Digital Projection E-Vision 8000 Series User Guides

USER GUIDES
INSTALLATION AND QUICK-START GUIDE 
CONNECTION GUIDE 
OPERATING GUIDE 
REMOTE COMMUNICATIONS GUIDE
112-796B
E-Vision 8000 Series
High Brightness Digital Video Projector
Rev B September 2012  

Digital Projection E-Vision series ABOUT THESE GUIDES
About these Guides
Please read this guide carefully before using the projector, and keep it handy for future reference.
A serial number is located on the back of the projector. Record it here: 
Symbols used in these guides
Warnings
 ELECTRICAL WARNING: this symbol indicates that there is a danger of electrical shock\
 unless the instructions are closely 
followed.
 WARNING: this symbol indicates that there is a danger of physical injury \
to yourself...

E-Vision 8000 Series
High Brightness Digital Video Projector
INSTALLATION AND QUICK-START GUIDE
Rev B September 2012  

Digital Projection E-Vision 8000 series  CONTENTS Installation and Quick-Start Guide
CONTENTS
What’s in the Box? ........................................................................\
.......Inst_1
Getting to Know the Projector....................................................Inst_2
Front and rear views .............................................................................Inst_2
Remote control ......................................................................................Inst_2
Control...

Digital Projection E-Vision 8000 series  WHAT'S IN THE BOX? Installation and Quick-Start Guide
Page Inst_1
What’s in the Box?Notes
 Make sure your box contains 
everything listed. If any pieces are 
missing, contact your dealer.
 You should save the original box 
and packing materials, in case you 
ever need to ship your projector.
 An RYGCWB color wheel, optimized 
for brightness, is fitted as standard. 
Use the RGBCMY color wheel for 
optimized color.
 Only one power cable - dependent 
on the...

Digital Projection E-Vision 8000 series  GETTING TO KNOW THE PROJECTOR Installation and Quick-Start Guide
Page Inst_2
Getting to Know the Projector
Front and rear views
Notes
 The projector can use an infra-red or 
a wired remote control.
  Some of the controls are duplicated 
on the projector control panel, as 
shown on the next page.
 For full details of how to use the 
controls and the menu system, see 
the Operating Guide.
 The air filters should be cleaned or 
changed regularly, depending on the...

Digital Projection E-Vision 8000 series  GETTING TO KNOW THE PROJECTOR Installation and Quick-Start Guide
Page Inst_3
Control panel
Some of the controls from the remote control are duplicated on the proje\
ctor control panel, as 
shown below.
The EXIT button has the same function as the RETURN button on the remote control.
Notes
 For full details of how to use the 
controls and the menu system, see 
the Operating Guide.
Indicators
SHUTTER off = OPEN green = CLOSED
TEMP off = NO ERROR  flashing red =...

Digital Projection E-Vision 8000 series  CHANGING THE LENS, LAMPS, FILTERS AND COLOUR WHEEL Installation and Quick-Start Guide
Page Inst_4
Changing the lens, lamps, filters and color wheel
Removing the lens
• Push in the lens release lever, and turn the lens anti-clockwise.
• Remove the lens.
Fitting the lens
• Remove the lens cap.
• Position the lens so that the labels are at the top, and gently insert i\
t all the way into the 
lens mount.
• Push the lens in firmly, and turn it clockwise until it...

Digital Projection E-Vision 8000 series  CHANGING THE LENS, LAMPS, FILTERS AND COLOUR WHEEL Installation and Quick-Start Guide
Page Inst_5
Changing a lamp
• Unscrew the two captive screws securing the cover for the lamp that need\
s changing.
• Open the lamp compartment.
• Unscrew the three captive screws securing the lamp module.
• Pull firmly on the handle to remove the lamp module.
• Insert a new lamp module and fasten the screws.
• Replace the lamp compartment cover and fasten the screws.
Notes...

Digital Projection E-Vision 8000 series  CHANGING THE LENS, LAMPS, FILTERS AND COLOUR WHEEL Installation and Quick-Start Guide
Page Inst_6
Changing the color wheel
• Unscrew the captive screw securing the 
color wheel compartment cover.
• Open the color wheel compartment.
• Unscrew the four captive screws securing 
the color wheel.
• Remove the color wheel.
• Insert a new color wheel and fasten the 
screws.
• Replace the cover and fasten the screw.
Cover 
screw
Color wheel 
compartment
Color 
wheel...