Dell B 2360 Printer Manual

Insert tray [x]
Insert the indicated tray into the printer.
Load [paper source] with [custom type name] [orientation]
Try one or more of the following:
Load the tray or feeder with the correct size and type of paper.
From the printer control panel, press  to clear the message and continue printing.
Note: If the printer finds a tray that has the correct size and type of paper, then it feeds from that tray. If the
printer cannot find a tray that has the correct size and type of paper, then it prints from...

Cancel the current job.
Load MP feeder with [custom type name] [orientation]
Try one or more of the following:
Load the feeder with the correct size and type of paper.
From the printer control panel, press  to clear the message and continue printing.
Note: If no paper is loaded in the feeder, then the printer manually overrides the request, and then prints from
an automatically selected tray.
Cancel the current job.
Load MP feeder with [custom string] [orientation]
Try one or more of the following:
Load...

Memory full [38]
Try one or more of the following:
From the printer control panel, press  to clear the message.
Decrease the resolution setting.
Install additional printer memory.
Memory low, no Resource Save [35]
Try one or more of the following:
From the printer control panel, press  to disable Resource Save, clear the message, and continue printing.
Install additional printer memory.
Network error, port [x] [54]
Try one or more of the following:
From the printer control panel, press  to clear the...

To accept any and all of these risks and to proceed with the use of non-genuine supplies or parts in your printer,
press 
 and  on the printer control panel simultaneously for 15 seconds to clear the message and continue
printing.
If you do not wish to accept these risks, then remove the third-party supply or part from your printer, and then install
a genuine Dell supply or part.
Note: For the list of supported supplies, see the “Ordering supplies” section of the Users Guide or visit...

Replace cartridge, 0 estimated pages remain [88.xy]
Replace the toner cartridge to clear the message and continue printing. For more information, see the instruction sheet
that came with the supply or see the “Replacing supplies” section of the User’s Guide.
Note: If you do not have a replacement cartridge, then visit our Web site or contact the place where you purchased
the printer.
Replace cartridge, printer region mismatch [42.xy]
Install a suitable toner cartridge.
Replace imaging unit, 0 estimated...

Replace unsupported imaging unit [32.xy]
Remove the imaging unit, and then install a supported one to clear the message and continue printing. For more
information, see the instruction sheet that came with the supply or see the “Replacing supplies” section of the User’s
Guide.
Note: If you do not have a replacement imaging unit, then see the “Ordering supplies” section of the User’s Guide or
visit our Web site.
Too many trays. Remove some. [58]
1Turn off the printer.
2Unplug the power cord from the...

ActionYesNo
Step 4
Check other electrical equipment plugged into the electrical outlet.
Does other electrical equipment work?Unplug the other
electrical equipment,
and then turn on the
printer. If the printer
does not work, then
reconnect the other
electrical equipment.Go to step 5.
Step 5
Check if the cables connecting the printer and the computer are inserted
in the correct ports.
Are the cables inserted in the correct ports?Go  to  step  6. Make sure to match the
following:
The USB symbol on
the cable...

ActionYesNo
Step 11
Check the installed printer driver.
Is the correct printer driver installed?Go to step 12. Install the correct
printer driver.
Step 12
Turn off the printer, then wait for about 10 seconds, and then turn the
printer back on.
Is the printer working?The problem is solved. Contact 
technical
support.
Printer display is blank
ActionYesNo
Step 1
Press the Sleep button on the printer control panel.
Does Ready appear on the printer display?The problem is solved. Go to step 2.
Step 2
Turn off...

ActionYesNo
Step 3
Print a menu settings page, and then check to see if the internal option is
listed in the Installed Features list.
Is the internal option listed in the menu settings page?Go to step 4. Reinstall the internal
option.
Step 4
aCheck if the internal option is selected.
It may be necessary to manually add the internal option in the printer
driver to make it available for print jobs. For more information, see
“Adding available options in the print driver” on page 20.
bResend the print job....

ActionYesNo
Step 4
Check if the tray is available in the printer driver.
Note: If necessary, manually add the tray in the printer driver to make it
available for print jobs. For more information, see 
“Adding available
options in the print driver” on page 20.
Is the tray available in the printer driver?Go to step 5. Manually add the tray
in the printer driver.
Step 5
Check if the option is selected.
aFrom the application you are using, select the option. For Mac OS X
version 9 users, make sure the...