Dell Projector S320/S320wi User Manual

  
 
 
Managing Properties 
Home 
•	  Access the Web Management Home page  by entering the projector’s IP 
address at the web browser. See "LAN Settings" on page 63. 
•	  Language : Allows you to set the language for web management. 
Using Your Projector 111 
Downloaded From projector-manual.com DELL Manuals 

    
   
     
Network Settings 
•Set up the Model Name, Projector Name , Location, and Contact 
information (up to 21 characters for each field). Press  Save to store the 
settings. 
•	  Choose  DHCP to assign an IP address to the projector from a DHCP server 
automatically, or  Manual to assign an IP address manually. 
•Set up the  IP Address, Device ID,  and Po r t information on the Crestron 
function. 
Using Your Projector 
112 
Downloaded From projector-manual.com DELL Manuals 

 
 
 
 
   
 
       
 
Projector Status and Control Page 
•	 Projector Status : There are 5 status: Lamp On, Standby, Power Saving, 
Cooling, and Warming up. Click the  Refresh button to refresh the status 
and control settings. 
•	  Po w e r  S a v i n g : Power Saving can be set to Off, 30, 60, 90, or 120 minutes. 
Refer to page 68. 
•	  Alert Status : There are three error status: Lamp warning, Low lamp life, and 
Temperature warning. Your projector mi ght lock up in protection mode if 
any of the...

    
   
 
 -Bright: Maximum brightness and contrast.
 -
Movie: For viewing movie & photo.
 -
sRGB: Provide a more accurate color representation.
 -
Custom: User preferred settings. 
•	  Blank Screen : You can select On or Off. 
•	  Aspect Ratio : Allows you to select the aspect ratio to adjust how the image 
appears. 
•	  Brightness : Select value 
to adjust the brightness of the image. 
•  Contrast : Select value to adjust the display contrast. 
Click the  Auto Adjust  button to adjust the settings...

  
   
 
   
E-mail Alert 
•	 E-mail Alert:  You can set whether to be notified by email (Enable) or not 
(Disable). 
•	  To/Cc/From:  You can enter email address of sender (From) and recipients 
(To/Cc) to receive notification when an abnormality or warning occurs. 
•	  Out going SMTP server , User name, and Password should be provided by 
your network administrator or MIS. 
•	  Alert Condition:  You can select the abnormalities or warnings to be notified 
by email. When any of the alert conditions...

  
 
     
 
  
Password Setting 
Use Password Setting to set up an administrator password to access the  We b 
Management . When enabling password for the first time, set the password before 
enabling it. When the password function is enabled, the administrator password 
will be required for accessing the  Web Management. 
•  New Password : Enter new password 
•  Confirm Password : Enter password again and submit 
•  Write Community : Set security for SNMP. Enter password and submit. 
NOTE: Contact Dell...

Login Page 
• Administrator Password : Enter the Administrator Password and click Login. 
Using Your Projector  117 
Downloaded From projector-manual.com DELL Manuals 

  
Firmware Upgrade 
Use the Firmware Update page to update your projector’s firmware. Press  Update 
to start. 
•  Please wait till the count reaches 0. 
Using Your Projector 
118 
Downloaded From projector-manual.com DELL Manuals 

 
 •  Wait for 3 seconds and it will proceed to the next step automatically. 
• Select the file to upgrade and click the  Upgrade button. When upgrading is 
in progress, the Cancel  button is disabled. 
Using Your Projector  119 
Downloaded From projector-manual.com DELL Manuals 

  
 
•  Please wait till the count reaches 0. 
•	  When upgrade is complete, please click the  Re Login button to go back to 
the Web Management Home Page. 
Crestron 
For Crestron function. 
Using Your Projector 
120 
Downloaded From projector-manual.com DELL Manuals