Dell Projector S320/S320wi User Manual

							 
 
   
   
 
      
 
SSID : Up to maximum length of 32 characters. 
Encryption : You can Disable WPA key or select one of 64-bit or 128-bit in 
ASCII or HEX string. 
Key : If Encryption is enabled, you have to set key value according to the 
Encryption mode you selected. 
RADIUS Server Setup  •	  Set up the IP address, Port, and Key information. 
GateKeeper  •	  There are three options: 
All Pass : Allow users to access the office network via the wireless projector. 
All Block : Block users from accessing the office network via the wireless 
projector.
 
Internet Only : Block users from the office network, but still reserve Internet 

connection capability.
 
Set Security For SNMP  •	  Setup Write Community information. 
Click the  Apply button to save and apply changes.  The projector must be restarted 
for the changes to take effect. 
Using Your Projector 101 
Downloaded From projector-manual.com DELL Manuals 
						

							    
   
 
     
      
 
Projection Setup 
Projection Setup 
•	  Resolution : Allows you to select the resolution. Options are: XGA 

(1024 x 768) and WXGA (1280 x 800).
 
•	  Login Code : Select how you want the login code to be generated by the 
projector. There are three options: 
•	  Disable : Login code will not be required when logging in to the system. 
•	  Random : Default is  Random. Login code will be randomly generated. 
•	  Use the following code : Enter a 4-digit code. This code will be used to 
log in to the system. 
Projector Setup 
•Set up the  Model Name, Projector Name , Location, and Contact 
information (up to 21 characters for each field). 
Click the  Apply button to save and apply changes.  The projector must be restarted 
for the changes to take effect. 
Using Your Projector 
102 
Downloaded From projector-manual.com DELL Manuals 
						

							    
 
 
  
Change Passwords 
This page allows you to chan ge the administrator password. 
•  Enter New Password : Enter the new password. 
•  Confirm New Password : Enter the password again and click  Apply. 
NOTE: Contact Dell if you forget your administrator password. 
Using Your Projector 103 
Downloaded From projector-manual.com DELL Manuals 
						

							Reset to Default 
Click the Apply button to restore the wireless/network setup to its factory default 
settings. 
Using Your Projector 
104 
Downloaded From projector-manual.com DELL Manuals 
						

							 
 
    
     
   
   
 
Firmware Upgrade 
Use the Firmware Upgrade page to update your projector’s wireless firmware. 
NOTE: Please disable and enable wireless/net work using the OSD to restart 
the network card for the projector  after firmware upgrade is successful. 
To start firmware update, follow these steps:  1  Press  Browse  to select the file to update. 
2  Click the  Update button to start. Wait while the system updates the 
firmware in your device. 
CAUTION: Do not interrupt the update process  as this may cause the system 
to crash! 
3  Click  OK when the update is complete. 
Using Your Projector  105 
Downloaded From projector-manual.com DELL Manuals 
						

							 
 
   
     
     
Projector Control Panel 
Projector Information 
•	  Projector Status : There are five states: Lamp On, Standby, Power Saving, 
Cooling, and Warming up. Click  Refresh to refresh the status and control 
settings. 
•	  Po w e r  S a v i n g : Power Saving can be set to Off, 30, 60, 90, or 120 minutes. For 
more information, see "Power Saving" on page 68. 
•	  Alert Status : There are three alert states: Lamp warning, Low lamp life, and 
Temperature warning. Your projector mi ght lock up in the protection mode 
if any of the alerts are activated. To exit the protection mode, click  Clear to 
clear the Alert Status before you power on your projector. 
Using Your Projector 
106 
Downloaded From projector-manual.com DELL Manuals 
						

							 
 
       
       
   
 
   
     
Image Control  •	  Projector Mode : Allows you to select the projector mode, depending on how 
the projector is mounted. There are four projection modes: Front 
Projection-Desktop, Front Projection-Wall Mount, Rear Projection-Desktop, 
and Rear Projection-Wall Mount. 
•	  Source Select : The Source Select menu allows you to select your projector's 
input source. You can select VGA-A, VGA-B, S-Video, Composite Video, 
HDMI, Wireless Display, USB Display, or USB Viewer. 
•	  Video Mode : Select a mode to optimize the display image based on how the 
projector is being used:
 - Presentation : Best for presentation slides.
 - Bright : Maximum brightness and contrast.
 - Movie : For viewing movies and photos.
 - sRGB : Provides a more accurate color representation.
 - Custom : User-preferred settings. 
•	  Blank Screen : You can select On or Off. 
•	  Aspect Ratio : Allows you to select the aspect ratio to adjust how the image 
appears. 
•	  Brightness : Select value to adjust the brightness of the image. 
•  Contrast : Select value to adjust the display contrast. 
Click the  Auto Adjust  button to adjust the settings automatically. 
Audio Control 
•	  Audio Input : Select the input source. Opti ons are: Analog In, HDMI, and 
Wireless/LAN. 
•	  Vo l u m e : Select the value (0~20) for audio volume. 
•	  Speaker : Select On to enable the audio function or select Off  to disable the 
audio function. 
Click the  Factory Reset  button to restore the factory default settings. 
Using Your Projector 107 
Downloaded From projector-manual.com DELL Manuals 
						

							 
 
     
 
    
 
 
 
Alert Setting 
E-mail Alert  •	  E-mail Alert: You can set whether to be  notified by email (Enable) or not 
(Disable). 
•	  To/Cc/From: You can enter email address of sender (From) and recipients 
(To/Cc) to receive notification when an abnormality or warning occurs. 
•  Subject: You can enter the subject line of the email. 
Click the  E-mail Alert Test  button to test the e-mail alert settings. 
SMTP Setting 
•	  Out going SMTP server , User name, and Password should be provided by 
your network administrator or MIS. 
Alert Condition 
•	  You can select the abnormalities or warnings to be notified by email. When 
any of the alert conditions occur, an email will be sent to the recipients 
(To/Cc). 
Click the  Save button to the save settings. 
NOTE: E-mail alert is designed to work with a standard SMTP server using the 
default 25 port. It does not  support encryption and authent ication (SSL or TLS). 
Using Your Projector 
108 
Downloaded From projector-manual.com DELL Manuals 
						

							 
Reboot System 
Click Reboot  to reboot the system. 
Crestron 
For Crestron function. 
Using Your Projector 109 
Downloaded From projector-manual.com DELL Manuals 
						

							  
   
   
 
 
Managing the Projector From Web 
Management (Network RJ45 Kit is Optional for 
S320) 
Configuring the Network Setting 
If the projector is connected to a network, you can access the projector using a web 
browser by configuring the network sett ing (TCP/IP). When using the network 
function, the IP address should be uniqu e. For configuring the network setting, 
refer to "LAN Settings" on page 63. 
The RJ45 kit is not shipped with your S320 projector. You can purchase it on the 
Dell website at www.dell.com. See "Insta lling the Optional RJ45 Kit" on page 16. 
Accessing Web Management 
Use Internet Explorer 5.0 and above or Firefox 1.5 and above and enter the IP 
address. You can now access Web Management and manage the projector from a 
remote location. 
Using Your Projector 
110 
Downloaded From projector-manual.com DELL Manuals