Dell Projector S320/S320wi User Manual

 
 
   
   
 
      
 
SSID : Up to maximum length of 32 characters. 
Encryption : You can Disable WPA key or select one of 64-bit or 128-bit in 
ASCII or HEX string. 
Key : If Encryption is enabled, you have to set key value according to the 
Encryption mode you selected. 
RADIUS Server Setup  •	  Set up the IP address, Port, and Key information. 
GateKeeper  •	  There are three options: 
All Pass : Allow users to access the office network via the wireless projector. 
All Block : Block users from...

    
   
 
     
      
 
Projection Setup 
Projection Setup 
•	  Resolution : Allows you to select the resolution. Options are: XGA 

(1024 x 768) and WXGA (1280 x 800).
 
•	  Login Code : Select how you want the login code to be generated by the 
projector. There are three options: 
•	  Disable : Login code will not be required when logging in to the system. 
•	  Random : Default is  Random. Login code will be randomly generated. 
•	  Use the following code : Enter a 4-digit code. This code will be...

    
 
 
  
Change Passwords 
This page allows you to chan ge the administrator password. 
•  Enter New Password : Enter the new password. 
•  Confirm New Password : Enter the password again and click  Apply. 
NOTE: Contact Dell if you forget your administrator password. 
Using Your Projector 103 
Downloaded From projector-manual.com DELL Manuals 

Reset to Default 
Click the Apply button to restore the wireless/network setup to its factory default 
settings. 
Using Your Projector 
104 
Downloaded From projector-manual.com DELL Manuals 

 
 
    
     
   
   
 
Firmware Upgrade 
Use the Firmware Upgrade page to update your projector’s wireless firmware. 
NOTE: Please disable and enable wireless/net work using the OSD to restart 
the network card for the projector  after firmware upgrade is successful. 
To start firmware update, follow these steps:  1  Press  Browse  to select the file to update. 
2  Click the  Update button to start. Wait while the system updates the 
firmware in your device. 
CAUTION: Do not interrupt the update...

 
 
   
     
     
Projector Control Panel 
Projector Information 
•	  Projector Status : There are five states: Lamp On, Standby, Power Saving, 
Cooling, and Warming up. Click  Refresh to refresh the status and control 
settings. 
•	  Po w e r  S a v i n g : Power Saving can be set to Off, 30, 60, 90, or 120 minutes. For 
more information, see "Power Saving" on page 68. 
•	  Alert Status : There are three alert states: Lamp warning, Low lamp life, and 
Temperature warning. Your projector mi ght...

 
 
       
       
   
 
   
     
Image Control  •	  Projector Mode : Allows you to select the projector mode, depending on how 
the projector is mounted. There are four projection modes: Front 
Projection-Desktop, Front Projection-Wall Mount, Rear Projection-Desktop, 
and Rear Projection-Wall Mount. 
•	  Source Select : The Source Select menu allows you to select your projector's 
input source. You can select VGA-A, VGA-B, S-Video, Composite Video, 
HDMI, Wireless Display, USB Display, or USB...

 
 
     
 
    
 
 
 
Alert Setting 
E-mail Alert  •	  E-mail Alert: You can set whether to be  notified by email (Enable) or not 
(Disable). 
•	  To/Cc/From: You can enter email address of sender (From) and recipients 
(To/Cc) to receive notification when an abnormality or warning occurs. 
•  Subject: You can enter the subject line of the email. 
Click the  E-mail Alert Test  button to test the e-mail alert settings. 
SMTP Setting 
•	  Out going SMTP server , User name, and Password should be provided...

 
Reboot System 
Click Reboot  to reboot the system. 
Crestron 
For Crestron function. 
Using Your Projector 109 
Downloaded From projector-manual.com DELL Manuals 

  
   
   
 
 
Managing the Projector From Web 
Management (Network RJ45 Kit is Optional for 
S320) 
Configuring the Network Setting 
If the projector is connected to a network, you can access the projector using a web 
browser by configuring the network sett ing (TCP/IP). When using the network 
function, the IP address should be uniqu e. For configuring the network setting, 
refer to "LAN Settings" on page 63. 
The RJ45 kit is not shipped with your S320 projector. You can purchase it on the...