Digital Projection E-Vision 8000 Series User Guides

							USER GUIDES
INSTALLATION AND QUICK-START GUIDE 
CONNECTION GUIDE 
OPERATING GUIDE 
REMOTE COMMUNICATIONS GUIDE
112-796B
E-Vision 8000 Series
High Brightness Digital Video Projector
Rev B September 2012  
						

							Digital Projection E-Vision series ABOUT THESE GUIDES
About these Guides
Please read this guide carefully before using the projector, and keep it handy for future reference.
A serial number is located on the back of the projector. Record it here: 
Symbols used in these guides
Warnings
 ELECTRICAL WARNING: this symbol indicates that there is a danger of electrical shock\
 unless the instructions are closely 
followed.
 WARNING: this symbol indicates that there is a danger of physical injury \
to yourself and/or damage to the equipment unless 
the instructions are closely followed.
Notes
  NOTE: this symbol indicates that there is some important information tha\
t you should read.
Product revision
Because we at Digital Projection continually strive to improve our products, we may change specifications and designs, and add new features 
without prior notice. Projectors built prior to this revision of the Ope\
rating Guide may therefore not include all the features described.
Rev B September 2012  
						

							E-Vision 8000 Series
High Brightness Digital Video Projector
INSTALLATION AND QUICK-START GUIDE
Rev B September 2012  
						

							Digital Projection E-Vision 8000 series  CONTENTS Installation and Quick-Start Guide
CONTENTS
What’s in the Box? ........................................................................\
.......Inst_1
Getting to Know the Projector....................................................Inst_2
Front and rear views .............................................................................Inst_2
Remote control ......................................................................................Inst_2
Control panel  .........................................................................................Inst_3
Indicators ...............................................................................................Inst_3
Changing the lens, lamps, filters and color wheel  .......Inst_4
Removing the lens  ................................................................................Inst_4
Fitting the lens .......................................................................................Inst_4
Changing a lamp  ...................................................................................Inst_5
Changing the filters ...............................................................................Inst_5
Changing the color wheel .....................................................................Inst_6
Positioning the Screen and Projector ....................................Inst_7
Operating the Projector ...................................................................Inst_8
Switching the Projector On  ..................................................................Inst_8
Selecting an Input Signal or Test Pattern ...........................................Inst_8
Input signal ....................................................................................Inst_8
Test pattern ...................................................................................Inst_8
Adjusting the Lens ................................................................................Inst_9
Zoom  .............................................................................................Inst_9
Focus  ............................................................................................Inst_9
Shift ...............................................................................................Inst_9
Adjusting the Image ..............................................................................Inst_9
Orientation.....................................................................................Inst_9
Aspect Ratio ..................................................................................Inst_9
Picture ...........................................................................................Inst_9
Switching the Projector Off ................................................................Inst_10
Rev B September 2012  
						

							Digital Projection E-Vision 8000 series  WHAT'S IN THE BOX? Installation and Quick-Start Guide
Page Inst_1
What’s in the Box?Notes
 Make sure your box contains 
everything listed. If any pieces are 
missing, contact your dealer.
 You should save the original box 
and packing materials, in case you 
ever need to ship your projector.
 An RYGCWB color wheel, optimized 
for brightness, is fitted as standard. 
Use the RGBCMY color wheel for 
optimized color.
 Only one power cable - dependent 
on the destination territory - will be 
supplied with the projector.
Remote control 
(112-532)
2x AA batteries
User Guides on CD 
(112-456)
Important Information 
(112-797)
Projector
Lens cap
Power cable, 
China  
(112-817)
Power cable, 
United Kingdom 
(112-814)
Power cable, 
Europe 
(112-816)
Power cable, 
North America 
(112-815)
RGBCMY color  wheel 
Rev B September 2012  
						

							Digital Projection E-Vision 8000 series  GETTING TO KNOW THE PROJECTOR Installation and Quick-Start Guide
Page Inst_2
Getting to Know the Projector
Front and rear views
Notes
 The projector can use an infra-red or 
a wired remote control.
  Some of the controls are duplicated 
on the projector control panel, as 
shown on the next page.
 For full details of how to use the 
controls and the menu system, see 
the Operating Guide.
 The air filters should be cleaned or 
changed regularly, depending on the 
installation environment.
  The filters should be changed at the 
same time as the lamp is changed.
 The projector lens is shipped 
separately.
LensConnection 
panel
Mains 
input
Control 
panel
Adjustable 
feet
Front 
infra-red 
window
Rear 
infra-red 
window
̶ 
231
564
897
0
ENTER
FOCUSTEST
PATTERN+
EXIT
MENU
ON
POWER OFF
̶ 
ZOOM
+
LENSSHIFT
INPUTPICTURENETWORK
AUTO SYNCASPECTPIP
OVERSCANFREEZE
INFO.̶ 
LAMPMODE
LIGHT
CLEARSHUTTERIDSET
Remote control
Infra-red 
reception
40°
40°
Air 
inlet
Air 
inlet
Air 
outlets
Color wheel 
cover
Air filter 
cover
Air filter 
cover
Lamp 
covers
Indicator 
panel 
Rev B September 2012  
						

