DELL 2335dn User Manual

Changing the Fax Setup OptionsPress  Scroll  (
 or 
 ) to highlight  Fax and then press  Select (
 ).
1.
Press  Scroll  (
 or 
 ) to highlight  Fax Defaults  and then press  Select (
 ).
2.
Press  Scroll  (
 or 
 ) to display the desired menu item and then press  Select (
 ).
3.
Use  Scroll  (
 or 
 ) to find the status or use the number keypad to enter the value for the option you
have selected.
4.
Press  Select  (
 ) to save the selection.
5.
If necessary,  repeat steps 3  through 5  .
6.
Press  Cancel...

accessing Fax 
 On Hook Dial  
 Yes  when the bell is
ringing (you can hear voice or fax tones from the remote
machine) and then pressing  Start (
 ) on the
operator panel.
Ans/Fax mode  : The printer can share one telephone line
with an answering machine. In this mode, the printer may monitor
the fax signal and pick up the line  if there are fax tones. If the phone
communication in your country is serial,  this mode is not available.
DRPD mode  : Before using the Distinctive Ring Pattern
Detection...

DRPD
Mode
You can receive a call using the Distinctive Ring Pattern Detection
(DRPD) feature which enables a user to use a single telephone line to
answer several different telephone numbers. In this menu, you can set the
printer to recognize the ring patterns to answer. For details about this
feature, see Receiving Faxes Using the DRPD Mode  .
Select
Tray
You can set the tray that you want to use for a received fax printing
job.
Print
Duplex
You can set the machine to print received faxes on both sides...

Press Cancel  (
) to return to the Standby mode.
4.
Sending a Fax
Adjusting the Document Contrast
Use the Contrast setting to fax your documents lighter or darker.
Press  Scroll  (
 or 
 ) to highlight  Fax and then press  Select (
 ).
1.
Press  Scroll  (
 or 
 ) to highlight  Contrast and then press  Select (
 ).
2.
Press  Scroll  (
 or 
 ) to select the Contrast mode you want and then press  Select (
 ).
Normal  works well with standard typed or printed documents.
Darker works well with light print or...

Mode Recommended for:
Standard Documents with normal sized characters.
Fine Documents containing small characters or thin lines or documents
printed using a dot-matrix printer.
Super
Fine
Documents containing extremely fine detail. The super fine mode is
enabled only if the remote printer also supports the Super Fine resolution.
See the notes below.
Photo Documents containing shades of gray or photographs.
Color Documents with colors. Sending a color fax is enabled only if the
remote printer supports...

Sending a Fax ManuallyLoad the document(s) face up with top edge in first into the DADF.
1.
OR
Place a single document face down on the document glass.
For details about loading a document, see Adjusting the Document Contrast  .
Adjust the document contrast and resolution to suit your fax needs.
2.
Press  Scroll  (
 or 
 ) to highlight  Fax and then press  Select (
 ).
3.
Press  Scroll  (
 or 
 ) to highlight  On Hook Dial  and then press  Select (
 ).
4.
Press  Select  (
 ) to select  Yes .
5.
Enter the...

To cancel the automatic redialing, press  Cancel (
 ).
To change the time interval between redials and the number of redial attempts, see Available Fax Defaults
Options  .
Redialing fax number
When you want to redial the last fax number you have sent, you can use this feature. Load the document(s) face up with top edge in first into the DADF.
1.
OR
Place a single document face down on the document glass.
For details about loading a document, see Adjusting the Document Contrast  .
Adjust the document...

Receiving Automatically in the Fax Mode
Your printer is preset to the fax mode at the factory.
When you receive a fax, the printer answers the call on a specified number of rings and automatically
receives the fax.
To change the number of rings, see Available Fax Defaults Options  .
If you want to adjust the ringer volume,  see Setting Sounds  .
Receiving Manually in the Tel Mode
You can receive a fax by picking up the handset of the extension phone and then pressing the remote
receive code (see Receive...