Dell B 2360 Printer Manual

UseTo
View Card SpeedView the speed of an active network card.
Network Address
UAA
LAAView the network addresses.
Job Timeout
0–255 secondsSet the amount of time it takes for a network print job to be canceled.
Notes:
90 seconds is the factory default setting.
A setting value of 0 disables the timeout.
If a value of 1–9 is selected, then the setting is saved as 10.
TCP/IP menu
To access the menu, navigate to any of the following:
Network/Ports > Standard Network > Standard Network Setup > TCP/IP...

UseTo
Enable HTTP Server
Yes
NoEnable the built-in Web server (Embedded Web Server). When enabled, the printer
can be monitored and managed remotely using a Web browser.
Note: Yes is the factory default setting.
WINS Server AddressView or change the current WINS server address.
Enable DDNS
Yes
NoView or change the current DDNS setting.
Note: Yes is the factory default setting.
Enable mDNS
Yes
NoView or change the current mDNS setting.
Note: Yes is the factory default setting.
DNS Server AddressView or...

UseTo
Enable DHCPv6
On
OffEnable DHCPv6 in the printer.
Note: On is the factory default setting.
* These settings can be changed only from the Embedded Web Server.
Wireless menu
Note: This menu is available only in printers connected to a wireless network or printer models that have a wireless
network adapter.
To access the menu, navigate to any of the following:
Network/Ports > Network [x] > Network [x] Setup > Wireless
UseTo
Network Mode
Infrastructure
Ad hocSpecify the network mode.
Notes:
Ad hoc is...

UseTo
View AddressShow the assigned AppleTalk address.
Note: The address can be changed only from the Embedded Web Server.
Set Zone
[list of zones available on the network]Provide a list of AppleTalk zones available on the network.
Note: The factory default setting is the default zone for the network. If no
default zone exists, then the zone marked with an asterisk (*) is the default
setting.
Standard USB menu
UseTo
PCL SmartSwitch
On
OffSet the printer to automatically switch to PCL emulation when a...

UseTo
USB Buffer
Disabled
Auto
3K to [maximum size allowed]Set the size of the USB input buffer.
Notes:
Auto is the factory default setting.
Disabled turns off job buffering.
The USB buffer size value can be changed in 1-KB increments.
The maximum size allowed depends on the amount of memory in the printer,
the size of the other link buffers, and whether Resource Save is set to On or
Off.
To increase the maximum size range for USB Buffer, disable or reduce the size
of the parallel, serial, and network...

UseTo
Use SSL
Disabled
Negotiate
RequiredSet the printer to use SSL for increased security when connecting to the
SMTP server.
Notes:
Disabled is the factory default setting.
When the Negotiate setting is used, the SMTP server determines if
SSL will be used.
SMTP Server Authentication
No authentication required
Login/Plain
CRAM‑MD5
Digest‑MD5
NTLM
Kerberos 5Specify the type of user authentication required for printing privileges.
Note: “No authentication required” is the factory default setting....

UseTo
Configure Log
Enable Audit
Yes
No
Enable Remote Syslog
No
Yes
Remote Syslog Facility
0–23
Severity of events to log
0–7Specify how and whether or not audit logs are created.
Notes:
Enable Audit determines if events are recorded in the secure audit log and
remote syslog. No is the factory default setting.
Enable Remote Syslog determines if logs are sent to a remote server. No is the
factory default setting.
Remote Syslog Facility determines the value used to send logs to the remote
syslog server. 4...

Settings menu
General Settings menu
UseTo
Display Language
English
Francais
Deutsch
Italiano
Espanol
Dansk
Norsk
Nederlands
Svenska
Portuguese
Suomi
Russian
Polski
Greek
Magyar
Turkce
Cesky
Simplified Chinese
Traditional Chinese
Korean
JapaneseSet the language of the text appearing on the display.
Note: Not all languages are available for all printers, and you may
need to install special hardware for those languages to appear.
Show Supply Estimates
Show estimates
Do not show estimatesView the estimates...

UseTo
Run Initial setup
Yes
NoRun the setup wizard.
Notes:
Yes is the factory default setting.
After completing the setup wizard by selecting Done at the
country or region selection screen, the default becomes No.
Paper Sizes
US
MetricSpecify the unit of measurement for paper sizes.
Notes:
US is the factory default setting.
The initial setting is determined by your country or region
selection in the initial setup wizard.
Timeouts
Sleep Mode
Disabled
1–120 minSet the amount of time the printer waits after...

UseTo
Timeouts
Hibernate Timeout on Connection
Hibernate
Do Not HibernateSet the printer to Hibernate mode even if there is an active Ethernet
connection.
Note: Do Not Hibernate is the factory default setting.
Timeouts
Screen Timeout
15–300 secSet the amount of time in seconds the printer waits before the it
returns to a ready state.
Note: 30 sec is the factory default setting.
Timeouts
Print Timeout
Disabled
1–255 secSet the amount of time in seconds the printer waits to receive an
end‑of‑job message...