Dell B 2360 Printer Manual

The network mask
A nickname for the printer (optional)
Note: A printer nickname can make it easier for you to identify your printer on the network. You can choose to
use the default printer nickname, or assign a name that is easier for you to remember.
You will need an Ethernet cable to connect the printer to the network and an available port where the printer can
physically connect to the network. Use a new network cable when possible to avoid potential problems caused by a
damaged cable.
Preparing to...

security information for your network, then see the documentation that came with the access point, or contact
your system support person.
–To find the WPA/WPA2 preshared key/passphrase for the wireless network, see the documentation that came
with the access point, see the Web page associated with the access point, or consult your system support
person.
Connecting the printer to a wireless network using Wi‑Fi Protected Setup
Before connecting the printer to a wireless network, make sure that:
The access...

Connecting the printer to a wireless network using the printer software
Notes:
Make sure your printer is turned on.
Make sure the wireless network adapter installed in your printer is working properly. For information on
installing the wireless network adapter, see the instruction sheet that came with the adapter.
Using the Wireless Setup Utility (Windows only)
1Check if the printer software is already installed.
2Use the search command on the Start menu to locate Printer Home.
3Open Printer Home, and...

Connecting the printer to a wireless network using the Embedded Web Server
Before you begin, make sure that:
Your printer is connected temporarily to an Ethernet network.
A wireless network adapter is installed in your printer and working properly. For more information, see the
instruction sheet that came with your wireless network adapter.
1Open a Web browser, and then type the printer IP address in the address field.
Notes:
View the printer IP address on the printer control panel. The IP address...

Printing a network setup page
If the printer is connected to a network, then print a network setup page to verify the network connection. This page
also provides important information that aids network printing configuration.
1From the printer control panel, navigate to:
 > Reports >  > Network Setup Page > 
Note: If an optional print server is installed, then Print Network [x] Setup Page appears.
2Check the first section of the network setup page and confirm that the status is Connected.
If the status...

Loading paper and specialty media
The selection and handling of paper and specialty media can affect how reliably documents print. For more information,
see 
“Avoiding jams” on page 97 and “Storing paper” on page 43.
Setting the paper size and type
1From the printer control panel, navigate to:
 > Paper Menu >  > Paper Size/Type > 
2Select Tray [x] Size or Tray [x] Type, and then press .
3Change the paper size or type setting, and then press .
Notes:
The paper size setting for the standard 250‑sheet tray...

3Change the settings, and then press .
Using the standard bin and paper stop
The standard bin holds up to 150 sheets of 75‑g/m2 (20‑lb) paper. It collects prints facedown. The standard bin includes
a paper stop that keeps paper from sliding out the front of the bin as it stacks.
To open the paper stop, pull it so that it flips forward.
Note: Close the paper stop when moving the printer to another location.
Loading trays
CAUTION—POTENTIAL INJURY: To reduce the risk of equipment instability, load each tray...

1
2Squeeze and then slide the width guide tab to the correct position for the size of the paper you are loading.
Loading paper and specialty media28 

3Squeeze and then slide the length guide tab to the correct position for the size of the paper you are loading.
2
1
Notes:
For some paper sizes like letter, legal, and A4, squeeze and slide the length guide tab backward to
accommodate their length.
If you are loading A6-size paper in the standard tray, then squeeze and then slide the length guide tab
toward the center of the tray to the A6‑size position.
Make sure the width and length guides are aligned with the paper size indicators on the bottom of the...

4Flex the sheets back and forth to loosen them, and then fan them. Do not fold or crease the paper. Straighten the
edges on a level surface.
5Load the paper stack.
Notes:
Load with the printable side facedown when using recycled or preprinted paper.
Load prepunched paper with the holes on the top edge toward the front of the tray.
Load letterhead facedown, with the top edge of the sheet toward the front of the tray. For two‑sided
printing, load letterhead faceup with the bottom edge of the sheet toward...