DELL 2150cn User Manual
Have a look at the manual DELL 2150cn User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 327 Dell manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Troubleshooting Guide459 FILE LOCATION: C:\Users\fxstdpc- admin\Desktop\30_UG??\Mioga_SFP_UG_FM\Mioga_SFP_UG_FM\section28.fm DELL CONFIDENTIAL – PRELIMINARY 9/13/10 - FOR PROOF ONLY Action Yes No 1 Ensure that the standard 250-sheet tray is properly inserted. Does this solve your problem?The task is complete.Proceed to the action corresponding to the type of the print media being used: • Thick - 2a • Thin - 2b • Coated - 2c • Envelope - 2d If performing manual duplex printing, go to action 2e. If using paper other than the above or if not performing manual duplex printing, go to action 2f. 2a Use thick paper that is 216 g/m 2 or less. Does this solve your problem?The task is complete.Go to action 3a. 2b Use thin paper that is 60 g/m 2 or more. Does this solve your problem?The task is complete.Go to action 3a. 2c Load coated paper one sheet at a time. Does this solve your problem?The task is complete.Go to action 3b. 2d Ensure that the envelope is properly loaded in the Standard 250-sheet tray as instructed in Loading Envelopes in the Standard 250-Sheet Tray and Optional 250-Sheet Feeder. Does this solve your problem?The task is complete.Go to action 3c.
460Troubleshooting Guide FILE LOCATION: C:\Users\fxstdpc- admin\Desktop\30_UG??\Mioga_SFP_UG_FM\Mioga_SFP_UG_FM\section28.fm DELL CONFIDENTIAL – PRELIMINARY 9/13/10 - FOR PROOF ONLY SSF Misfeed Jam 2e Ensure that the print media is not curled. Does this solve your problem?The task is complete.Go to action 3a. 2f Is the print media damp? Go to action 3d. Go to action 3a. 3a Fan the print media. Does this solve your problem?The task is complete.Go to action 3b. 3b Wipe the retard roller in the standard 250-sheet tray with a cloth moistened with water. Does this solve your problem?The task is complete.Go to action 4b. 3c If the envelope is deformed, correct it or use another envelope. Does this solve your problem?The task is complete.Go to action 3a. 3d Turn over the print media. Does this solve your problem?The task is complete.Go to action 4a. 4a Use print media that is not damp. Does this solve your problem?The task is complete.Go to action 3a. 4b Replace the PHD unit if you have a spare unit. Does this solve your problem?The task is complete.Contact Dell. Action Yes No
Troubleshooting Guide461 FILE LOCATION: C:\Users\fxstdpc- admin\Desktop\30_UG??\Mioga_SFP_UG_FM\Mioga_SFP_UG_FM\section28.fm DELL CONFIDENTIAL – PRELIMINARY 9/13/10 - FOR PROOF ONLY Action Yes No 1 Ensure that the SSF is properly inserted. Does this solve your problem?The task is complete.Proceed to the action corresponding to the type of the print media being used: • Thick - 2a • Thin - 2b • Coated - 2c • Envelope - 2d If performing manual duplex printing, go to action 2e. If using paper other than the above or if not performing manual duplex printing, go to action 2f. 2a Use thick paper that is 216 g/m 2 or less. Does this solve your problem?The task is complete.Go to action 3a. 2b Use thin paper that is 60 g/m 2 or more. Does this solve your problem?The task is complete.Go to action 3a. 2c Load coated paper one sheet at a time. Does this solve your problem?The task is complete.Go to action 3b. 2d Ensure that the envelope is properly loaded in the SSF as instructed in Loading an Envelope in the SSF. Does this solve your problem?The task is complete.Go to action 3c. 2e Ensure that the print media is not curled. Does this solve your problem?The task is complete.Go to action 3a.
