Dell Projector S320/S320wi User Manual

   
    
   
       
   
 
   
 
 
FAQS: 
I would like to remotely access 
the projector via the Internet. 
What is the best setting for the 
browser?  To have the best setting for the browser, please 
follow the below steps: 
1 Open 
Control Panel Internet Options 
General  tab Temporary Internet 
Files 
Settings Select  Every visit to 
the pages . 
2 Some firewall or anti-virus may block the 
HTTP application. If possible, turn off the 
firewall or anti-virus. 
I would like to remotely access  The...

  
 
 
   
 
 
 
 
   
Why am I unable to access the 
SMTP server? 1 Check with your MIS or network 
administrator whethe r the SMTP server 
function is open for the projector and the 
IP assigned to the projector is allowed to 
access the SMTP server. The projector’s 
SMTP socket port number is 25, this 
cannot be changed. 
2 Check if the outgoing SMTP server, user 
name, and password are set correctly. 
3 Some SMTP servers will check whether the 
mail address of "From" correlates with the...

    
     
   
     
 
 
Firewall Configuration and FAQ 
Q:  Why can’t I access the Web Management Page? 
A: Your computer’s firewall configurat ion may prevent you from accessing the 
Web Management Web Page. Please re fer to the following configuration 
settings: 
Firewall Protection  Configuration 
McAfee Security 
Center  1 
Launch McAfee Security Center ( Start > All 
Programs  > McAfee  > McAfee Security Center ). 
2  On the  personal firewall plus  tab, click Vi e w  t h e 
Internet Applications...

 
 
   
   
   
   
 
Firewall Protection  Configuration 
Windows Firewall  1 Open Windows Firewall ( Start > All Programs  > 
Control Panel ). Double-click on  Windows 
Fi re wa ll . 
2  On the  General  tab, uncheck  Don’t allow 
exceptions . 
3  On the  Exceptions  tab, click the  Add Program... 
button. 
4  Find and  sel ec t  Dell S320 or S320wi Projector 
from the list of programs, then click  OK. 
5  Click  OK to confirm exceptions settings. 
Zone Alarm  1 Open Zone Alarm Firewall ( Start > All...

  
 
   
   
Make Application Token 
The Application Token lets you perform Plug and Show using a USB token. 
NOTE: This is only application to S3 20wi or a wireless-enabled S320. 
1  From the application software, click 
> Make Application Token . 
2  The following screen appears. Click  Next. 
3 Plug a flash drive into any of the USB ports on your computer. Select the 
drive from the list, then click  Next. 
4 Click  Fi nish  to close the wizard. 
Using Your Projector  125 
Downloaded From...

    
   
 
 
    
 
 
 
4
 
Troubleshooting Your Projector 
If you experience problems with your pr ojector, see the following troubleshooting 
tips. If the problem persists, contact  Dell™ (see Contacting Dell™ on page 144). 
Problem 
No image appears on the 
screen 
Fn 
F8 CRT/LCD 
Possible Solution  •  Ensure that you have chosen the correct 
input source on the INPUT SOURCE 
menu. 
•  Ensure the external graphics port is 
enabled. If you are using a Dell™ laptop 
computer, press 
 (Fn+F8). For 
other...

    
 
  
 
   
   
 
 
 
 
 
  
    
 
 
 
 
Problem (continued) Possible Solution (continued) 
Partial, scrolling, or 
incorrectly displayed image 1 Press the 
Auto Adjust  button on the 
remote control or the control panel. 
2 If you are using a Dell™ laptop computer, 
set the resolution of the computer to 
WXGA (1280 x 800): 
a Right-click the unused portion of your 
Microsoft® Windows® desktop, click 
Properties,  and then select  Settings tab. 
b Verify that the setting is 1280 x 800 pixels 
for...

  
   
  
   
   
   
 
 
 
 
Problem (continued) Possible Solution (continued) 
Image is out of focus 1 Adjust the focus ring on the projector lens. 
2 Ensure that the projection screen is within 
the required distance from the projector 
1.31 ft [0.4 m] to 12.5 ft [3.82 m]. 
The image is stretched when 
displaying a 16:9 DVD  The projector automatically detects the input 
signal format. It will maintain the aspect ratio 
of the projected image according to input 
signal format with an Original setting....

 
   
 
 
 
Problem (continued)	 Possible Solution (continued) 
TEMP light is solid amber	 
The projector has overheated. The display 
automatically shuts down. Turn the display on 
again after the projector cools down. If the 
problem persists, contact Dell™. 
TEMP light is blinking amber	  If the projector fan fails, the projector will 
automatically shut down. Try to clear the 
projector mode by pressing and holding the 
Po w e r  button for 10 seconds. Please wait for 
about 5 minutes and try to...

   
  
 
     
   
 
 
Troubleshooting your Interactive Pen
 
Problem (continued) Possible Solution (continued) 
Cannot use the Pen or cannot 
connect the Pen  • 
Check if the input source is PC (VGA, 
HDMI, Wireless and LAN source) 
•  Check if the Interactive function is turned 
On. (Menu -> Advanced Settings -> 
Interactive Settings -> Interactive) 
•  Check if the Connection option is set 
correctly. (Menu -> Advanced Settings -> 
Interactive Settings -> Connection) 
•  When using Wireless or LAN...