							Digital Projection E-Vision 8000 series  GETTING TO KNOW THE PROJECTOR Installation and Quick-Start Guide
Page Inst_3
Control panel
Some of the controls from the remote control are duplicated on the proje\
ctor control panel, as 
shown below.
The EXIT button has the same function as the RETURN button on the remote control.
Notes
 For full details of how to use the 
controls and the menu system, see 
the Operating Guide.
Indicators
SHUTTER off = OPEN green = CLOSED
TEMP off = NO ERROR  flashing red = ERROR (temperature)
LAMPS 1,2 off = OFF
 flashing red = LAMP ERROR red = END OF LIFE
 flashing green  = LAMP WARM-UP  green = ON
STATUS off = NO ERROR
 flashing red (1 flash) = COVER OPEN flashing red (4 flashes) = FAN ERROR
 red = SYSTEM ERROR
POWER off = NO POWER
 green = normal RUNNING mode red = STANDBY mode
 flashing green = PROJECTOR WARM UP
 flashing amber = PROJECTOR COOL DOWN  
Rev B September 2012  
						

							Digital Projection E-Vision 8000 series  CHANGING THE LENS, LAMPS, FILTERS AND COLOUR WHEEL Installation and Quick-Start Guide
Page Inst_4
Changing the lens, lamps, filters and color wheel
Removing the lens
• Push in the lens release lever, and turn the lens anti-clockwise.
• Remove the lens.
Fitting the lens
• Remove the lens cap.
• Position the lens so that the labels are at the top, and gently insert i\
t all the way into the 
lens mount.
• Push the lens in firmly, and turn it clockwise until it clicks into place.
Notes
 The projector lens is shipped 
separately. 
Rev B September 2012  
						

							Digital Projection E-Vision 8000 series  CHANGING THE LENS, LAMPS, FILTERS AND COLOUR WHEEL Installation and Quick-Start Guide
Page Inst_5
Changing a lamp
• Unscrew the two captive screws securing the cover for the lamp that need\
s changing.
• Open the lamp compartment.
• Unscrew the three captive screws securing the lamp module.
• Pull firmly on the handle to remove the lamp module.
• Insert a new lamp module and fasten the screws.
• Replace the lamp compartment cover and fasten the screws.
Notes
 Always allow the lamp to cool for 
5 minutes before:
  - disconnecting the power 
- moving the projector 
- changing the lamp
 The lamp and color wheel must 
be changed only by suitably 
qualified personnel.
  The projector will shut down if any 
of the covers are opened whilst in 
operation.
 The filters should be changed at the 
same time as the lamp is changed.
Lamp 1Lamp 2
Cover 
screws
Lamp compartment
Lamp module 
screws
Lamp 1Lamp 2
Handle
Changing the filters
• Unscrew the captive screws securing the cover for the 
side air inlet.
• Replace the filter, making sure that the arrow showing 
the air flow direction is pointed inwards.
• Replace the cover and fasten the screws.
• Remove the cover for the side air inlet by pushing it 
firmly to the right, as shown.
• Replace the filter, making sure that the arrow showing 
the air flow direction is pointed inwards.
• Replace the cover.
Front air inlet 
filter
Side air inlet 
filter 
Rev B September 2012  
						

							Digital Projection E-Vision 8000 series  CHANGING THE LENS, LAMPS, FILTERS AND COLOUR WHEEL Installation and Quick-Start Guide
Page Inst_6
Changing the color wheel
• Unscrew the captive screw securing the 
color wheel compartment cover.
• Open the color wheel compartment.
• Unscrew the four captive screws securing 
the color wheel.
• Remove the color wheel.
• Insert a new color wheel and fasten the 
screws.
• Replace the cover and fasten the screw.
Cover 
screw
Color wheel 
compartment
Color 
wheel 
screws
Notes
 The lamp and color wheel must 
be changed only by suitably 
qualified personnel.
  The projector will shut down if any 
of the covers are opened whilst in 
operation. 
Rev B September 2012