Dell Projector S320/S320wi User Manual

   
    
 
 
 
 
   
   
Using the On-Screen Display 
•  The projector has a multi-language On-Screen Display (OSD) Menu that can 
be displayed with or without an input source. 
•  Press the Menu button on the control panel or the remote control to enter the 
Main Menu. 
•  To navigate through the tabs in the Main Menu, press the 
or  buttons on 
your projector's control panel or remote control. 
•  To select a submenu, press the 
or  button on your projector’s control 
panel or remote control. 
•...

      
   
 NOTE: The WIRELESS/USB can be used after the "Wireless and LAN" option is 
turned on. 
INPUT SOURCE WIRELESS/USB 
The Input Source Wireless/USB menu allows you to activate the Wireless Display, 
USB Display, and USB Viewer. 
WIRELESS DISPLAY—Press to access the projector's Wireless Guide screen. See 
"Wireless Guide screen" on page 76. 
USB D
ISPLAY—Allows you to display the computer/laptop screen to your projector 
via the USB cable. 
USB V
IEWER—Allows you to display...

 
  
    
   
   
BRIGHTNESS/CONTRAST 
The Brightness/Contrast menu allows you adjust the brightness/contrast settings 
of your projector. 
BRIGHTNESS—Use and  to adjust the brightness of the image. 
C
ONTRAST—Use and to adjust the display contrast. 
NOTE: If you adjust the settings for  Brightness and Contrast  the projector 
automatically switch to Custom mode. 
VIDEO MODE 
The Video Mode menu allows you to optimize the display image:  Presentation, 
Bright , Movie , sRGB (provides more accurate color...

   
 
 
 
   
VOLUME 
The Volume menu allows you adjust th e volume settings of your projector. 
VOLUME—Press  to increase the volume and to decrease the volume. 
AUDIO INPUT 
The Audio Input menu allows you to select your audio input source. The options 
are:  Analog In , HDMI, and Wireless/LAN . 
NOTE: Avoid line input signal from plugging into microphone port. Otherwise, 
user may listen to noises from speakers due to clamping and distortion of audio 
signal. 
Using Your Projector 
54 
Downloaded From...

   
 
  
 
   
   
 
 
ADVANCED SETTINGS 
The Advanced Settings menu allows you to change settings for Image , Display, 
Projector , LAN, Wireless , Menu, Po w e r, Interactive , and Information. 
IMAGE SETTINGS (IN PC MODE)—Select and press to activate image settings. The 
image settings menu provides the following options: 
COLOR TEMPERATURE—Allows you to adjust the color temperature. The screen 
appears cooler at higher color tempe ratures and warmer at lower color 
temperatures. When you adjust the...

  
   
 
       
   
   
   
 
 
 
The image settings menu provides the following options: 
COLOR TEMPERATURE—Allows you to adjust the color temperature. The screen 
appears cooler at higher color tempe ratures and warmer at lower color 
temperatures. When you adjust the values in the  Color Adjust menu, the 
Custom mode is activated. The values are saved in the Custom mode. 
RGB C
OLOR ADJUST—Allows you to manually adjust the colors red, green, 
and blue. 
S
ATURATION—Allows you to adjust the video...

  
   
           
   
     
   
 
       
The image settings menu provides the following options: 
VGA OUTPUT—Select On or Off the VGA output function at projector 
standby status. Default is Off. 
D
ISPLAY SETTINGS (IN PC MODE)— Select and press  to activate display settings. 
The display settings menu provides the following options: 
HORIZONTAL POSITION— Press 
the image left.  to move the image right and
 to move 
V
ERTICAL POSITION—Press 
image down.   to move the image up and 
 to move the 
F...

   
 
 
     
   
 
  
•16:9 — The input source scales to fit  the width of the screen to project a 
16:9 screen image. 
•4:3 — The input source scales to fi t the screen and projects a 4:3 image. 
Z
OOM— Press and  to zoom and view the image. 
Adjust the image scale by pressing
 or 
and press 
to view on your remote control 
only. 
ZOOM NAVIGATION—Press  to activate the  Zoom 
Navigation  menu. 
Use 
 to navigate the projection screen. 
3D DISPLAY—Select On to start the 3D display function (default is...

  
 
   
 
     
   
 
 
     
   
   
3D FORMAT—Allows you to select the 3D form at. Options are: Side By Side, 
Side By Side Full, Frame Sequential , Field Sequential, Top/Bottom, and 
Top/Bottom Full. 
3D S
YNC INVERT—If you see a discrete or overlapping image while 
wearing DLP 3D goggles, you may need  to execute 'Invert' to get best 
match of left/right image sequence to get the correct image. (For DLP 
3D goggles) 
D
ISPLAY SETTINGS (IN VIDEO MODE)— Select and press  to activate display...

  
   
   
a  Computer/Laptop with a 120 Hz  signal output quad-buffered 
graphics card. 
b  "Active" 3D glasses with DLP Link™. 
c  3D content. See "Note 4". 
d  3D Player. (Example: Stereoscopic Player...) 
2.	  Enable the 3D function when it sa tisfies any of the below-mentioned 
conditions: 
a  Computer/Laptop with graphics  card, capable of outputting at 
120 Hz signal via VGA or HDMI cable. 
b  Input a suite of 3D content via Video and S-Video. 
3.	  "3D Display" selection...