ +200The sum of the absolute values of h.keystone and 
v.keystone cannot be greater than 350.
warp.rotat= ? + --20 ~ +20Each unit is ¼°. 
warp.pinbrl= ? + --100 ~ +100Pincushion/Barrel
warp.tlc.x
warp.tlc.y
= ? + -x: -192 ~...

Digital Projection E-Vision 8000 series  THE OPERATION COMMANDS Remote Communications Guide
Page Rem_8
...continued from previous page
Notes
eb.blk.btm= ? + -0, 8, 16, 24, 32Black Level Uplift Area Bottom
eb.blk.left= ? + -0, 4, 8, 12, 16, 20, 24, 28, 32Black Level Uplift Area Left
eb.blk.right= ? + -0, 4, 8, 12, 16, 20, 24, 28, 32Black Level Uplift Area Right
eb.all= ? + -0 ~ 32Black Level Uplift Adjust Width All
eb.red= ? + -0 ~ 32Black Level Uplift Adjust Width Red
eb.green= ? + -0 ~ 32Black Level...

Digital Projection E-Vision 8000 series  THE OPERATION COMMANDS Remote Communications Guide
Page Rem_9
...continued from previous page
Notes
trig.1= ?0 = 5:4
1 = 4:3
2 = 16:10
3 = 16:9
4 = 1.88
5 = 2.35
6 = Letterbox
7 = Native
8 = Unscaled
9  = Auto
If trig.1 is set to Auto, the projector will start 
sending the trigger as soon as it is switched on. 
Otherwise the trigger will be sent only when the 
aspect ratio matches this setting.
auto.src= ?0 = Off 
1 = On
Auto Search
dblack= ?0 = Off
1 = On
Dynamic...

Digital Projection E-Vision 8000 series  THE OPERATION COMMANDS Remote Communications Guide
Page Rem_10
...continued from previous page
Notes
pip.src?0 = HDMI
1 = DVI
2 = VGA
3 = Component / BNC
4 = Composite
5 = S-Video
6 = 3G-SDI
PIP Source
pixel.clock?In MHz
Not applicable without signal locked.
signal?Not applicable without signal locked.
h.refresh?Not applicable without signal locked.
v.refresh?Not applicable without signal locked.
lamp1.hours?
lamp2.hours?
proj.runtime?
blue.only= ?0 = Off
1 = On...

Digital Projection E-Vision 8000 series  THE KEY COMMANDS Remote Communications Guide
Page Rem_11
The Key Commands
Corresponding remote control key
power.onPOWER ON
power.offPOWER OFF
menuMENU
exitEXIT
inputINPUT
picturePICTURE
networkNETWORK
autosyncAUTO SYNC
aspectASPECT
pipPIP
overscanOVERSCAN
freezeFREEZE
lampmodeLAMP MODE
infoINFO
shutterSHUTTER
idsetID SET
lensshiftLENS SHIFT
testpatternTEST PATTERN
enterENTER
upUP
downDOWN
leftLEFT
rightRIGHT
Notes
 An input command will return 
“NA” when the...

Digital Projection E-Vision 8000 series  WEB CONFIGURATION UTILITY Remote Communications Guide
Page Rem_12
Web Configuration Utility
The LAN IP Address of the projector can be set remotely using the Web Configuration Utility.
• Make sure the projector is connected to a remote computer via LAN.
• From the remote computer, access the default LAN IP address of the projector. The Web Configuration Utility opens.
It is possible to control many of the projector’s settings using the embedded Web Configuration...

Digital Projection E-Vision 8000 series  WEB CONFIGURATION UTILITY Remote Communications Guide
Page Rem_13
Examples - continued from previous page
The Image settings page allows access to settings from the 
Picture menu.
The Lens adjustments page allows access to lens control 
settings. 
Notes 
Rev B September 2012  

Digital Projection E-Vision 8000 series  WEB CONFIGURATION UTILITY Remote Communications Guide
Page Rem_14
Examples - continued from previous page
The Geometry adjust and Edge Blend pages allow access to 
settings from the Alignment menu.
Notes 
Rev B September 2012  

Digital Projection E-Vision 8000 series  WEB CONFIGURATION UTILITY Remote Communications Guide
Page Rem_15
Examples - continued from previous page
The Advanced control page allows access to settings 
from the Picture menu, Color sub-menu.
To view and edit your network settings, navigate to 
the Configuration tab.
Notes 
Rev B September 2012