Dell H 625 Cdw Manual

Dell™ Printer Configuration Web Tool |151
Fax Settings
Configures the fax settings.
NOTE:
•You cannot set up the items on the  Fax Settings page unless you set up the country code under 
Country .
• Duplex print may not be done depending on the size  of the received faxes or settings of the trays, 
etc.
Fax Defaults Resolution Standard
Suitable for documents with normal sized 
characters.
Fine Suitable for documents containing small 
characters or thin lines or documents printed 
using a dot-matrix...

152| Dell™ Printer Configuration Web Tool
Incoming 
DefaultsReceive Mode Telephone
Automatic fax reception is turned off. You can 
receive a fax by picking up the handset of the 
external telephone and then pressing a remote 
receive code, or by tapping Receive in On 
Hook and then tapping  Receive. For details, 
see "Receiving a Fax Manually."
Fax Automatically receives faxes.
Te l e p h o n e / F a x When the printer receives an incoming fax, the 
external telephone rings for the time specified...

Dell™ Printer Configuration Web Tool |153
Received Fax  
Forward
Received Fax 
Forward Sets your printer to forward incoming faxes to 
another fax number, to e-mail addresses, or to a 
server.
Forward Forwards incoming faxes to a specified 
destination. Prints incoming faxes if an error 
occurs during the transfer.
Forwarding 
Number Allows you to enter the fax number of the 
destination to which incoming faxes are 
forwarded.
Forward to 
E-mail Forwards incoming faxes to specified e-mail 
addresses....

154| Dell™ Printer Configuration Web Tool
Scan Defaults
Creates your own default scan settings.
Tr a n s m i s s i o n  
DefaultsRedial Attempts
Sets the number of redial attempts to make if 
the destination fax number is busy. If you enter 
0, the printer does not redial.
Interval of Redial Sets the interval between redial attempts.
Resend Delay Sets the interval between re-send attempts.
To n e / P u l s e Sets whether to use tone or pulse dialing.
Prefix Dial Sets whether to set a prefix dial number....

Dell™ Printer Configuration Web Tool |155
Direct Print Defaults / USB Direct Print Defaults
NOTE:
•For Dell H625cdw and Dell H825cdw,  Direct Print Defaults is displayed. For Dell S2825cdn,  USB 
Direct Print Defaults  is displayed.
Creates your own Direct Print Defaults  / USB Direct Print Defaults  setting.
MIFARE Customized Card
Registers SSFC formatted NFC ID cards.
Scan Defaults File Format Sets the file format in which scanned data is to be saved.
Output Color Sets whether to scan in color or in...

156| Dell™ Printer Configuration Web Tool
NOTE:
•This is available on Dell H625cdw and Dell H825cdw.
Printer Maintenance
The  Printer Maintenance  tab includes the Paper Density , Adjust Transfer Belt Unit , 
Adjust 2nd BTR , Adjust Fusing Unit , Color Registration Adjustments , Clean Developer , 
Reset Defaults , Initialize Print Meter , Clear Stored Jobs , Non-Dell Toner , Adjust 
Altitude ,  Clock Settings , and Web Link Customization  pages.
Paper Density
Specifies the paper density for the plain...

Dell™ Printer Configuration Web Tool |157
curled, try to lower the temperature. When the toner does not fuse on the paper 
properly, try to increase the temperature.
NOTE:
•The print quality changes depending on the setting values you select for this item.
Color Registration Adjustments
Specifies whether to automatically pe rform color registration adjustment.
Clean Developer
Stirs the developer in the drum cart ridge and cleans the transfer unit.
Reset Defaults
Initializes the non-volatile (NV) memory....

158| Dell™ Printer Configuration Web Tool
*This is available on Dell H625cdw and Dell H825cdw.
Initialize Print Meter
Initializes the print meter of the printer. When the print meter is initialized, the meter 
count is reset to 0.
Clear Stored Jobs
NOTE:
•Clear Stored Jobs feature is available only when  RAM Disk is enabled.
Clears all files stored in the RAM disk.
Non-Dell Toner
Uses toner cartridge of another manufacturer.
CAUTION:
• Using a non-Dell toner cartridge may severely da mage the printer....

Dell™ Printer Configuration Web Tool |159
Web Link Customization
Specifies a link used for ordering consumables, which can be accessed from Order 
Supplies at:  in the left frame.
Print Server Settings
Use the Print Server Settings  menu to set the type of printer interface and the necessary 
conditions for communication.
Print Server Reports
The  Print Server Reports  tab includes the Print Server Setup Page  and the E-Mail Server 
Setup Page .
Print Server Setup Page
Displays the current settings of...

160| Dell™ Printer Configuration Web Tool
NOTE:
•The  Auto Refresh  feature is effective for the contents of the top frame,  Printer Status page, Job 
List  page, and Completed Jobs  page.
Port Settings
Enables or disables printing ports and management protocol features.
Dell Printer 
Configuration Web 
To o l  S e t t i n g sAuto Refresh
Automatically refreshes the contents of the status display 
pages.
Auto Refresh Interval Sets the time interval for refreshing the contents of the 
status display pages...