462Troubleshooting Guide FILE LOCATION: C:\Users\fxstdpc- admin\Desktop\30_UG??\Mioga_SFP_UG_FM\Mioga_SFP_UG_FM\section28.fm DELL CONFIDENTIAL – PRELIMINARY 9/13/10 - FOR PROOF ONLY Optional 250-Sheet Feeder Misfeed Jam 2f Is the print media damp? Go to action 3d. Go to action 3a. 3a Fan the print media. Does this solve your problem?The task is complete.Go to action 3b. 3b Wipe the retard roller in the SSF tray with a cloth moistened with water. Does this solve your problem?The task is complete.Go to action 4b. 3c If the envelope is deformed, correct it or use another envelope. Does this solve your problem?The task is complete.Go to action 3a. 3d Turn over the print media. Does this solve your problem?The task is complete.Go to action 4a. 4a Use print media that is not damp. Does this solve your problem?The task is complete.Go to action 3a. 4b Replace the PHD unit if you have a spare unit. Does this solve your problem?The task is complete.Contact Dell. Action Yes No 1 Ensure that the optional 250-sheet feeder is properly inserted. Does this solve your problem?The task is complete.Go to action 2. 2 Ensure the right hand cover is closed. Does this solve your problem?The task is complete.Proceed to the action corresponding to the type of the print media being used: Thick - 3a Thin - 3b Manual Dup - 3c Others - 3d Action Yes No
Troubleshooting Guide463 FILE LOCATION: C:\Users\fxstdpc- admin\Desktop\30_UG??\Mioga_SFP_UG_FM\Mioga_SFP_UG_FM\section28.fm DELL CONFIDENTIAL – PRELIMINARY 9/13/10 - FOR PROOF ONLY Regi Jam (Exit Sensor On JAM) Exit Jam (Exit Sensor Off JAM) 3a Use thick paper that is 105 g/m2 or less. Does this solve your problem?The task is complete.Go to action 4a. 3b Use thin paper that is 60 g/m 2 or more. Does this solve your problem?The task is complete.Go to action 4a. 3c Ensure that the print media is not curled. Does this solve your problem?The task is complete.Go to action 4a. 3d Is the print media damp? Go to action 4c. Go to action 5. 4a Fan the print media. Does this solve your problem?The task is complete.Go to action 4b. 4b Wipe the retard roller in the optional 250-sheet feeder with a cloth moistened with water. Does this solve your problem?The task is complete.Contact Dell. 4c Turn over the print media. Does this solve your problem?The task is complete.Go to action 4a. 5 Use print media that is not damp. Does this solve your problem?The task is complete.Go to action 4a. Action Yes No 1 Ensure that the PHD unit is installed correctly. Does this solve your problem?The task is complete.Go to action 2. 2 Replace the PHD unit if you have a spare unit. See Replacing the Print Head Device (PHD) Unit . Does this solve your problem?The task is complete.Contact Dell. Action Yes No 1 Ensure the fuser is installed correctly. Does this solve your problem?The task is complete.Contact Dell. Action Yes No
464Troubleshooting Guide FILE LOCATION: C:\Users\fxstdpc- admin\Desktop\30_UG??\Mioga_SFP_UG_FM\Mioga_SFP_UG_FM\section28.fm DELL CONFIDENTIAL – PRELIMINARY 9/13/10 - FOR PROOF ONLY Standard 250-Sheet Tray/Optional 250-Sheet Feeder Multi-feed Jam SSF Multi-feed Jam Action Yes No 1 Ensure that the tray is properly inserted. Does this solve your problem?The task is complete.If using coated paper, go to action 2. If using other type of print media, go to action 3. 2 Load coated paper one sheet at a time. Does this solve your problem?The task is complete.Go to action 4. 3 Use print media that is not damp. Does this solve your problem?The task is complete.Go to action 4. 4 Fan the print media. Does this solve your problem?The task is complete.Go to action 5. 5 Wipe the retard roller in the tray where the multi- feed occurred with a cloth moistened with water. Does this solve your problem?The task is complete.Contact Dell. 1 Ensure the media type you are using. If using coated paper, go to action 2. If using other type of print media, go to action 3.-- 2 Load coated paper one sheet at a time. Does this solve your problem?The task is complete.Go to action 4. 3 Use print media that is not damp. Does this solve your problem?The task is complete.Go to action 4. 4 Fan the print media. Does this solve your problem?The task is complete.Go to action 5. 5 Wipe the retard roller in the tray where the multi- feed occurred with a cloth moistened with water. Does this solve your problem?The task is complete.Contact Dell.
