Dell Projector S320/S320wi User Manual

							 
       
 
 
     
 • Switch Windows (Alt + Tab) — Function as toggling among 
windows, acting as the ke yboard shortcut Alt + Tab. 
•Esc
—Function as the keyboard Esc button. 
• Show Desktop (Cmd + D) 
— Function as showing desktop, 
minimizing all windows. 
• Open Windows Explorer (Cmd + E) 
— Set the function as opening 
the Windows Explorer. 
•Middle Mouse 
— Set the function as the scroll wheel of the mouse. 
•Double Click 
— Set the function as double-clicking. 
•Disable 
— Disable the Function button. 
P
AIRING MODE—Allows you to set the pairing mode selection as Open or 
Fixed. 
•Pairing Mode 
— When you select  Open, follow the on-screen steps 
to set your Interactive Pen into the open mode. (This mode can let you 
use your Interactive Pen with any Dell interactive projector when the 
pen points to the screen.) 
•Fixed Mode — When you select Fixed, follow the on-screen steps to 
complete the pairing between Projector and Interactive Pen. (This 
mode is to make sure your Interactive Pen pairing with your designated 
projector.) 
Once paired, the Pen will automatically fix to the projector every time 
it turns on. 
R
ESET—Press  and select Confirm option to reset the Pen settings. 
Using Your Projector 71 
Downloaded From projector-manual.com DELL Manuals 
						

							  
 INFORMATION—Allows you to view the Pen 1 or Pen 2 information. 
INFORMATION—The information menu displays the current S320 or S320wi 
projector settings. 
LANGUAGE 
Allows you to set the language for the OSD. Press  to activate the Language 
menu. 
Using Your Projector 
72 
Downloaded From projector-manual.com DELL Manuals 
						

							    
HELP 
If you encounter problems with your projector, you can access the help menu for 
troubleshooting. 
Using Your Projector 73 
Downloaded From projector-manual.com DELL Manuals 
						

							  
  
   
 
     
 
  
 
    
Wireless Networking Installation 
NOTE: Your computer must have the following minimum system requirements: 
Operating System:  •Windows  Microsoft Windows XP™ Home or Professional Service pack 2 (32-bit 
recommended), Windows Vista 32-bit, and Windows
® 7 Home or Professional 
32-bit or 64-bit 
•MAC  MacBook and above, MacOS 10.5 and above 
Minimum Hardware: 
a Intel Dual Core 1.4 MHz or higher 
b 256 MB of RAM required, 512 MB or more recommended 
c 10 MB of available hard-disk space 
d nViDIA or ATI graphic card must with 64 MB VRAM or above 
e Ethernet adapter (10 / 100 bps) for an Ethernet connection 
f A supported WLAN adapter for a WLAN  connection (any NDIS-compliant 
802.11b or 802.11g or 802.11n Wi-Fi device) 
Web browser  Microsoft Internet Explorer 6.0 or 7.0 (rec ommended) or 8.0, Firefox  1.5 or 2.0, 
and Safari 3.0 and above 
NOTE: Wireless Networking Installation  steps are the same for the S320 and 
S320wi models. 
Using Your Projector 
74 
Downloaded From projector-manual.com DELL Manuals 
						

							Enable Wireless on the Projector 
In order to use your projector wirelessly, you need to complete the steps below: 1 
Install the optional wireless module kit (optional in S320). See "Installing the 
Optional Wireless Module Kit" on page 14.
 NOTE: Wireless module kit embedded for S320wi. 
2  Connect the power cable to the wall outlet and press the power button. 
3  Press the  Menu button on your projector control panel or remote control.
 
NOTE: Use  , ,  and   buttons to navigate and   to select. 
4	  Access the  INPUT SOURCE  menu, select Wireless/USB  and then select 
Wireless Display  on the sub-menu. See "INPUT SOURCE 
WIRELESS/USB" on page 52. 
Using Your Projector 75 
Downloaded From projector-manual.com DELL Manuals 
						

							   
     
 
 
 
The  Wireless Guide Screen shown below appears: 
5	 Take note of the  LOGIN CODE,  NETWORK NAME (SSID) , and IP 
ADDRESS. You will need these information to log in in later. 
Install the Wireless Applicatio n Software on Your Computer 
In order to use your wireless projector,  you must install the software on your 
system. 
6  Connect your computer to the  S320 or S320wi wireless network. 
NOTE: 
•	 Your computer must have wireless network function to detect the 
connection. 
Using Your Projector 
76 
Downloaded From projector-manual.com DELL Manuals 
						

							 
 
   
          
 
 
 
• When you connect to the S320 or S320wi wireless network, you will lose 
wireless connectivity with other wireless networks. 
NOTE: Remember to turn off all proxies. (In Microsoft® Windows Vista: Click 
Control Panel  JInternet Options  JConnections J LAN Settings) 
7 Open your internet browser. You will be automatically directed to the  S320 
or S320wi Web Management  web page. 
NOTE: If the web page does not load automatically, enter the IP address 
(default IP address is 192. 168.100.10) noted from the  projector’s screen in the 
browser’s address bar. 
Using Your Projector  77 
Downloaded From projector-manual.com DELL Manuals 
						

							   8 The S320 or S320wi Web Management page opens. For first-time use, click 
Download. 
9 Select the appropriate operating system, then click Download. 
Using Your Projector 
78 
Downloaded From projector-manual.com DELL Manuals 
						

							 
 
 
 
 
 
 
 
 
   
   
 
10	  Click  Run to proceed with 
the one-time installation of 
the software. 
NOTE: You may choose to 
save the file and install it at a 
latter time. To do this, click 
Save . 
NOTE: Audio projection function need install extra driver only in Windows XP. If 
your computer does not have the driver installed, a pop-up message will 
appear on-screen prompting you to install the required driver. You can 
download the “ Audio Projection Driver ” from the Dell Support site at 
support.dell.com. 
NOTE: If you are unable to install the  application because of inadequate rights 
on the computer, please contact your network administrator. 
11	  The installation software will launch. Follow the on-screen instruction to 
complete setup. 
Using Your Projector  79 
Downloaded From projector-manual.com DELL Manuals 
						

							 
 
 
  
 
  
Launch the Wireless Application 
Once the installation is complete, th e S320 or S320wi wireless application will 
launch and search automatically. If the program not launch automatically, you can 
double-click the  or  icon on the desktop to start the application. 
Login 
To communicate with your projector, enter the Login Code provided in Step 6 of 
Wireless Networking Installation, then click  OK. 
NOTE: If the IP Address  is not detected, enter the  IP Address displayed at the 
bottom left corner of the screen. 
NOTE: Please not click " Interactive Pen only " box in the log in screen when you 
use the wireless display or LAN display. 
Using Your Projector 
80 
Downloaded From projector-manual.com DELL Manuals