Dell B 2360 Printer Manual

UseTo
Print Recovery
Jam Recovery
On
Off
Auto
Print Recovery
Jam Assist
On
Off
Print Recovery
Page Protect
Off
OnSpecify whether the printer reprints jammed pages.
Notes:
Auto is the factory default setting. The printer reprints
jammed pages unless the memory required to hold the
pages is needed for other printer tasks.
On sets the printer to always reprint jammed pages.
Off sets the printer to never reprint jammed pages.
Notes:
On is the factory default setting. This sets the printer to
automatically...

UseTo
Custom Home Message
Off
IP Address
Hostname
Contact Name
Location
Zero Configuration Name
Custom Text 1Select a custom home message that appears as an alternating
display of the printer status.
Note: Off is the factory default setting.
Print Settings
Setup menu
UseTo
Printer Language
PCL Emulation
PS EmulationSet the default printer language.
Notes:
PCL Emulation is the factory default setting.
PostScript emulation uses a PostScript interpreter for
processing print jobs.
PCL Emulation uses a PCL...

UseTo
Resource Save
On
OffSpecify how the printer handles temporary downloads, such as
fonts and macros stored in the RAM, when the printer receives a
print job that requires more than the available memory.
Notes:
Off is the factory default setting. Off sets the printer to retain
downloads only until memory is needed. Downloads are
deleted in order to process print jobs.
On sets the printer to retain downloads during language
changes and printer resets. If the printer runs out of
memory, then Memory Full...

UseTo
Separator Sheets
Off
Between Copies
Between Jobs
Between PagesSpecify whether to insert blank separator sheets.
Notes:
Off is the factory default setting.
Between Copies inserts a blank sheet between each copy of a print job if
Collate is set to (1,1,1) (2,2,2). If Collate is set to (1,2,3) (1,2,3), then a blank
page is inserted between each set of printed pages, such as after all page 2s
and after all page 3s.
Between Jobs inserts a blank sheet between print jobs.
Between Pages inserts a blank...

Quality menu
UseTo
Print Resolution
300 dpi
600 dpi
1200 dpi
1200 Image Q
2400 Image QSpecify the printed output resolution in dots per inch.
Note: 600 dpi is the factory default setting.
Pixel Boost
Off
Fonts
Horizontally
Vertically
Both directions
IsolatedEnable more pixels to print in clusters for clarity, in order to enhance images horizontally
or vertically, or to enhance fonts.
Note: Off is the factory default setting.
Toner Darkness
1–10Lighten or darken the printed output.
Notes:
8 is the factory...

Utilities menu
UseTo
Format Flash
Yes
NoFormat the flash memory.
Warning—Potential Damage: Do not turn off the printer while the flash memory is
being formatted.
Notes:
Flash memory refers to the memory added by installing a flash memory card in
the printer.
Yes deletes all data stored in the flash memory.
No cancels the format request.
The flash memory option card must not be read/write‑ or write‑protected.
This menu item appears only when a non‑defective flash memory card is
installed.
Hex TraceAssist...

UseTo
Font Priority
Resident
FlashEstablish the font search order.
Notes:
Resident is the factory default setting.
This menu item is available only when a formatted flash memory card is
installed and operating properly.
Make sure the flash memory card is not read/write‑, write‑, or
password‑protected.
Job Buffer Size must not be set to 100%.
PCL Emul menu
UseTo
Font Source
Resident
Download
Flash
AllSpecify the set of fonts used by the Font Name menu.
Notes:
“Resident” is the factory default setting....

UseTo
PCL Emulation Settings
Pitch
0.08–100Specify the font pitch for scalable monospaced fonts.
Notes:
10 is the factory default setting.
Pitch refers to the number of fixed‑space characters per inch (cpi).
Pitch can be increased or decreased in 0.01‑cpi increments.
For nonscalable monospaced fonts, the pitch appears on the display but it
cannot be changed.
PCL Emulation Settings
Orientation
Portrait
LandscapeSpecify the orientation of text and graphics on the page.
Notes:
Portrait is the factory...

UseTo
Tray Renumber
Assign MP Feeder
Off
None
0–199
Assign Tray [x]
Off
None
0–199
Assign Manual Paper
Off
None
0–199
Assign Manual Env
Off
None
0–199Configure the printer to work with printer software or programs that use
different source assignments for trays and feeders.
Notes:
Off is the factory default setting.
None cannot be selected. It is only displayed when it is selected by the
PCL 5 interpreter. It also ignores the Select Paper Feed command.
0–199 allows a custom setting to be assigned.
Tray...

Saving money and the environment
Saving paper and toner
Studies show that as much as 80% of the carbon footprint of a printer is related to paper usage. You can significantly
reduce your carbon footprint by using recycled paper and the following printing suggestions, such as printing on both
sides of the paper and printing multiple pages on one side of a single sheet of paper.
For information on how you can quickly save paper and energy using one printer setting, see 
“Using Eco‑Mode” on
page 80....