Troubleshooting Guide465 FILE LOCATION: C:\Users\fxstdpc- admin\Desktop\30_UG??\Mioga_SFP_UG_FM\Mioga_SFP_UG_FM\section28.fm DELL CONFIDENTIAL – PRELIMINARY 9/13/10 - FOR PROOF ONLY Noise Action Yes No 1 To specify the cause of the noise, perform the Auto Registration Adjustment. Does this solve your problem? Go to action 2. Go to action 3. 2 Replace the PHD unit if you have a spare unit. Does this solve your problem? The task is complete.Contact Dell. 3 Replace the toner cartridge (K). See Replacing the Toner Cartridges.The task is complete. (The toner cartridge (K) you are using has been damaged. Replace it with a new one.)Go to action 4. 4 Replace the toner cartridge (Y). See Replacing the Toner Cartridges.The task is complete. (The toner cartridge (Y) you are using has been damaged. Replace it with a new one.)Go to action 5. 5 Replace the toner cartridge (M). See Replacing the Toner Cartridges.The task is complete. (The toner cartridge (M) you are using has been damaged. Replace it with a new one.)Go to action 6.
466Troubleshooting Guide FILE LOCATION: C:\Users\fxstdpc- admin\Desktop\30_UG??\Mioga_SFP_UG_FM\Mioga_SFP_UG_FM\section28.fm DELL CONFIDENTIAL – PRELIMINARY 9/13/10 - FOR PROOF ONLY 6 Replace the toner cartridge (C). See Replacing the Toner Cartridges.The task is complete. (The toner cartridge (C) you are using has been damaged. Replace it with a new one.)Contact Dell.
Troubleshooting Guide467 FILE LOCATION: C:\Users\fxstdpc- admin\Desktop\30_UG??\Mioga_SFP_UG_FM\Mioga_SFP_UG_FM\section28.fm DELL CONFIDENTIAL – PRELIMINARY 9/13/10 - FOR PROOF ONLY Problems With Installed Optional Accessories If an option does not operate correctly following installation or stops working: • Turn off the printer, wait for 10 seconds, and then turn on the printer. If this does not fix the problem, unplug the printer, and check the connection between the option and the printer. • Print the printer settings report to see if the option is listed in the Installed Options list. If the option is not listed, re-install it. See Printing Printer Settings Report. • Ensure the option is selected in the printer driver you are using. The following table lists printers option and corrective action for related problem. If the suggested corrective action does not correct the problem, call customer service. Other Problems Problem Action 250-sheet feeder • Ensure the 250-sheet feeder is correctly installed on the printer. Re-install the feeder. See Removing the Optional 250-Sheet Feeder and Installing the Optional 250-Sheet Feeder. • Ensure the print media is loaded correctly. See Loading Print Media in the Standard 250-Sheet Tray and the Optional 250-Sheet Feeder for more information. Memory module• Ensure the memory module is securely connected to the memory connector. Wireless printer adapter• Ensure the wireless printer adapter is securely inserted to the correct slot. Problem Action Condensation has occurred inside the printer.This usually occurs within several hours after you heat the room in winter. This also occurs when the printer is operating in a location where relative humidity reaches 85% or more. Adjust the humidity or relocate the printer to an appropriate environment.
468Troubleshooting Guide FILE LOCATION: C:\Users\fxstdpc- admin\Desktop\30_UG??\Mioga_SFP_UG_FM\Mioga_SFP_UG_FM\section28.fm DELL CONFIDENTIAL – PRELIMINARY 9/13/10 - FOR PROOF ONLY CTD Sensor Error Error 009-340 Code:xx Restart Printer, Check CTD Unit 092-910 Clean CTD Sensor, or Check CTD Unit 092-310 is displayed.Clean the CTD sensor. See Cleaning the CTD Sensor. Authentication error has occurred. The account is not registered. Please contact the system administrator. 016- 757 is displayed on the Status Monitor.Contact your system administrator. Function unavailable. It is a function that cannot be used. Please contact the system administrator. 016- 758 is displayed on the Status Monitor.Contact your system administrator. Printable page limit reached. Printable page limit reached, cannot print. Please contact the system administrator. 016- 759 is displayed on the Status Monitor.Contact your system administrator. Problem Action